Top Rectangular Exhaust Tips

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

  • Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
  • Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
  • Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
  • Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
  • Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

2 Pcs Stainless Polished Muffler Exhaust Tip Finisher Compatible with 2016-2020 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System (Will Not Fit Hatchback Sport or Si or Type-R).
  • Package includes: 2 x Exhaust Pipe Tip Finishers as Shown (Quantity 1 means 2 Exhaust Tips).
  • Made Of Stainless Steel Material in Nice Polished Chrome Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws.
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

KOBE Range Hoods IN2636SQB-650-5A Insert Range Hood, 36-Inch, Stainless Steel

  • Durable 18-gauge commercial grade Stainless steel with seamless design and Satin finish.
  • 6-speed electronic button with LED display and quietmode.
  • Bright 3W (x2) LED lights with 3-level Lighting to vividly illuminate your cooktop.
  • Exhaust: top 6 inch round, top 3-1/4 inch x 10 inch rectangular, rear 6 inch round, rear 3-1/4 inch x 10 inch rectangular.
  • Filters are dishwasher safe professional baffle filters allow for easy cleaning..
Check Stock

KOBE Range Hoods INX2636SQB-700-3 Built-in, Insert, Range, Hood, 3-Speed, 630 CFM, LED Lights, Baffle Filters, 36\

  • Durable 20-gauge commercial grade stainless steel with satin finish.
  • Bright 3W (x2) LED Lights to illuminate your cooktop.
  • Exhaust: top 6 inch round, top 3-1/4 inch x 10 inch rectangular, rear 6 inch round, rear 3-1/4 inch x 10 inch rectangular.
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Suzuki Dr-Z400 Dr-Z400E Dr-Z400S Dr-Z400Sm 2000-2017

  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This Billet exhaust tip fits on the end of your OEM Yamaha exhaust system increasing your rides overall performance and sound..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

Under Cabinet Range Hood 30 Inch Ducted, BRANO 900 CFM Kitchen Vent Hood, Brushed Stainless Steel Ultra Quiet Kitchen Exhaust Fans With Baffle Filters, LED Lights, 3-Speed Mechanical Control

  • ...brushed stainless steel that is durable, rust proof and easy to clean. Equipped with mechanical push buttons to control switches, speed and lights. Every round angle design will protect your head from hitting. Also provide 3 exhaust options, ducts are not included, you can connect the ductwork to the top ( round or rectangular exhaust) or rear (rectangular exhaust) of the range hood, it with installed with a power cord..
  • 【EFFICIENT AND QUIET】: Powerful kitchen range hoods with dual chamber centrifugal ultra-quiet motor, power up to 156W. Customize your kitchen stove vent with the 3 speeds setting to play with the suction and noise level. Maximum 900 CFM large airflow and balancing fans will efficiently removes large amounts of smoke and cooking odors to keep your kitchen fresh. Also the noise level is only 10 decibels on the lowest setting and only 60 decibels max noise level. Please enjoy your cooking anytime..
  • 【PERMANENT FILTER】: The 30 inch vent hood with 2 baffle filters and the 36 inch vent hood with 3 baffle filters. The easy removable stainless steel baffle filters are dishwasher-safe or wiped with a wet cloth with warm water. No need to replace these filters to save you cost. Compared with standard aluminum mesh filters, they won't....
Check Stock

Under Cabinet Range Hood 36 Inch Ducted, BRANO 900 CFM Kitchen Vent Hood, Brushed Stainless Steel Ultra Quiet Kitchen Exhaust Fans With Baffle Filters, LED Lights, 3-Speed Mechanical Control

  • ...brushed stainless steel that is durable, rust proof and easy to clean. Equipped with mechanical push buttons to control switches, speed and lights. Every round angle design will protect your head from hitting. Also provide 3 exhaust options, ducts are not included, you can connect the ductwork to the top ( round or rectangular exhaust) or rear (rectangular exhaust) of the range hood, it with installed with a power cord..
  • 【EFFICIENT AND QUIET】: Powerful kitchen range hoods with dual chamber centrifugal ultra-quiet motor, power up to 156W. Customize your kitchen stove vent with the 3 speeds setting to play with the suction and noise level. Maximum 900 CFM large airflow and balancing fans will efficiently removes large amounts of smoke and cooking odors to keep your kitchen fresh. Also the noise level is only 10 decibels on the lowest setting and only 60 decibels max noise level. Please enjoy your cooking anytime..
  • 【PERMANENT FILTER】: The 30 inch vent hood with 2 baffle filters and the 36 inch vent hood with 3 baffle filters. The easy removable stainless steel baffle filters are dishwasher-safe or wiped with a wet cloth with warm water. No need to replace these filters to save you cost. Compared with standard aluminum mesh filters, they won't....
Check Stock

2 Pieces Titanium Black Chrome Muffler Exhaust Tip Finisher Compatible with 2016-2021 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System. Will Not Fit Hatchback Sport or Si Model. Exhaust May Need to be Adjusted For Installation..
  • Package Includes 2 x Exhaust Pipe Tip Cover as Shown. Quantity 1 Means 1 Pair of Tips.
  • Made Of Stainless Steel Material In Titanium Gunmetal Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws. Simply Slide in and Tighten up the Screw..
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock