Top Rebar Tier

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

• Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
• 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
• Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
• Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

• Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
• 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
• Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
• Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....

Diablo 7pc Rebar Demon SDS-Plus 4-Cutter Full Carbide Head Hammer Bit Set

• Diablo made Dura-Carbide withstands impact and high heat applications, dramatically extending life versus standard hammer bits.
• Precision Tip delivers stability and accuracy required for fast, precise holes.
• Optimized four-flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability.
• Includes: (1) DMPL4110 5/16 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4140 3/8 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4180 1/2 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4070 1/4 in. x 6 in. Rebar Demon Hammer Bit, (1) DMPL4060 1/4 in. x 4 in. Rebar Demon Hammer Bit, (1) DMPL4030 3/16 in. x 4 in. Rebar Demon Hammer Bit, (1) DNTSS516 5/16 in. Magnetic Nut Setter.

Happybuy Hydraulic Rebar Cutter 1/4' - 7/8' / 4 mm - 22mm,Concrete Construction Tool 13Ton,Handheld Rebar Cutter G-22 w/Box,Steel Bolt Chain Cutting tool

• Pure Copper Coil Motor: This electric rebar cutter features a 900W pure copper coils motor to ensure higher reliability, which means excellent motivation yet low noise. The motor runs more smoothly to achieve the minimum friction and the minimum power consumption..
• Super-Fast Cutting Speed: The hydraulic rebar cutter can cut rebar within 2.5-3.0 seconds without sparks and sentiments, which can satisfy your various cutting demand. Cutting capacity ranges from 3/20" (4mm) #3 Min. Rebar to 5/8" (16mm) #5 Max. Rebar..
• High-quality Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed heads can offer quick and accurate cutting while providing double stability and sealability..
• Adjustable Bolt Design: This hydraulic cutter comes with an adjustable bolt-on to make it convenient when cutting rebar of various sizes. The rebar cutting machine we designed has low noise and a low failure rate, which is very helpful for work..
• Easy Storage & Widely Used: We provide you with a high-quality protective box for better storage. The compact body makes it effortless to carry anywhere. This electric rebar cutter is mainly used in constr....

Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN

• Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life..
• Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly..
• Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security..
• Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend..
• Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward..

Ground Anchors U Shaped Rebar Stakes 12 Inch Heavy Duty Galvanized Steel Stake for Camping Tents Swing Set Fence 6 Pack

• 【Wide Applications】U shape rebar stakes are used to fix fences, swings, tents, trampoline，etc. Chisel pointed ends are suitable for hard soils....
• 【Superior Material】Rebar stakes are made of premium heavy duty steel rebar, very strong and can be used with confidence..
• 【Reusable Stakes】12 inch rebar stakes are galvanized. Theyre applied premium hot-dip galvanizing. So they are anti-rust and can be reused for a....
• 【Suitable Size】Each ground anchor is approximately 12 inch long, 3/8 inch diameter. U shape inner diameter is 2 inch..
• 【Pack of 6】Each package contains 6pcs steel rebar ground anchor stakes..

HAKZEON 90 Packs Rebar Safety Caps, 2.36 x 2.16 Inch Plastic Rebar Mushroom Cap, Vivid Orange Protective Caps, Safety Product for Construction Industry, Fits Rebar Dia 10-30MM

• HIGH-QUALITY PLASTIC MATERIAL - These reinforced rebar protection caps are made of premium industrial-grade plastics, which are very hard and durable with strong compression resistance, wear resistance, and will not be easily deformed. Work great covering iron stakes on the ground..
• GREAT VISUAL REMINDER - The bright and lively orange provides you with a high visibility and is easy to find and use, which makes rebar end caps useful markers. Simply insert them into the end of the steel bar to prevent its wear and prevent injuries..
• 90 PACKS FOR VARIOUS USES - Each rebar safety cap size is 2.16 x 2.36 inches ( 50x60 mm), and it is very lightweight but sturdy and durable to last, allowing you take it everywhere and store easily. Suitable for the rebar with a diameter in 0.39~1.18 inches (10-30mm)..
• PRACTICAL AND MULTIPURPOSE - These rebar mushroom caps help protect the exposed rebar from wear and damage. They are very powerful protective covers, essential safety supplies for construction sites, and are also suitable for marking the end of the stakes in courtyard or garden..
• SATISFYING SHOPPING - We HAKZEON store promises to provide you with a 100% refund guarantee, so that you enjoy a satisfactory shopping experience. If you have any product quest....

