Top Replacement Caps

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

25 Pcs Gas Can Spout Kit QJIUBA 4 Sets for 1/2/5/10 Gal Replacement of Old Tanks Includes Nozzle, Vent caps, Rubber Gasket, Drill bits, Auxiliary Base Cap

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 3 spout kits , 3 spout sealing caps, 3 coarse threaded bases, 3 fine threaded bases, 1 gas can drill , 6 replacement vent caps..
  • The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just needa simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
  • QJIUBA Gas Can Spout helps get rid of inconveniences while travelling. The universal Gas Can Spout is aim to help others while driving.
Check Stock

Werner 36-6 Hardware Package for AC96 standoff

  • Replacement Hardware for the AC96 Standoff Stabilizer.
  • Consists of 2 u-bolts with 4 wing nuts and 2 backup plates.
  • and 2 replacement tubing caps and 2 molded rubber caps.
Check Stock

Moroso 97340 Valve Cover Breather Grommets, Pair

  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1.220" diameter hole.
  • Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1. 220" diameter hole Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
Check Stock

Door Mirror Covers Carbon Fiber Side Mirror Cover Caps Rearview Replacement for BMW F20 F22 F23 F30 F31 F32 F33 F36 F87 M2 X1 E84

  • ✔️【Fitments】: Replacement for BMW 320i 328i 330i 335i 420i 428i 435i F20 F22 F23 F30 F31 F32 F33 F36 F87 M2 X1 E84 Replace rear view mirror cover caps.
  • ✔️【Durable and Protect 】: Side mirror cover Replacement for bmw f20 Ensure maximum strength and durability for long lasting usage. Such a practical tool you will need it. Effectively protect your rearview mirror from damage..
  • ✔️【Enhance Car’s Appearance】: Mirror caps replacement for bmw f30 Made Of ABS Material with Carbon Fiber( not the real carbon fiber) Finish surface texture protective films and high end luxury looking. Enhance visual impact, create an new iconic look and set your car apart from similar models on street.
  • ✔️【Best Replacement】: This Rearview mirror caps replacement for BMW F20 F21 116i 118i 120i 125i 130i replacements Perfect for your old or damaged mirror cover, with Carbon Fiber Finish surface texture protective films mirror caps.
  • ✔️【Easy Installation】: Great fitment & easy installation , firmly, not easy to fall off. (no modification required), Please confirm the product if it matches your car before you purchase.
Check Stock

American Maid Replacement Bottle Caps size 53 mm for 3 or 5 gallon jugs

  • 【Fitment Size】This Water Jug Cap Replacement Non Spill Bottle Caps only fit 5.5cm/2.17 inches diameter with screw top bottle for Water Cooler & dispenser..
  • 【Crystal-clear Water Storage】Upgrade Non-Spill Plug system, no splash, no leak, sealing strong than general caps, clean and safe to create a sterile environment for crystal-clear water storage.
  • 【Easy to Screw on】Simple and modern design, easy to screw on.A good replacement of the damaged or lost , keep your water clean while stored.
  • 【Superior Quality food grade plastic material】The Water Jug is made of food grade plastic material, this is safe, harmless and reusable.
  • 【Money Saving】Refill your water jug for recycling use and saving money,No need the disposable water caps.
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

Replacement American Large Table Shuffleboard Puck Weight Top Caps-- Set of 8 caps - Red/Blue - Caps/Tops Only

  • TABLE SHUFFLEBOARD PUCK CAP TOP - FITS PUCKS MEASURE AT DIAMETER 2 5/16(Measured at Center) with cap measured 2 1/8.
  • THESE CAPS FIT LARGE AMERICAN OR ZIEGLERWORLD PUCKS with screw on caps. WILL NOT fit snap on cap pucks or other Brands.
  • 8 Cap Tops are in this package - 4 Blue & 4 Red ---- REPLACEMENT CAPS ONLY NO WEIGHTS ARE INVOLVED.
  • FOR MEDIUM SIZE CAPS ( 2 1/8 at center of puck and 1 7/8 cap) SEE OUR OTHER LISTINGS.
  • For Additional color options see the ZieglerWorld caps available in 21 colors.
Check Stock

Werner AC36-2 Replacement Rubber Tips - End Caps for Extension Ladder Standoff/Stabilizer

  • Fits Werner Model Standoff / Stabilizer: AC78 & AC76.
  • Includes: (2) Molded Caps, (2) Tubing Caps & Instructions.
Check Stock

Wheaton 240804 Polypropylene 22-400 Screw Cap with Metal Foil Liner (Case of 1000)

  • Screw caps for Wheaton Liquid Scintillation Vials.
  • Use as replacement caps or for vials that are not provided with caps.
  • Case of 1000 provides an economical alterative.
  • Select cap and liner material for your application.
Check Stock

80 Pieces Christmas Silver Ornament Caps 3/4 inches for Glass, Porcelain, Ceramic Christmas Ornaments DIY Decorations

  • Package: 80 round Christmas ornament caps, enough for your use and replacement, to meet your different decoration needs.
  • Quality Materials: These ornament caps are made of quality materials, size is 0.75 inches, sturdy, reliable, which can be applied for a long time, bringing you a smooth and comfortable using experience.
  • Unique: The Christmas hangers cap is equipped with the spring wire hanger which fixes it firmly, you can use the Christmas hangers cap reliably, easy and convenient to operate for you.
  • Uses: These ornament replacement caps are suitable for matching with glass,plastic, porcelain ornaments, ideal supplies for your Christmas.
  • 100% Satisfied: If you have any other questions about the clear glass ornament silver cap, please feel free to contact us.
Check Stock

Zieglerworld Replacement American Medium Table Shuffleboard Top Caps - 4 Pack - Available in 21 Colors (Black)

  • TABLE SHUFFLEBOARD PUCK CAP TOP - FITS PUCKS MEASURE AT DIAMETER 2 1/8(Measured at Center) with cap measured 1 7/8.
  • THESE CAPS FIT MEDIUM AMERICAN OR ZIEGLERWORLD PUCKS with screw on caps. WILL NOT fit snap on cap pucks or other Brands.
  • FOR LARGE SIZE CAPS ( 2 5/16 at center of puck and 2 1/8 cap) SEE OUR OTHER LISTINGS.
  • REPLACEMENT CAPS ONLY NO WEIGHTS ARE INVOLVED.
Check Stock