Top Reliable Thread Cutting

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Maxam 12-Piece Survival Knife Set with Zinc Alloy Handles, Ideal for Survivalists, Hunters, Hikers, and Outdoor Sports Enthusiasts

  • THE FINEST MILITARY SURVIVAL KNIFE SET: Maxam's 12-piece Survival Knife Set gives outdoor sportsmen, adventure enthusiasts, campers, hikers, hunters and survivalists the raw physical power to handle any cutting task imaginable!.
  • DYNAMIC CUTTING CAPABILITY: Measuring 14" in total length with a 7 3/4"-long 1/8"-thick blade, our primary hunting knife features a hollow zinc alloy survival-tool capsule handleand our second 7"-skeleton knife has a 1 1/2" blade with a gutting hook..
  • RUGGEDLY RELIABLE INNOVATION: This incredibly dependable Rambo knife also comes equipped with a sheath-attached slingshot with tubing and missile pouch, knife sharpener, compass, and a scabbard-sheath safety latch for reassuring security..
  • THE BEST WILDERNESS HUNTING KNIFE: Survival tool storage capsule includes a bandage, fire starter and matches, fishing line, weights and hooks, razor blade, tweezers, pencil, safety pin and a needle and thread to combat all outdoor challenges effectively..
  • 21ST CENTURY SURVIVAL GEAR & HUNTING EQUIPMENT: Maxam creates powerful military survival knives and innovative hunting gear that are affordable..
Check Stock

Rotary Cutter, 45mm Rotary Cutter for Fabric, Rotary Fabric Cutter with Safety Lock, Included Extra 10 Pack 45mm Replacement Blades, Ergonomic Rotary Cutter Tool for Quilting Sewing Arts Crafts

  • ♡ 45mm Rotary Cutter Blades: Blade is made from high quality SKS-7 steel.Blades are very sharp & durable.Suitable for cutting cutting all kinds of fabrics, paper, leather, scrapbooking, quilting and for all types of arts & crafts. It is more reliable than a pair of scissors, it can cut multiple layers of fabric or paper to the same size & shape at once, effortlessly without loose edges and threads. No strings are left behind, as it cuts clean and fast..
  • ♡ Cutting Mat: Durable double-sided self healing cutting mat, the self-healing property help the mat re-heal itself for every cutting, grid print on both sides. Made from durable 5-Ply materials for accurate cutting, stays flat and won't warp. Mat size: 9x12 inches (A4) which is perfect for small & medium craft & sewing projects. This cutting mat protect your tabletop & blades. The soft compound of the mat does not dull blades..
  • ♡ Great value cutting set: This rotary cutter set is perfect for cutting fabric, quilts, thread, paper and more. It's the ideal tool for quilting, sewing, scrapbooking, card making and oth....
Check Stock

FomaSP Carbide Threading Inserts for Steel and Stainless Steel 16IR 14UN / 16IR AG60 for Threading Cutting Tools Metal Cutting 10 PCS

  • Package include:2pcs Boring bar with wrench +5pcs 16ER+ 5pcs 16IR Inserts.
  • SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • SNL0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread left cutting.
  • Suitable for machining Stainless steel and Steel parts.
  • About the inserts:IR--Internal left hand inserts / ER- External right hand inserts.
Check Stock

Gingher Inc Classic 4 Embroidery Scissors

  • Ideal for cutting fabric, thread and needlework yarn.
  • Leather sheath protects blades when not in use.
Check Stock

Juki 1-Needle, 3-Thread Overlock Machine MO-623

  • No need to change needle plate to convert to rolled hem, its built in!.
  • Adjustable Stitch Length and Cutting Width.
Check Stock

2 Pieces Level 9 Cut Resistant Gloves Stainless Steel Cut Proof Gloves with 2 Pieces Nylon Gloves (Blue Edges)

  • Enough to Use: there are 2 sets of cut proof gloves in this package, each set contains 1 piece of cut resistant glove and 1 piece of black glove to wear inner, sufficient in quantity and reliable in quality, enough for you to use and replace in work or daily life.
  • Cut Proof and Serviceable to Use: the metal wire glove is made of stainless steel and cut proof HDPE thread, serviceable and dependable, not easy to break, wear or tear, coming from delicate workmanship, resistant to cutting, which can bring you a long term and satisfactory using experience.
  • Fit Well: these butcher gloves feature nice performance, feasible to keep you away from being cut by pointed blades, enhancing safety.
  • Besides, these cutting gloves come with soft nylon gloves for comfort wearing, and adjustable buckles on the wrist let you adjust according to your actual demands for a better fit.
  • Simple to Care: these cutting gloves for chefs are well made to use, not easy to rust and corrode, easy for you to clean with water, and they can even be applied in dishwashers, don't take up too much time, can be applied many times.
  • Where to Apply: these oyster shucking glove for kitchen have a wide range of applications, you can use them in the kitchen for chopping vegetables, slicing ....
Check Stock

Monopol Corkscrew And Wine Opener With Cork Remover Silver

  • Westmark Monopol "chianti" Bell corkscrew, made in Germany.
  • Use this elegant "chianti" Bell corkscrew for bottles with plastic or natural cork. It has the Original Monopol cutting thread. Its beautiful....
Check Stock

Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding

  • Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding.
  • Great for Different Gas: suitable for Oxygen-acetylene, propane, butane, natural gas and liquefied petroleum gas. Before the torch is ignited, the air-tightness of the air valves at the connection should be checked. the newly used cutting torch, the shooting and suction capacity should also be checked..
  • Cutting and Welding: Cutting range: 3-150mm / 0.12-5.90 inches, welding range: 9mm / 0.35 inches. Thread 7/8-20 at the nozzle, thread 9/16-18 at the gas port. Please see photo for more details..
  • No Gas Leakage: Conical step leakage proof interface is stable and firm, possesses good sealing, no falling off, no air leakage, durable and safe to use. When the cutting torch is ignited, the acetylene valve should be opened first, and then the oxygen valve should be opened, and the mouth should not point to people or animals..
  • Multi-purpose: Widely used in workshops, metal cutting and welding, mechanical maintenance, and more. If you have any questions or concerns, please be sure to send us a message, thank you!.
Check Stock

PTSTEL 39 PCS Tap and Die Set Metric & SAE Essential Threading Tool Kit for Cutting External and Internal Threads with Adjustable Handles Accessories and Case

  • High-quality & Durability: PTSTEL metric & SAE tap and die set is made of industrial grade GCR15 bearing steel, which is non-corrosive and durable,....
  • Efficient Cutting: All cutting teeth of the tap and die set are precisely CNC machined and accurately heat treated to a rockwell hardness 60 HRC to....
  • Wide Range of Applications: The cutting thread tool set is processed with internal thread and external thread, and strong torsional force is ideal for....
  • Easy to Storage: Each taps and dies set is equipped with plastic tool box with corresponding scales engraved. You will never get the wrong size when....
  • Most Complete Size: 17pcs metric & SAE tap and die set: SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27), #4-40, #6-32, #8-32, 1/4-20 METRIC:....
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

ChgImposs Imperial Screw Pitch Gauge, 55 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 4-48 Blades Range

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 19, 20, 22, 24, 28, 40, 48.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 20pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock