Top Red Dot For Glock 43x Mos

Ade Advanced Optics Spike (RD3-018) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness..
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

Glock 43/43X Holster, IWB Kydex Holster Leather Interior w/ Claw & Optics Cut: Glock 43 / Glock 43X(Not Fit G43X MOS), Inside Waistband Concealed Carry, Adj. Retention & Cant, Right Hand

  • COMPATIBILITY: Compatible with Glock 43 and Glock 43X. Incompatible with Glock 43X MOS or any /laser/light..
  • KYDEX HOLSTER LEATHER INTERIOR: In order to avoid possible scratches of kydex holster and dropping risks of leather holster. We finally produced this kydex holster with leather interior, it possess kydex's durable and molded fit. Suede leather interior can avoid possible scratches when holstering and drawing.
  • OPTICS CUT: This Glock 43 holster is cut to accommodate wide variety of optics/red dot.
  • CLAW ATTACHMENT: Claw can eliminate printing made holster more concealable when carrying(We have equipped extra screws for carry without claw).
  • HAND POLISHED EDGE: All WARRIORLAND Kydex holsters edge are polished by hand for comfortable all day concealed carry.
Check Stock

Second Thoughts of an Idle Fellow

  • Carbon-Infused WeaponsGrade Ultralight Polymer Housing with the ROMEOZero/ Shield RMSc Footprint, Provides Increased Shock and Drop Protection.
  • Compatible with Springfield Hellcat OSP & GLOCK G43X MOS Pistols.
  • Aspherical Glass Lens with Zero Distortion.
  • Single Dot Reticle For Fast Target Acquisition.
  • T.A.P. (Touch-Activated Programming) and Button-Activated Brightness and Reticle Selection Modes.
Check Stock

SAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex

  • CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
  • Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
  • Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check Stock

Ade RD3-013-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button..
Check Stock

Ade RD3-012-G-MOS Green Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It also fits Non-Mos model that using a mounting plate to replace rear sight..
  • This GREEN dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
Check Stock

Ade Advanced Optics Spike Red Dot Sight for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS,Springfield Hellcat(OSP/PRO)

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness..
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
Check Stock

Outerimpact Red Dot Adapter/Mount for Glock Pistol - M.R.A

  • Compatible Guns: All Glock models except MOS verions.
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1272.
Check Stock

Ade RD3-012 Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation....
Check Stock

Ade RD3-012-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation....
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock