Top Reese Fifth Wheel Hitch Pins
EAZ-Lift 17-inch Gooseneck Adapter | Converts Fifth Wheel Trailers to Gooseneck Trailers | Easy to Install | (48490)
- Converts Fifth Wheel Trailer to Gooseneck: Adapts a fifth wheel trailer to fit gooseneck trailer hitch.
- The locking coupler attaches to any 2 5/16-inch gooseneck ball.
- Fit Type: Universal fit for all stationary pin boxes.
- Provides Easy Towing: Tows a fifth wheel trailer without a large hitch taking up the bed of truck.
- Simple to Hookup and Disconnect: Locking gooseneck coupler allows full range of motion for simple hookup and disconnect.
- Rating: Rated to 30,000 lb. (7,500 lb. vertical load).
- Easy to install: Includes all parts and hardware needed for installation.
Check StockCamp'N Fifth Wheel Hitch Lube Plate - 10' Ultra Low Friction Lube Disc
- ➊ ULTRA LOW FRICTION and wear resistant without that messy grease! Designed and engineered unlike the others with our high performing "dimple design" to reduce surface area contact.
- ➋ EXTENDS THE LIFE of your hitch pin plate and receiver by using the Camp'N Fifth Wheel Hitch Plate. The lube plate or disc takes the sacraficial beating while preserving your fifth wheel hitch.
- ➎ Please checkout the Camp'N Amazon Storefront for additional replacement rv parts.
Check StockAir Lift 57390 LoadLifter 5000 Air Suspension Kit
- Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride.
- Up to 5,000 pounds of load leveling capability.
- Easy to install with included detailed instructions.
- Fitment details listed in the product description. Lifetime Warranty with 60 day Ride Satisfaction Guarantee.
- Fits single-rear-wheel (SRW) and dual-rear-wheel (DRW) models. Will fit ALL models without a fifth-wheel hitch and will also fit most side mount fifth....
Check Stock5th Fifth Wheel to Gooseneck Hitch Ball Adapter Plate for Pickup Truck Bed Replacement for 49080- 25,000 lbs, 2-5/16-Inch Ball
- For reliable weather resistance, this gooseneck hitch adapter is shielded in a durable black powder coat. Performance tested for extreme weather conditions, cold, heat, vibration and impact..
- Easy installation and removal allows for full access to truck bed. Utilizes same base rails (#30035) as our fifth wheel hitches. Raised safety chain locations all for easy trailer connection. Includes 2-5/16 ball and 4 pins for installation..
- Precision and quality assured.Tab measures 15/32" x 1-1/2". Distance on center between the tabs, left to right: 10". Distance between the tabs front to back (opposite rails): 21-15/32". Distance from outside to outside of the tabs front to back (opposite rails): 22-13/32"..
- 2-5/16” heat treated ball. Ball is offset 2” to accommodate 6 & 8 ft. truck beds. Weight Carrying:6,250 lbs. (TW/GTW). Weight Distributing:25,000 lbs. (TW/GTW) Center of the ball is 10-1/2" from one end of the plate and 14-1/2" from the other. Curve in plate provides a 2" rise..
Check StockECOTRIC Universal Gooseneck Hitch Ball Adapter Plate for Standard 5th Fifth Wheel Rails Pickup Truck Bed Tow 25,000 lbs 2-5/16-Inch Hitch Ball
- ...Heavy Duty】 For reliable weather resistance, this gooseneck hitch adapter is shielded in a durable black powder coat. This tough finish easily outlasts exposure to rain, snow, dirt ..
- 【Easy Installation】 Easy installation and removal allows for full access to truck bed. Utilizes same base rails (#30035) as our fifth wheel hitches. Raised safety chain locations all for easy trailer connection. Includes 2-5/16 ball and 4 pins for installation..
