Top Rebar Caps 1

Diablo 7pc Rebar Demon SDS-Plus 4-Cutter Full Carbide Head Hammer Bit Set

• Diablo made Dura-Carbide withstands impact and high heat applications, dramatically extending life versus standard hammer bits.
• Precision Tip delivers stability and accuracy required for fast, precise holes.
• Optimized four-flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability.
• Includes: (1) DMPL4110 5/16 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4140 3/8 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4180 1/2 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4070 1/4 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4060 1/4 in. x 4 in. Rebar Demon Hammer Bit, (1) DMPL4030 3/16 in. x 4 in. Rebar Demon Hammer Bit, (1) DNTSS516 5/16 in. Magnetic Nut Setter.

Prescott Plastics 4 Inch Square Vinyl Plug Insert, Black Rubber Flexible End Cap for Metal Tubing, Fence, Glide Insert for Pipe Post and Furniture (4 Pack)

• HOW TO FIT: Fits 4 square tube or pipe (4x4 OUTSIDE diameter) & can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1 deep / tall to provide a secure fit..
• FLOORING PROTECTION: High-grade Prescott Plastics brand black soft PVC "rubber like" caps are made in the USA. Our caps are designed to hold up against impact abuse, and harsh weather conditions to provide years of protection..
• PREMIUM QUALITY PLUGS: Our flexable end caps work great for preventing scuffs on kitchen or wood floor, as pliable protective seal for metal chair tips, patio furniture, bench feet, table legs, bar stools, or to cover any square pole or hole..
• EASY TO INSTALL: These easy to install 4.0 four inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, flexible rod / rebar or wrought iron tube caps, thread bolt screw or nut safety, hub cap sheath, or finishing any sqaure tubing..

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

• 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
• 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
• Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
• Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

• 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
• 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
• Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
• Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

• Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
• 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
• Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
• Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

• Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
• 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
• Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
• Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....

Prescott Plastics 3/8 Inch White Round Vinyl Rubber Cap, FDA Food Grade, Flexible Pipe Post Cover (10)

• HOW TO FIT: Fits 3/8" OD round tube or pipe (*OUTSIDE diameter) & can stretch for a snug fit without tearing or splitting. 1/2" tall / deep to provide a secure fit..
• EASY TO INSTALL: Our 3/8" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
• PROTECTION: .375 inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project.
• PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
• MADE IN USA: These Plastic Plugs are specially designed and produced in USA to maintain quality, endurance and durability..

Prescott Plastics 8 Pack: 1 1/4 Inch Round Rubber Hole Plugs, Black Vinyl End Cap, Flexible Pipe Post Rubber Cover, Rubber Caps for Metal Tubing, Fences, Glide Protection from Chair Legs and Furniture

• HOW TO FIT: Fits 1 1/4" round OD tube or pipe ( 1-1/4" OUTSIDE diameter) & can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1" deep / tall to provide a secure fit..
• EASY TO INSTALL: These Rubber plugs for holes are easy to install 1.25 inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project..
• FLOORING PROTECTION: Prescott Plastics black ribbed plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, table legs, bar stools, patio furniture, and other furniture designed for furniture inserts and plugs.
• PREMIUM QUALITY PLUGS: Our plugs and caps are designed to hold up in all harsh weather conditions and high traffic areas..
• MADE IN USA: These Plastic plugs are specially designed and produced in USA to maintain quality, endurance and durability..

Diablo 6pc SDS+ Rebar Demon 4-Cutter Full Carbide Head Hammer Drill Bit & Chisel

• Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity. Optimized four-flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability..
• Chisels are ideal for general demolition and clearing reinforcements.
• A unique heat treatment process strengthens the chisel for impact resistance and stability.
• Includes: (1) DMPL4140 3/8" x 6" Rebar Demon Hammer Bit, (1) DMPL4060 1/4" x 4" Rebar Demon Hammer Bit, (1) DMPL4040 3/16" x 6" Rebar Demon Hammer Bit, (1) DMPL4020 5/32" x 6" Rebar Demon Hammer Bit, (1) 5-3/8" Flat Chisel, (1) 5-3/8" Point Chisel.

Prescott Plastics 1 1/2' (38.1 mm) Round Rubber Hole Plugs, Vinyl End Caps, Black Rubber Caps for Metal Tubing, Fences, Glide Protection for Chair Legs and Furniture (8 Pack)

• HOW TO FIT: Fits (Outside Dimension) of 1 1/2" round tube or pipe (*THIS IS NOT the hole size*) & can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1" deep / tall to provide a secure fit..
• EASY TO INSTALL: These Vinyl Covers are easy to install 1 ½” push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project..
• FLOORING PROTECTION: These high-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
• PREMIUM QUALITY PLUGS: Our PVC Rubber Caps are designed to hold up in all harsh weather conditions and high traffic areas..
• MADE IN USA: These Vinyl End Covers are specially designed and produced in USA to maintain quality, endurance and durability..

25x Rebar Impalement Safety Cap Type S - OSHA Square - (10M-25M) Rebar Size: #3-#7 (25 Pack)

Tingyuan Galvanized Rebar Stakes 12 inch Heavy Duty J Hooks Ground Anchor for Fence Swing Tent 12 Pack

• 【Suitable Size】Each ground anchor is approximately 12 inch long, 3/8 inch diameter. Hook inner diameter is 1-1/2 inch, bend part is 3.5 inch..
• 【Pack of 12】Each package contains 12pcs steel rebar J hook ground anchor stakes..
• 【Wide Applications】Chisel pointed ends are suitable for hard soils or rocky. They can go nice and deep. J hooks are used to fix fences, swings,....
• 【Superior Material】Rebar stakes are made of premium heavy duty steel rebar, very strong and can be used with confidence..
• 【Reusable Stakes】12 inch rebar stakes are galvanized. Theyre applied premium hot-dip galvanizing. So they are anti-rust and can be reused for a....