Top Relay Type Avr - BuyWiseBest.com

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..

The Relay Board Maximum load: AC 250V/10A, DC 30V/10A.
Using SMD optocoupler isolation, strong driving capability, stable performance..
Can be set high or low level trigger with jumper cap, to meet the demand of more trigger applications..
Fault-tolerant design, even if the control line is broken, the relay will not move..
Wide Application,The relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..

【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).

★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
★Equipped with high-current relay, AC250V 10A.
★The control signal voltage range: the trigger signal is low 0-2V.
★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.

2pcs/lot 8 Channel relay module board, Working voltage: 5V.
This board is for Arduino PIC AVR DSP ARM.
Support all single-chip microcomputer control,Industrial circle,PLC controller,Household intelligent control.
Relay output maximum contact is AC250V 10A and DC30V 10A.
Widely used for all MCU control, industrial sector, PLC control, smart home control..

Indication LED's for Relay output status.
IN: can be high or low level control relay.
Equiped with high-current relay, AC250V 10A.
Standard interface that can be controlled directly by microcontroller (Compatible with , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

New RC-1167 Replaced Remote Control for Denon AVR-1913 RC-1167 AVR-2113CI AVR-E400 Home Theater AV Receiver System AVR-2113 AVR-2113CI AVR-1913 AVR-2313CI AVR-2313 AVR2113.
This RC-1167 Replaced Remote Control is compatible with Denon AVR-1913 RC-1167 AVR-2113CI AVR-E400 Home Theater AV Receiver System AVR-2113 AVR-2113CI AVR-1913 AVR-2313CI AVR-2313 AVR2113.
No need any program, only installing new alkaline battery can work well.
This remote have been tested before shipping out,accept to return or exchange.

It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient..
Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A.
RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move.
With optical coupling isolation, triggering more reliable, more stable..
EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper..

5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current.
Equiped with high-current relay, AC250V 10A.
Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Indication LED's for Relay output status.
Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch).

RC-1183 Replaced Remote, fit for Denon Home Theater AV Receiver: AVR-E400 AVR-X2000 AVR-1913 AVR-2113CI AVR-2113 RC-1167 AVR-2313CI AVR-2313.

Solid State Relay Module Board has been assembled, and electrical test passed.
Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
Load voltage range: 75 to 264VAC (50/60Hz).
Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

RC-1189 Replaced Remote, fit for Denon AV RECEIVER: AVR-S700W AVR-S710W AVR-S720W AVR-X1100W AVR-X1200W AVR-X1300W AVR-S700 AVR-S710 AVR-S720....