Top Refrigerant Tools

ZeroR® R12 to R134a Refrigerant Car Air Conditioner Adapter, Conversion Kit, High and Low Side Adapter Port Fittings (6 Items)

  • FITS: All R12 systems for all years, Low and High side service ports..
  • PIECES INCLUDED: One low-side 7/16 inch port, one high-side 3/8 inch port, one high-side for 2-Piece GM port, one high-side 7/16 inch port, retrofit conversion label, new service port caps.
  • RECHARGE: ZeroR has all the R-134a products you need from refrigerant, oil, stop leak and installation tools.
  • COMPATIBILITY: Will work with all R-134a refrigerant installation tools.
Check Stock

Digital Manifold Gauge Set HVAC Dual-Channel Temp Sensor HVAC Tools for 89 Kind of Refrigerant Digital AC Gauges Vacuum Pressure&Temp Test Digital HVAC Gauges with Hoses Digital Refrigeration Gauge

  • ...efrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c m....
Check Stock

Sub-Zero Synthetic Automotive Refrigerant R-134a (18 ounces)

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

Boltigen A/C R134A Refrigerator Freon Recharge Kit with Bullet Piercing Valves, Refrigerant Charging Hose with Gauge, Piercing and Self-Sealing R134a Can Tap Valve, Refrigerant Tank Adapters (Type 1)

  • ...th piercing and self sealing style which help to compatible with all R134a cans. They both are made of quality brass, which has good durability and anti-rust, T handle for easy fingertip control, thickening seals to prevent leaking..
  • 【R134a Recharge Hose】AC freon recharge kit with gauge for R134A R12 R22 or R502 refrigerant to vehicle or home air-conditioning, extra large and colored dials with fahrenheit scale is easy to read, gauge rated 350psi max pressure, hose rated 3000 psi burst pressure and 600 psi max working pressure..
  • 【Bullet Piercing Valve】BPV-31 bullet piercing tap valve in BPV-31 bullet piercing tap valve in car refrigerant charging ki, replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes. Bullet piercing tap valve is made of corrosion-resistant metal that won’ t wear out or rust over time..
  • 【Refrigerant Adapter】6014 vacuum pump adapter 1/4 Flare Female to 1/2 Male, 6015 R134A refrigerant tank adapter 1/2 Female to 1/4 Male Flare, R134A low side quick coupler, suitable for charging and service tools..
  • 【Package Included】With 1pc 55’’ r134a refrigerator freon recharge, 1pc R134A self sealing can tap, 1pc R134a non self sealing can tap....
Check Stock

Elitech Digital AC Gauge Set HVAC Gauges APP Monitoring with Temperature Clamps 1/8'' NPT, PT-500&PT-800

  • UPGRADED ELITECH TOOLS APP(ioS and Android): An intergraded app, that allows users to manage all Elitech tools such as vacuum pump, digital manifold, vacuum gauge, pressure gauge, refrigerant charging scale on one app, more efficient and more intelligent..
  • AUTOMATIC CALCULATION: Superheat/subcool calculations, recording, reporting, analyzing data, settable high/low pressure alarms, and data export in Excel or PDF format..
  • 140 REFRIGERANTS & 7 MEASUREMENT UNITS: Support the saturated temperature-pressure comparison table more of 140 kinds of refrigerants. The units can be selected among psi, inHg, kg/cm², cmHg, bar, kPa, and Mpa..
  • HIGHER PROTECTION LEVEL: The pressure gauge is made by ABS and PPT and the waterproof level is IP65. The package includes a portable case with a handle and two temperature clamps..
  • WIDE APPLICATION: This digital HVAC gauges electronic refrigerant group instrument, measuring temperature and pressure in real-time, is an auxiliary instrument for the installation, testing, and maintenance of refrigeration equipment such as air conditioners, fridges and co....
Check Stock

Robinair 16009 134R DiscovR Refrigerant Identifier

  • Best defense against unknown refrigerant and the risks associated with unknown refrigerant is a refrigerant identifier.
  • Contaminated refrigerant can wreak havoc on any R134a recovery recycle and recharge machine.
  • Protect your A/C service equipment and know whether or not you have acceptable R134a refrigerant before servicing the vehicle.
  • DiscovR refrigerant identifier notifies you when the system contains excessive air.
  • Pass and fail lights clearly show if refrigerant is pure enough to be recovered.
Check Stock

Honey Well Genuine 8oz R1234YF Refrigerant (3 Freon Cans) & HD Brass Can Tap with Gauge

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

Yellow Jacket 49017 Digital Refrigeration Gauge

  • ...sure and temperature test to help you determine refrigeration capacity of refrigeration system. The lower the pressure and temperature of the evaporation(Ev)/condensation(Co) are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do. It also could test the temperature of the refrigerant in the high/low-pressure pipes..
  • 【Superheat and Subcooling Test&Pressure Leak Test】When refrigerant type is set and temperature clamps are connected to air conditioning pipes, HVAC gauges automatically read the degree of Superheat(SH) and Subcooling(SC). The higher the degree of superheat, the smaller the opening of the expansion valve (the refrigerant filling is less) can be determined. Calculate the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking..
  • 【Vacuum Pumping & Refrigerant Filling & Built-in 89 kinds of Refrigerant Database HVAC Manifold】Digital manifold gauge set can connect refrigeration equipment and vacuum pump for vacuum pumping operation. Vacuum pumping can make it easier to fill the refrigerant into the pipeline. HVAC gauges is built-in 89 kinds of refrigerant pressure&temperature database. Before you fill refrigerant, you can set....
Check Stock

SURIEEN R134A A/C Charging Hose with Ball Valve, (4000~800) PSI Working Pressure 1/4' SAE x 1/4' SAE Thread 60' 3 Colors, Fits for HVAC Air Condition R410A R12 R22 R502 R404 Refrigerant Manifold

  • APPLICATION ----- Refrigerant charging hose with compact ball valve deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R134A, R22, R12, R502, R404. Standard 1/4” female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system..
  • HIGH WORKING PRESSURE ----- Working Pressure: 800 PSI.
  • Burst Pressure: 4000 PSI. Hose and ball valves with 1/4" SAE thread can be fitted most refrigerants. Note: R410 and R32 refrigerants with 1/4" SAE x 5/16" SAE, if you want to use it on R410 and R32 refrigerants please use a M-1/4" SAE x F-5/16" SAE Adapter..
  • EASY INSTALLATION ----- 3 colors 60” (5ft) hoses coded in red, blue and yellow, and all completed with compact ball valve and plastic handles on each hose. The coupler nuts are deeply knurled for quick finger-tightening..
  • PREMIUM QUALITY ----- Refrigerant 3-color charging hoses made of high-quality brass alloy and rubber, last long.
  • easy to operate and install, strong sealing for durability and safety. Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding..
  • 1 YEAR WARRANTY ----- 3 color refrigerant charging hoses have one-year warranty. true worry-free shopping experience. If this part ever fails please....
Check Stock

Aupoko R12 R22 to R134a Adapters, R134A Refrigerant Tank/Vacuum Pump Port Connection Adapters - 1/4" Flare Female x 1/2" Male - Refrigeration Handling Charging Tool

  • WIDE COMPATIBILITY ---- Usefully 1/4 female to 1/2 adapters for charging and service tools, such as vacuum pump, can tap or oil injector to adapt between R12, R22 system and R134a systems..
  • PREMIUM QUALITY ---- R134A brass refrigerant tank adapter to R12 fitting adapter is made of solid brass material to make sure construction builds, durable and long-lasting to use..
  • EASY TO INSTALL ---- This R12 R22 to R134A refrigerant tank adapter is quick and easy connection and disconnection, you can just hand tighten it and get a good seal, O-ring seal with no-leak connection, let you use it more safety..
  • ADAPTER SIZE ---- Vacuum pump adapter size 1/4 Male flare X 1/2 female and 1/2 male X 1/4 female flare..
  • 1 YEAR WARRANTY ---- Order these refrigerant tank adapter&vacuum pump adapter from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

R134a Refrigerant Recharge Hose Kit-A/C Freon Charging Hose Set, with BPV-31 Bullet Piercing Tap Valve, AC Retrofit Valve, R134a Self Sealing Adapter, for Home/Car A/C Refrigerant System

  • 【R134a Freon Recharge Kit】The ac refrigerant recharge hose kit includes: 1pcs R134a refrigerant charging hose with scale guage readings for R134/R12/R22 types freon, 1pcs RH thread R134a self sealing adapter, 1pcs ac retrofit valve, 1pcs bpv-31 bullet piercing tap valve.
  • 【RH R134a Self Sealing Adapter】The ac refrigerant charging hose can be achieved to connect self sealing refrigerant cans through this RH thread r134a self sealing can tap.
  • 【R134a Refrigerant Charge Hose with Guage】The ac freon charging hose equiped with the scale guage reading for r134/r12/r22 types freon, piercing r134a can tap to connect puncture r134a refrigerant cans male mouth, r134a service quick coupler port to connect car ac r134a service male port. Directly used for car r134a ac refrigerant system.
  • 【AC Retrofit Valve】The r134a refrigerant charge hose also can be used for home refrigerator ac refrigerant system through equiped with this ac retrofit valve. 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Widely Compitable】The r134A ac refrigerant charge hose kit can....
Check Stock

Boltigen R134A Can Tap, R134A Self-Sealing and Puncture Style Refrigerant Can Tap Valves with Refrigerant Tank Adapters for Refilling Automotive Air Conditioning Systems

  • You Will Receive: 1pc R134a self sealing can tap, 1pc R134a non self sealing can tap, 1 pc 6014 vacuum pump adapter 1/4 Flare Female to 1/2 Male, 1 pc 6015 R134A refrigerant tank adapter 1/2 Female to 1/4 Male Flare and 1 pc valve core remover, 5 pcs in total, valuable and practical kits of R134a can tap that meet your connectivity needs and provide convenience in your daily life..
  • R134A CAN TAP: the R134a can taps are made of quality brass material, which has good durability and anti-rust, can deal with most extreme conditions, T handle for easy fingertip control, thickening seals to prevent leaking..
  • REFRIGERANT ADAPTER: the vacuum pump adapter features quick and easy connection and disconnection with high flow, you can just hand tighten the vacuum pump adapter and get a good sealing, suitable for charging and service tools, such as vacuum pump, can tap or oil injector to adapt between R12, R22 system and R134a systems..
  • Wide Compatibility: Our R134a self sealing can tap valve refrigerant dispenser and non-self sealing can tap valve with 1/2 female thread to compatible with 1/4" SAE (R12 R22) female fitting AC charging hose, and it comes with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac....
Check Stock