Top Remote Outlet For Dust Collector

Taytools 114971 4 Inch Dust Collection Cyclone Separator Kit for Trash Cans Barrels or Custom Built Containers

  • Convert dust collector to two-stage unit with this dust separator kit.
  • Inlet and outlet ports accept a 4” dust collector hose.
  • Kit contains two elbows, two couplers, two hose clamps and all needed hardware.
  • Prevents debris from reaching the impeller and clogging the filter.
  • Perfect for use with Table, Saws, Jointers, Planers, Router Tables and much more.
Check Stock

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock

POWERTEC 70275 3-Way Dust Collection Fitting w/Y Shaped Design for 4 in Hose & Cuff

  • INCLUDES: (1) 3-Way Junction Dust Collection Fitting.
  • FUNCTION: Allows you to connect up to three individual dust collection tools or machines to one portable dust collector without having an expensive piping system set-up.
  • COMPATIBLE: This 3 way splitter features a y-shaped design with 4” nominal, actual 3-29/32”OD inlet and outlet ports (accepts most 4” ID dust collection hoses and flexible tubing). Please note that a blast gate and/ or hose clamp may be required for direct machine connection (not included).
  • VERSATILE: Works well with most dust collection tools and accessories, including band saws, belt sanders, table saws, jointers, planers and more.
  • QUALITY: This dust collector adapter is made with super durable ABS plastic, known for it’s resistance to scratches, high impact and heat.
Check Stock

HBN Smart Plug 15A, WiFi&Bluetooth Outlet Extender Dual Socket Plugs Works with Alexa, Google Home Assistant, Remote Control with Timer Function, No Hub Required, ETL Certified, 2.4G WiFi Only, 2-Pack

  • [GREAT FOR LIGHTING] Remotely turn your indoor and outdoor lighting ON/OFF.
  • [CONVENIENT] Conveniently turn your outside lights on from indoors or turn on hard to reach switches with the click of a remote. The WavePoint remote control outlet comes with pair and un-pair technology. It will give you the freedom to choose or change the control setup any time you like..
  • [WEATHER RESISTANT] Durable, weather resistant construction for outdoor use.
  • [MULTIPLE USES] TVs, lighting, heaters, sprinkler systems, terrariums, aquariums, humidifiers, shop vac power tool, dust collector.
  • [LIMITED LIFETIME WARRANTY] Includes a Limited Lifetime Warranty.
Check Stock

Makartt Rechargeable UV LED Light Cordless Nail Lamp Aurora 54W Professional Nail Dryer Bundle with Rechargeable Nail Dust Collector with Reusable Filter Electric Sylvie Nail Vacuum Extractor

  • Smart Infrared Sensor Design: This intelligent uv lamp for gel nails is designed with smart infrared sensor. Hand in, light on.
  • Easy to use. Perfect gift for mom, daughter, girl friend, wife, sister in specail days, such as Birthday, Christmas, and Wedding Anniversary..
  • Rechargeable Nail Dust Collector: The cordless nail dust cleaner, equipped with a 2000MAH lithium battery, can operate up to 2.5 hours after full charge in 100-240V, making it more convenient to DIY your nails in the clean vacuum..
  • Professional Dust Collector Powerful Suction: The dust collector comes with powerful vacuum engine to suck and absorb all the dust when you are refilling or removing gel nail polish with the nail drill machine from 360 degrees efficiently, and therefore it leaves a dust-free and clean environment when you DIY your nails..
Check Stock

Makartt Nail Dust Collector 60W Extractor Vacuum Dust Collector for Nails Acrylic Nail Drill Dust Extractor Nail Salon Equipment with 2 Powerful Nail Fan MK200

  • 2 Strong Dust Fans Collector: Compared with other nail vacuum, Makartt nail dust collector is equipped with 2 strong powerful vacuum dust suction fan motors, with high efficiency in dust cleaning, providing a comfortable filling process for you..
  • Adjustable Suction Nail Vacuum Dust Collector: This nail dust collector machine with the adjustable suction switch, it’s convenient to adjust nail fan suction according to your need. Note: When we use higher suction, the motor in the dust collector will run faster, causing it to make a louder sound..
  • Dust Collector for Nails Salon or Personal Use: The nail dust collector machine can be used to clean nail dust produced by removing gel nail polish, poly nail gel, dipping powder, acrylic nails, nail extension, gel nails, crystal nails, etc. Perfect for personal use or nail salon. Absorb dust from various nail care processes, such as a nail file, nail manicure, nail drill machine etc.
  • Durable Nail Fan Dust Collector: Large cooling holes design on the back, high-speed rotation, continuous heat dissipation, to ensure that the nail dust collector for acrylic nails does not generate heat when working, and prolong the service life. The dust collector for nails is made of high-quality stainless steel, durable to clean ....
Check Stock

3M FAPF02-4 Filtrete Ultra Clean Air Purifier Replacement Filter

  • 【More effectively Dust Collector】Specifically reducing the small airborne particles through the use of an air filtration system and essential in any workspace or shared area. This air filtration can be set to operate at 3-stage speeds, 650/850/1100 CFM (HI), they will create a circular airflow and work more efficiently which say goodbye to the film of fine dust all over everything, woodturning, sanding, sawing, debris and air quality definitely improved..
  • 【2-Stage Filtration System】This hanging air filter is equipped with 2 filters, both of which can be easily replaced and reusable, no tools required. An outer filter removes larger particles while the inner filter traps smaller particles, ideal for wood carving, sanding, turning, scroll saw work, rotary tools, powder mixing, and more. Hanging air filters are an important part of your shop's overall dust collection setup..
  • 【Set it and Forget it】Built-in timer settings for 1H to 6H will shut off automatically at the end of the designated time, cleaning the air in your workshop even while you're away. For example, you can leave the shop knowing it’ ll shut off in the set time..
  • 【Humanization design, portability】This dust collector can be easily fitted on a benchtop or other work surf....
Check Stock

Abestorm 2-Stage Filtration Air Filtration System for Woodworking, Hanging Air Filtration Dust Collection for Woodworking/Garage/Workshop, DecDust 500 (350/450/500 CFM)

  • ...tting from up to 26 feet away, easily switch between various airflow speeds of 350CFM, 450CFM, 500 CFM depending on what the situation calls for. Item Size: 20.7 x 17 x 11 in. Weight: 25.5lb..
  • ✔ [Two Filtration Devices, Easily Replaced Filters] - The air filter dust collector with primary filter captures 98% of 5-micron particles, inner efficiency filter bag captures 87% of 1-micron particles, effectively enhance the effect of air purification and deal with partides, dust, sawdust, pet sawdust, and so on. An ingenious buckle structure is designed on both sides of the filter, which is convenient for users to change the filter. .
  • ✔ [Timer Setting, Ideal for Woodworking Air Purification] - This air filtration dust collection for woodworking has remote built-in timer with 1H/2H/3H/4H/5H/6H settings, shut off automatically at the end of the designated time, cleaning the air even while you are away from your woodwork shop. Overload protector built-in also make it automatically shut off, safe to use..
  • ✔ [Hanging Air Filter for Workshop, Easy to Install and Use] - Plug and play, this compact air filtration system can be....
Check Stock

Rockler 5 Micron Dust Collector Bags - Replacement Dust Bag for Wall Mount Dust Collector – Heavy-Duty Cloth Replacement Bag – Easy to Attach Dust Collection Bag - Dust Collector Accessories

  • 5 Micron Bags For Wall Mount Dust Collector: This 5-micron replacement dust collection bag offers the same size and capacity as the Dust Right Wall Mount Dust Collector's original 30-micron bag, but with much finer particle retention..
  • Specs: Serves as a replacement bag for the Dust Right dust collector system. This dust collector filter bag only works with the Dust Right 650 CFM wall mount-dust collector (sold separately)..
  • High-Quality: This dust collection system replacement bag is made from heavy-duty cloth that’s able to withstand everyday wear and tear applications. These Dust Right dust collector bags are made with heavy-duty cloth and attached easily..
  • Great For Planer: A great dust collector filter bag that works wonderfully on DeWalt planer. This portable dust collector bag captures the dust and chips and doesn't need any adapters or fancy collection containers or hoses..
  • Compatibility: This rockler dust collection bag is designed to work as a top dust filter bag for most popular power tool dust collection systems such as delta, grizzly, shop fox, and more..
Check Stock

Makita 5057KB 7-1/4" Circular Saw, with Dust Collector

  • Powerful 13 AMP motor delivers the power to cut five stacked 5/16" siding boards in a single pass.
  • Dust collector engineered to reduce the amount of dust created while cutting.
  • Easy open dust collector for convenient disposal.
  • port for attaching to optional dust extractor.
  • Makita 5057KB 7-1/4" Circular Saw, with Dust Collector.
Check Stock

POWERTEC 70122 Big Gulp Dust Hood for Woodworking Dust Collection Dust Hood

  • INCLUDES: (1) Plastic Dust Hood featuring a Big Gulp 13” x 16” opening.
  • APPLICATIONS: This catch all attachment collects a wide range of saw dust, debris and woodchips for an assortment of machines, including belt sanders, miter saws, table saws, lathes, drill press and planers without hoods.
  • BUILD: Made with premium ABS plastic, this dust collector accessory is lightweight yet durable, anti-corrosive for in and outdoor usage, and offers high impact resistance for day-to-day wear & tear.
  • COMPATIBILITY: 4-inch OD port accommodates and connects to any 4” ID dust collection system hose or pipe.
  • VERSATILE: Completely portable and can be placed behind or underneath your machine, on a workshop table close to the source, or wherever dust is being produced.
  • 4-Inch nominal end measures 3-31/32-Inch O.D. and 3-47/64-Inch I.D..
Check Stock

POWERTEC 70103 21-Inch Floor Sweep Dust Collector – Floor Mounted Blast Gate Attachment

  • INCLUDES: (1) Dust Collection Floor Sweep.
  • FUNCTION: Part of our shop dust collection fittings series, this sweeper is an excellent add-on accessory to help gather workshop sawdust and clean up floor messes.
  • COMPATIBILITY: Works in conjunction with 4 inch blast gates for dust collector systems (please note: This floor sweep will not connect directly to a blast gate. A flex cuff or union is required)– This stationary mounted floor cleaning tool attaches easily to the floor with double-sided tape.
  • PREMIUM BUILD: Made with impact resistant, heavy duty ABS plastic material ideal for the wear & tear commonly associated with collecting workshop saw dust, wood fiber and other abrasives.
  • DIMENSIONS: Overall size: 24-Inch width by 3 1/2-Inch height by 7-Inch | Flange is 3/4-Inch wide | Thickness: 3/32-Inch | Outlet diameter: 4-Inch OD | Weight: 6. 2 oz.
Check Stock