Top Reducing Nipple Fittings For Plumbing

Simpooltech Wide Mouth Skimmer Plug

  • For 1.5 inch smooth pipe or 1.75 inch fittings.
  • Rubber compression plug for winterizing pool plumbing.
  • Prevents freezing, expanding water from leaking out of the pool and cracking plumbing.
  • Nylon wing nut allows you to quickly plug your plumbing lines.
Check Stock

LOKMAN 50 Pack 1/2 Inch PEX Cinch Clamps, Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (1/2 Inch)

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system..
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
  • SIZE - 1/2 inch (17.5mm) PEX cinch clamp rings, fit for 1/2 inch PEX pipe..
Check Stock

FORMUFIT F012CRX-UV Cross PVC Fitting, Furniture Grade, 1/2\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration. 20% Deeper sockets than plumbing fittings..
  • WORKS WITH 1/2" SIZE PVC PIPE: Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0. 840"). Uses either off-the-shelf 1/2" Size pipe or FORMUFIT Furniture Grade PVC pipe..
  • MADE TO LAST, EVEN UNDER LIGHTS: UV resistant PVC material resists indirect sunlight and fluorescent lighting degradation. No yellowing, discoloration or cracking unlike sub-par PVC fittings.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

SharkBite 1/2, 3/4, 1 Inch PVC Disconnect Clip Set for Push to Connect Brass Plumbing Fittings, PVC IPS (Iron Pipe Size), UIP716A

  • SHARKBITE PVC DISCONNECT CLIP: 1/2, 3/4, and 1 inch disconnect tools are used to perfectly release a SharkBite PVC fitting from any white collar iron pipe-sized fittings.
  • can adjust or remove PVC SharkBite fittings in tight spaces for easy disassembly.
  • COMPATIBILITY: These push-to-connect fitting disconnect tools can be used to release the white collar of a SharkBite PVC fitting from schedule 40, 80, or 120 PVC pipe and schedule 40 and 80 CPVC.
  • ideal for marking proper safe seal insertion depth on a pipe for SharkBite fittings.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in....
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

SharkBite U714A Disconnect Clip, Push-to-Connect Fittings, SharkBite Fitting Removal Tool, 1 Inch

  • REMOVES IN SECONDS: 1 Inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustmentsREMOVES IN SECONDS: 1/4 inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustments.
  • COPPER, PEX, CPVC: SharkBite disconnect clip removes plumbing fittings that fit copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven and is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch PVC x 3/4 Inch CTS Ball Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 25551LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, HDPE, and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand....
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

1-1/4' 5-way Cross PVC Fitting Connector

  • DO NOT use these fittings for plumbing projects..
  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • 1-1/4" Fittings fit on 1-1/4" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 5-way Cross PVC Fitting Connector

  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Check Stock

SharkBite 3/8 Inch to 1 Inch Pro Push to Connect Disconnect Tool, PEX Pipe, Copper, CPVC, PE-RT, HDPE, PROD3810

  • SHARKBITE PRO PUSH-TO-CONNECT DISCONNECT TOOL: This SharkBite pro disconnect tool allows for brass plumbing fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push-to-connect fittings in tight spaces for easy disassembly.
  • EASY TO USE: This handy disconnect tool can remove any type of fitting from 3/8 inch to 1 inch.
  • does not require any installation or interchangeable faceplates to allow for comfortable and convenient use.
  • DURABLE AND HIGH QUALITY: Pex ring removal tool features comfortable rubber grips and is constructed with heavy-duty handle springs for optimal durability.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ...mperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool t....
Check Stock

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock