Top Rear Sight For Afront Sight

In Plain Sight (A Joe Pickett Novel)

  • HIVIZ LiteWave Front and Rear Sight Combo for Ruger 10/22 rifles.
  • Fits Standard models with 18.5" barrel, Carbine and Takedown models.
  • Rear sight is elevation adjustable and foldable..
  • Front and sight includes Green, Red, and White replaceable LitePipes..
  • Rear sight includes Green and Red replaceable Litepipes..
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

Bugleman Offset Fiber Optics Flip Up Iron Sight 45 Degree Flip-up Front and Rear Sights with Red and Green Fiber Sights Compatible for Picatinny Weaver Rail

  • ❖【1/2 MOA elevation & Simple to Flip up】1/2 MOA elevation Milled Premium T6-6061 Aircraft Aluminum Alloy 45 Degree Offset Flip Up Front and Rear Sight with a simple press the spring load button. Low-profile sights only extend 2" above top rail, don't interfere with primary optics or military IR illuminator /laser sight. Ambidextrous sights easily and securely mount to Picatinny rails..
  • ❖【Dual Front Sight Adjustment Tool Included】A2 Front Sight is completely adjustable for Elevation. Dual Front Sight Adjustment Tool Included! This tool has dual ends to work with both 4 and 5 prong front sights ( A1 / A2 Style ) Very well made solid Steel construction. It sells for $10 by itself on Amazon!.
  • ❖【Rear Sight - Two Mode & Precise Aiming】Switch between CQB and Precision by dual aperture design. With the scale mark on the rear sight, you can rotate the knob for a proper aiming position by simple windage adjustment..
  • ❖【Durable & Lightweight & Solid】Precision Machined Out of Premium T6-6061 Aircraft Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, High Quality, Build No Wobble, Offer Durable & Lightweight & Solid Safe Performance In The Field. Especially designed for any hunting or tactical rifle with Picatinny Rail or W....
Check Stock

Marmot Flip Up Iron Sights A2 Front Sight & Rear Sight for Gun Rifle Handgun

  • Iron Sights:A2 Front Sight post is fully Adjustable for Elevation.Rear Sight Dual Aperture Windage Adjustment..
  • Low Profile Flip Up Design:Milled Aluminum Flip Up Front and Rear Sight Lay Flat with Pushing Button,Fold Them to Aim by Hand without Pushing Button.
  • Construction:Aircraft Grade Aluminum and Matte Black Anodized Finish..
  • Picatinny Weaver Rail:21.4mm Standard Picatinny Weaver Rail..
  • Both Precision and CQB Apertures on Rear Sight Standard AR Front Sight Post on Front.
Check Stock

Trijicon Springfield XDS HD Night Sight Set Orange Front Outline

  • HIGH VISIBILITY COLORED FRONT SIGHT POST: Glow-in-the-dark photoluminescent paint aids visibility and quicker target acquisition in transitional light.
  • SUBDUED REAR SIGHT: Angled and serrated surface to reduce glare, and black painted rings to enhance focus on front sight.
  • "U" NOTCH REAR SIGHT: Specifically designed rear notch enhances front sight acquisition.
  • TRITIUM-PHOSPHOR LAMP: Tritium-filled glass lamp provides superior illumination in no light or low light settings.
Check Stock

Ruger Rear Sight Blade for GP100 Redhawk and Super Redhawk Revolvers 90036

  • HIVIZ LiteWave Front and Rear Sight Combo for Ruger 10/22 rifles.
  • Fits Standard models with 18.5" barrel, Carbine and Takedown models.
  • Rear sight is elevation adjustable and foldable..
  • Front and sight includes Green, Red, and White replaceable LitePipes..
  • Rear sight includes Green and Red replaceable Litepipes..
Check Stock

Black Site (E.R.P. Remix)

  • More Visible- Easy visibility of the S27 fiber optics iron sight with red and green dot.
  • Quick to deploy with flip-up design, simply push the button and folded down, they must be manually flipped up(no spring assisted pop-up), allowing for quick deployment..
  • Dual Aiming Aperture- Rear sight has dual aperture for quick target acquisition with windage adjustment, perfect for short and long distance..
  • Machined from lightweight and extremely durable aluminum, Mil-Spec hard anodized..
  • Front Sight- A2 post Elevation adjustment (Adjustment Tool not included).
  • Rear Sight- micro style windage knob features same MOA adjustment as standard sight..
  • Easy Installation on Rail - Allen wrench included, low profile flip-up sight set designed to mount on standard picatinny and weaver rails..
Check Stock

Twod Flip up Rifle Sight Double Aperture Iron Sights Picatinny Spare Front and Rear Scope

  • Quick switch: flip-type backup sight, just press the button to fold down, you can quickly switch the main sight.
  • Adjustable: the height of the front sight can be adjusted by the A2 front sight tool (sold separately), and the wind resistance of the rear sight can be adjusted by the knob.
  • Double Aperture: The rear sight can switch the aperture, and the precision aperture or CQB aperture can be selected according to the target distance.
  • Quality: Aluminum alloy thin iron sight black matte anodized treatment.6-Month Warranty for Quality and Service Gurantee.
  • Installation method: suitable for Picatinny and Weaver guide rail (with hexagon wrench).
Check Stock

Moscow Drill Barrel Of The Glock (Instrumental) [Explicit]

  • Rear sight pusher will work with 90 degree and 30 degree rear sight profiles. Sig Sauer, H&K, CZ, Glock, S&W, and more..
  • Both side witness windows tool frame to check sight alignment.
  • Sight tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice.
  • Heavy duty Blue Anodized aluminum frame with steel tools.
  • A must-have tool for removal, Installation, and Adjusting windage of dovetailed rear sights for most Semi-Auto Pistol slides..
Check Stock

Where Are They Now: San Diego

  • More Visible- Easy visibility of the S27 fiber optics iron sight with red and green dot.
  • Quick to deploy with flip-up design, simply push the button and folded down, they must be manually flipped up(no spring assisted pop-up), allowing for quick deployment..
  • Dual Aiming Aperture- Rear sight has dual aperture for quick target acquisition with windage adjustment, perfect for short and long distance..
  • Machined from lightweight and extremely durable aluminum, Mil-Spec hard anodized..
  • Front Sight- A2 post Elevation adjustment (Adjustment Tool not included).
  • Rear Sight- micro style windage knob features same MOA adjustment as standard sight..
  • Easy Installation on Rail - Allen wrench included, low profile flip-up sight set designed to mount on standard picatinny and weaver rails..
Check Stock

Trijicon H&K P30/45C HD Front Outline Night Sight Set, Orange

  • HIGH VISIBILITY COLORED FRONT SIGHT POST: Glow-in-the-dark photoluminescent paint aids visibility and quicker target acquisition in transitional light.
  • SUBDUED REAR SIGHT: Angled and serrated surface to reduce glare, and black painted rings to enhance focus on front sight.
  • "U" NOTCH REAR SIGHT: Specifically designed rear notch enhances front sight acquisition.
  • TRITIUM-PHOSPHOR LAMP: Tritium-filled glass lamp provides superior illumination in no light or low light settings.
Check Stock

Trijicon S&W M&P Shield HD Night Sight Set, Orange Front Outline

  • HIGH VISIBILITY COLORED FRONT SIGHT POST: Glow-in-the-dark photoluminescent paint aids visibility and quicker target acquisition in transitional light.
  • SUBDUED REAR SIGHT: Angled and serrated surface to reduce glare, and black painted rings to enhance focus on front sight.
  • “U” NOTCH REAR SIGHT: Specifically designed rear notch enhances front sight acquisition.
  • TRITIUM-PHOSPHOR LAMP: Tritium-filled glass lamp provides superior illumination in no light or low light settings.
  • FITS SMITH & WESSON MODELS: M&P SHIELD .40, .45, & 9mm.
Check Stock