- 【Mounting Tab Measurements】 Tab measures 15/32" x 1-1/2". Distance on center between the tabs, left to right: 10". Distance between the tabs front to back (opposite rails): 21-15/32". Distance from outside to outside of the tabs front to back (opposite rails): 22-13/32"..
Check StockShocker Impact Cushion Sway Control Combo Ball Mount 4\ Rise to 4\ Drop - 12,000lbs, Fits 2\ Hitch
- Dual cusihion hitch Sway control combo multi-ball mount with 2 sway control tabs for mounting the basic sway control arm bar(s) & mini balls (such as the Reese 83660 or Curt 17200 friction sway control kit).
- 7" of Adjustment - 4" of rise to 4" of drop. 7 adjustment holes that can be flipped around more drop or rise. 2" & 2-5/16" hitch balls.
- Premium powder coated finish of base frame & ball mount. Multi-ball 1-piece construction for max strength & durability. 2 hitch pin holes to adjust the length and there is plenty of room on the receiver shank to accommodate hitch mounted towing mud flaps or shocker bumper tow flaps.
- 12,000 lbs towing capacity and a 1,200 lbs tongue weight. Works great on pickup trucks, vans, suvs, cuvs and minivans for pulling campers & other trailers. Works with all Shocker hitch ball mount attachments drop, pintle, raised, drawbar, clevis (sold separately).
- Includes complete adjustable Shocker impact cushion hitch base frame assembly, combo dual ball mount with 2" & 2-5/16" hitch balls & 2 sway bar tabs & 2 ball mount pins. Made by Shocker Hitch USA.
Check StockUF Ultra-Fab Products 19-950001 Steel King Pin Tripod Stabilizer
- Rock solid, stabilizes even the heaviest trailer and Stabilizes front-to-back and side-to-side.
- Unique design brings the stabilizer to the king pin.
- 5" x 5.5" footpads to combat sinking and tilting.
- Adjustable hitch cup for fine tune adjustment with heavy duty steel construction.
- Weighs just 23 pounds, Adjustable from 37" to 50", Padlock included.NOTE : Customers that have a 5th Wheel Sliding Hitch must remove the contact plate on the hitch pin before using the tripod to stabilize the 5th Wheel RV.
- Now you can stabilize even the heaviest fifth wheel trailer for front-to-back and side-to-side motion.
- The Kingpin Tripod is easy to use and sets up in less than a minute.
- It features an adjustable threaded hitch cup for quick and effortless stabilizing adjustment.
- Plus, the tripod's base footpads are a full 5" X 5-1/2" to combat against sinking and tilting.
- Weighs just 23 pounds, adjustable form 42" to 50" and supports up to 5,000 pounds.
Check StockCURT 16085 Spyder 5th Wheel to Gooseneck Adapter Hitch, Fits Industry-Standard Rails, 25,000 lbs, 2-5/16-Inch Ball
- MAXIMUM FUNCTIONALITY. This unique gooseneck hitch is a 5th wheel to gooseneck adapter. It is designed to drop into existing 5th wheel base rails in your truck bed and enable gooseneck towing.
- 5TH WHEEL FIT. For versatile application, this gooseneck 5th wheel hitch fits any industry-standard 5th wheel rails. It provides a standard 2-5/16-inch gooseneck ball for ready coupling of a gooseneck trailer.
- DEPENDABLE TOWING. This 5th wheel gooseneck hitch is tested and rated to tow 25,000 lbs. gross trailer weight and 6,250 lbs. vertical load (limited to lowest-rated towing component).
- CORROSION-RESISTANT. For reliable weather resistance, this gooseneck hitch adapter is shielded in a highly durable carbide powder coat finish. This tough finish easily outlasts exposure to rain, snow, dirt and other corrosive elements.
- EASY TO INSTALL. This 5th wheel to gooseneck hitch adapter easily drops into the 5th wheel hitch rails and is secured with 4 included hitch pins.
Check StockCURT 16055 Bent Plate 5th Wheel to Gooseneck Adapter Hitch, Fits Industry-Standard Rails, 25,000 lbs, 2-5/16-Inch Ball
- MAXIMUM FUNCTIONALITY. This unique gooseneck hitch is a 5th wheel to gooseneck adapter. It is designed to drop into existing 5th wheel base rails in your truck bed and enable gooseneck towing.
- 5TH WHEEL FIT. For versatile application, this gooseneck 5th wheel hitch fits any industry-standard 5th wheel rails. It provides a standard 2-5/16-inch gooseneck ball for ready coupling of a gooseneck trailer.
- DEPENDABLE TOWING. This 5th wheel gooseneck hitch is tested and rated to tow 25,000 lbs. gross trailer weight and 6,250 lbs. vertical load (limited to lowest-rated towing component).
- CORROSION-RESISTANT. For reliable weather resistance, this gooseneck hitch adapter is shielded in a highly durable carbide powder coat finish. This tough finish easily outlasts exposure to rain, snow, dirt and other corrosive elements.
- EASY TO INSTALL. This 5th wheel to gooseneck hitch adapter easily drops into the 5th wheel hitch rails and is secured with 4 included hitch pins. It can be positioned over the truck axle or flipped and set for 3 inches of rearward displacement.
Check StockRVMATE 5th Wheel Lock, Heavy Duty Steel King Pin Lock with Anti-Theft Warning Tag, for 5th Wheel/Semi Trailers/RVs/Containers
- [Keep Your 5th Wheel Secure] : King pin lock can prevent thieves from connecting your fifth wheel kingpin and avoid unauthorized movement. The durable construction, eye-catching yellow lock and tag serve as a warning and deterrent against theft to keep your 5th wheel secure..
- [Dimension]: The dimension of the trailer king pin lock is 83 mm in height, with an internal diameter of 74mm, a universal fit for 50 mm diameter trailer pins. Thus, the lock can be widely applied in semi trailers, 5th wheels, trucks, boats, containers and many other scenarios..
- [High Quality Material]: Trailer king pin is made of heavy duty steel copper, processed with welding construction. The surface adopts electrostatic treatment, featuring the body with weather resistance and anti-rust, making it sturdy enough and hard to break even by experienced thieves. Therefore effectively increase the safety factor and reduce the probability of theft when installed onto trailer..
- [Warning Tag]: The main tone of bright yellow designed as a sign of strong visible warning. The chain with fluorescent warning tag hanging down passes on message to someone to try a....
Check StockRed Headed Rebel RHR 20K Ghost Raised Sway Control Cushion Hitch Ball Mount, Fits 2\ Hitch, Has 2-5/16\ Ball
- ...hock with double cushions for smooth shock absorbing towing 8" of Adjustment: 5" of rise to 3" of drop. (Drop & rise depend on ball mount chosen)..
- Built in Sway Bar Tabs: 2 built in sway control bar tabs for mounting the basic sway control arm bar(s) & mini balls (such as the curt 17200 friction sway control kit or Reese 83660 Sway Kit). Choose 2" or 2-5/16" hitch ball. Flip Around Design: 7 adjustment holes that can be flipped around more drop or rise. Most Versatile Hitch: Ideal for towing campers, boat trailers, fish houses, campers, enclosed trailers, race trailers, equipment trailers & snowmobile trailers..
- 20,000 lbs GTW: Up to 20,000 lbs towing capacity and a 2,000 lbs tongue weight. Premium Textured Black Finish: Impact resistant textured black powder coat finish of base frame. Length Adjustable: Receiver hitch shank has 2 hitch pin holes and this will work great with hitch mounted towing mud flaps..
- Complete System includes RHR 20K adjustable Ghost cushion hitch base frame with built in bump cushions, raised ball mount attachment selected & 2 ball mount pins with clips. Length Adjustable: Receiver hitch shank has 2 hitch pin holes and this will work great with hitch mounted towing mud flaps. Receiver Options: Comes with 2.
Check Stock