SEUNMUK 60 PCS Orange Plastic Mushroom Rebar Caps, Rebar Safety Caps, End Caps for Rebar Stakes #3-#7, 10M - 25M

• HIGH-QUALITY PLASTIC - Our rebar safety caps are made of high-quality PP which is wearable, long-lasting and impact resistant. They will not easily crack or break outdoor under all weather conditions..
• SAFE& HIGHLY VISIBLE- These plastic mushroom rebar caps are made to protect. They are used in construction site to protect the steel rebar pipes from exposing and damaging and prevent injuries. Bright orange is the warning color, also be good as a visual marker to prevent people from accidentally getting hurt. It can fit to #3-#7, 10mm - 25mm rebar sizes..
• SIMPLE TO INSTALL - They’re also very easy to install by simply pressing in the caps. They are good for protecting from abrasions and injuries but can’t protect against impalement..
• WIDELY USED - Rebar caps are perfect to use in outdoor construction sites and stay over years. Ideal for building construction sites protection. With the high visibility, they can also be good to use as property markers..
• SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with the rebar safety caps, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..

Huanyu Electric Rebar Bender 900W Hydraulic Rebar Bending Machine 5/8Inch #5 16mm Rebar within 5s Bending Angle 0°-130° with Positioning Bolt Fast Easy Bending Rebar Steel Bar Steel Rod 110V RB-16

• 【Powerful 900W Pure Copper Motor】Huanyu Electric Rebar Bender adopts 900W pure copper motor with strong power. It can bend 5/8inch (#5 16mm) rebar 0-130° within 5s. Low noise and low failure rate when running. Longer service life..
• 【Solid Machine Body】Huanyu Rebar Bending Machine adopts sturdy cast iron body and high-strength bend block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender..
• 【Easy to Operate】One button operation. Keep the switch pressed and the bending block starts to push forward. Huanyu Steel Bender is equipped with an adjustable positioning bolt. You can mark on it to control the rebar bending angle. After the rebar is bent, pull the relief valve and piston returns to its original position..
• 【Humanized Design】Ergonomically designed rear handle and side handle (detachable) for comfortable grip and easy operation. Integral workbench base design. You can lay the bender on a flat surface to operate. Stable and effortless. Save your back!.
• 【Excellent Service】NOTE: We support customized service of 220V voltage to meet your needs.1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge....

Diablo 6pc SDS+ Rebar Demon 4-Cutter Full Carbide Head Hammer Drill Bit & Chisel

• Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity. Optimized four-flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability..
• Chisels are ideal for general demolition and clearing reinforcements.
• A unique heat treatment process strengthens the chisel for impact resistance and stability.
• Includes: (1) DMPL4140 3/8" x 6" Rebar Demon Hammer Bit, (1) DMPL4060 1/4" x 4" Rebar Demon Hammer Bit, (1) DMPL4040 3/16" x 6" Rebar Demon Hammer Bit, (1) DMPL4020 5/32" x 6" Rebar Demon Hammer Bit, (1) 5-3/8" Flat Chisel, (1) 5-3/8" Point Chisel.

Crescent H.K. Porter 3/8' (#3) and 1/2' (#4) Extendable Indexing Rebar Bender, RB4, Red/Black

Tingyuan Galvanized Rebar Stakes 12 inch Heavy Duty J Hooks Ground Anchor for Fence Swing Tent 12 Pack

• 【Suitable Size】Each ground anchor is approximately 12 inch long, 3/8 inch diameter. Hook inner diameter is 1-1/2 inch, bend part is 3.5 inch..
• 【Pack of 12】Each package contains 12pcs steel rebar J hook ground anchor stakes..
• 【Wide Applications】Chisel pointed ends are suitable for hard soils or rocky. They can go nice and deep. J hooks are used to fix fences, swings,....
• 【Superior Material】Rebar stakes are made of premium heavy duty steel rebar, very strong and can be used with confidence..
• 【Reusable Stakes】12 inch rebar stakes are galvanized. Theyre applied premium hot-dip galvanizing. So they are anti-rust and can be reused for a....