Top Red Dot Sight For Glock 26

Ade Advanced Optics rd3-012-G-1 6MOA Green Dot Micro Mini Reflex Sight for Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have....
  • This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes....
Check Stock

Ade Advanced Optics RD3-012-G Green Dot Micro Mini Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off.
  • Comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • This GREEN dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight. This glock MOS #01 plate need to obtain from glock, not included in this green dot purchase..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo..
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
Check Stock

Real Avid 4-in-1 Tool for Glock Handguns, Compact Gun Multitool with Front & Rear Sight Tool, Punch Tool & Gunsmithing Screwdriver for Cleaning & Maintaining Glock Pistols

  • FOR GLOCK PLATFORMS: Comprehensive armorer gun multitool is compatible with any Glock pistol..
  • FRONT SIGHT TOOL: Magnetic 3/16" hex driver fits stock and custom front sights, compatible with Glock night sights, aftermarket tall height sights, Truglo Glock sights, Trijicon Glock sights and more..
  • 3MM PUNCH DOWN TOOL: Essential Glock armorer tool fits all pins on any Glock gun.
  • aids gun disassembly for gun cleaning, pin removal and custom Glock accessories pin installation.
  • REAR SIGHT TOOL: . 050" Allen wrench allows for adjusting aftermarket rear sights for your Glock..
  • COMPACT GUNSMITHING TOOL: Small flat blade screwdriver helps prying slide lock spring & locking block. Also perfect for other accessories such as light, laser or red dot and Holster maintenance..
  • ERGONOMIC DESIGN: Sleek, lightweight frame stores all the tools and features push button release to snap open the tools..
  • COMPATIBLE: With Glock models, 19,17, 43, 26, 22, 48, 27, 45, 21, 42, 30, 34, 20, 44 and more..
Check Stock

Ade RD3-009-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Optics Ready Pistol such as Glock MOS System such as Gen4 17,19,34,35,40,41,43,43x and also fit Springfield OSP(non-hellcat), Canik TP9 SFX/Elite Combat(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot.
  • All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. For Non-MOS(non-optics ready) glock, search part number B01L9734Y6 on amazon for optic plate..
  • This red dot does NOT fits glock with AFTERMARKET/Non-Genuine Glock slide with custom optic cut for RMR because the footprint is different. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Comes with an Picatinny mounting plate. It does not comes with any other red dot mounting plate for a specific handgun, user need to purchase the plate separately for the plate made for the specific handgun..
  • Waterproof for 30mm under 3ft water. Shock/Fog Resistant.
Check Stock

8 Inches Heat-Resistant Suppressor Cover with Burn Proof Suppressor Wrap Sleeve Hunting & Shooting Accessory Protect Tactical Gears Better Conceal for Hunters

  • CONCEALMENT PADDLE HOLSTERS - Features a paddle attachment and standard belt loop for versatile concealed carry options.
  • SECURES WEAPON with ALS (Automatic Locking System) - Weapon is automatically locked into place once holstered, yet a natural draw with the swip of the thumb releases weapon quickly and easily.
  • PREMIUM GUN ACCESSORIES - Protect your handgun with SafariLaminate thermal-molded design and suede interior.
  • LIGHT, DURABLE GLOCK HOLSTER - Designed to carry Glock 19/23 Surefire X300U RED DOT SIGHT COMPATIBLE for red dot optic equipped weapon.
  • RED DOT SIGHT COMPATIBLE for red dot optic equipped weapon.
Check Stock

Mission First Tactical Holster Compatible with Glock 19 IWB

  • APPENDIX CARRY Inside the Waist Band holster will conceal your weapon and allow fast access for draw.
  • RED DOT SIGHT RDS for Trijicon or Vortex or any brand work with this holster no changing sights just clip in and go.
  • AMBIDEXTROUS wear right or left handed with 1.5inch belt clip adjustable cant from 0-20 degrees.
  • MATERIALS made from Superior .08 Boltaron not Kydex laser CAD design for perfect first made by hand.
  • The Box: 1 holster with belt clip fits, spacer, Compatible with GLOCK 19 17 26 9MM, 22 23 27 40SW and GLOCK 33 34 47.
Check Stock

Full Auto Ruger 10/22

  • Comes with an optic adapter/mounting plate to connect red dot sight to Ruger 10/22 and also a standard picatinny mount..
  • The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight..
  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Waterproof/Shockproof/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
Check Stock

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • ..., Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
Check Stock

Night Sights 3-Dot Glow in The Dark with Front and Rear Sights for Glock 17 17L 19 22 23 24 25 27 33 34 35 38 39, NO TRITIUM with Assembly Tools for Outdoor

  • Fits Glock 17, 19, 22-24, 26, 27, 31-36, 38, 45 – Generations 1-5.
  • XS 3-Dot Tritium Set With Orange Photoluminescent Glow Dot. Self-Illuminated Tritium Glows 24/7 Providing A Bright, Battery Free, Low Light Visible Sight Picture.
  • Photoluminescent Glow Dot Provides High Contrast Visibility In Bright Light, Absorbs Ambient Light, And Glows With The Self-Illuminated Tritium.
  • Blacked-Out Rear Sight Drives Focus To The Front Sight. Rear Sight Ledge Allows For One-Handed Slide Manipulations.
  • Steel Sights, Made In The USA. Glock Front Sight Tool Is Not Included.
Check Stock

XS SIGHTS 3-Dot Tritium Night Sights, Fits Glock Gen 1 – 5 +MOS Pistols, Dual Illuminated Orange Front Sight Equipped with Tritium/Photoluminescent Glow Dot (Glock 17, 19, 22-24, 26, 27, 31-36, 38)

  • Fits Glock 17, 19, 22-24, 26, 27, 31-36, 38, 45 – Generations 1-5.
  • XS 3-Dot Tritium Set With Orange Photoluminescent Glow Dot. Self-Illuminated Tritium Glows 24/7 Providing A Bright, Battery Free, Low Light Visible Sight Picture.
  • Photoluminescent Glow Dot Provides High Contrast Visibility In Bright Light, Absorbs Ambient Light, And Glows With The Self-Illuminated Tritium.
  • Blacked-Out Rear Sight Drives Focus To The Front Sight. Rear Sight Ledge Allows For One-Handed Slide Manipulations.
  • Steel Sights, Made In The USA. Glock Front Sight Tool Is Not Included.
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock