Top Replacement Spigot For Beverage Jars
BTSKY™Stainless Steel Beverage Dispenser Replacement Spigot Fits 16mm（5/8 inch）Opening - No Lead Dispenser Replacement Faucet, Polished Finish
- Multifunction Replacement Spigot: stainless steel spigot for beverage dispenser, juice jar or wine barrel or or any other beverages. A great addition to outdoor parties, receptions, hotel dining rooms,or any other events.
- Quick Installation: this replacement spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
- Premium Quality : This Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable, good for health and with a long life with proper appliance.
- Notice: Please wash it before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten.
- Do not over-tighten, clean thoroughly after each use, keep in open position for storage.
- Excellent Flow with No Leaks: This stainless steel spigot will not only look nicer but will dispense any juice or drinks efficiently, unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, this spigot has an excellent continuous flow.
Check Stock
[Updated] More Durable Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and other Gravity Filter systems as well
- Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
- Multi-Function – The DozyAnt Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light..
- Premium Quality –The DozyAnt Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
- Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
- Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our DozyAnt Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willin....
Check Stock
WodsWod Beverage Dispenser Replacement Spigot Fits 16mm（5/8 inch）Opening, Stainless Steel Polished Finished, Water Dispenser Replacement Faucet, fits Berkey and other Gravity Filter systems
- Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
- Multi-Function – The WodsWod Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage. Fits all Berkey Stainless Steel models. Will not fit Berkey Light..
- Premium Quality –The WodsWod Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
- Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
- Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our WodsWod Beverage Dispenser Replace Spigot, just contact us, we will settle the issue according to your willin....
Check StockBeverage Dispenser Replacement Spigot,Stainless Steel Spigot for Water Dispenser,Drink Dispenser Replacement Faucet
- Durable: The spigot is made of high-quality stainless steel, lead-free food grade, and corrosion resistant..
- Fits Most Dispensers: This beverage dispenser replacement spigot will fit 16mm or 5/8" openings and dispenser wall thicknesses of 17mm or 11/16"..
- Widely used: Beverage dispenser replaces spigot for dispensing lemonade, kombucha, wine, sun tea, juice..
- Satisfactory choice: stainless steel spigot is a good choice to replace the plastic spigot that comes with the dispenser.
- Good after-sale service: If you have any questions about the product, please contact us, we will reply within 24 hours.
Check Stock
OFNMY 2 Pack Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished, Water Dispenser Replacement Faucet for Beverage Dispenser or Glass Jar
- ????Fits Dispenser Wall Up to 11/16 inch or 17mm Thick – This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install, total size: 97mm x 61mm or 3.81 inch x 2.39 inch..
- ????Fits All Berkey Stainless Steel Models, NOT Berkey Light – The Beverage Dispenser Replacement Faucet is made of food-grade SUS304 stainless steel, No Lead, Acid Resistant, great for dispensing tea, beverage, vinegar or wine. and works for most self-serve, traditional beverage service and parties..
- ????Fast & Steady Flow Rate – Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation..
- ????Notice – Wash and tear off the white protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
- ????How to use? – Step1: Hold a faucet, place a stainless gasket and then a silicone gasket into it.
- Step2: Thread faucet through your beverage dispenser, and then a silicone gasket, a washer and a nut.
Check Stock
hgzaccompany Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.
- Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
- Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
- Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
hgzaccompany 2 Pack Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.
- Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
- Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
- Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
Stainless Steel Beer Beverage Dispenser Replacement Spigot Faucet Black Handle for Coffee Jar Juice Cold Hot Water Wine Beer Drink barrel Milk tea bucket by MUGLIO(16mm)
- The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
- This Beverage Dispenser Replacement Spigot Has Quarter-Turn Ceramic Valve. It requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Notice - Wash and tear off the blue protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
Glass Drink Dispenser for Parties - Set of 2-1 Gallon Glass Jar Beverage Dispensers with Stand Glass Water Dispenser Countertop for Weddings Sun Tea Jar Lemonade & Laundry Detergent Dispenser
- Mason Jar Drink Dispenser - The Estilo set of 2 glass mason jar beverage dispensers comes with a decorative metal stand, embossed chalkboards and chalk included. The dispensers have a wide-mouth design with a tin screw off lid that makes it easy to clean, use and fill with your favorite beverage..
- High-Quality and Strong Glass Beverage Dispenser - Our glass dispenser is made of thick high-quality, premium-grade glass with a non-drip, easy pull spigot. The liquid dispenser’s spigot is created to provide a steady stream of your favorite drink..
- Great for Parties or Everyday Use - These drink dispensers make a great centerpiece for parties, holidays, barbecues, picnics, bachelor and bachelorette parties, weddings and more. It’s also a great liquid laundry detergent dispenser..
- Great Size - Each liquid dispenser holds up to 1 gallon (3.78 liters), so that you can fill with your favorite beverages, iced tea, lemonade, and more. The glass beverage dispenser is not recommended for hot liquids..
- What’s Included - 2 Glass Mason Jars Beverage Drink Dispensers 1 Gallon each, 2 Chalkboard Labels, 2 pieces of Chalk, Metal Stand, and Non-Drip Spigots. Dispenser dimensions.
- 5 L x 5 W x 10 H inches. Hand wash only..
Check Stock
Insulated Beverage Dispenser, Drink Dispenser
- 【MATERIAL】Our hot insulated beverage dispenser with spigot is made of high-quality double-layer stainless steel liner, safe and hygienic, combined with polyurethane foam material to make the heat preservation performance better. Reserved for the original flavor and nutrients of the beverage..
- 【FUNCTION-KEEP HOT AND COLD BEVERAGES】 This beverage dispenser does not have a heating function but keeps hot and cold beverages for hours.Our drink dispenser with spigot is perfect for serving coffee, tea, hot cider, hot chocolate and more for banquets, church functions, corporate events and christmas party..
- 【FOLDABLE LEGS DESIGN 】Our insulated beverage dispenser is especially designed as foldable legs ,which is convenient for you use flexibly. If you have any other questions about our hot and cold insulated beverage dispenser with spigot , please contact us and we will reply you as soon as possible..
- 【CONVENIENT】The hot and cold drink dispenser with stainless steel outer and inner body, and the insulated beverage dispenser with spigot is convenient to carry. In addition, hot and cold beverage dispenser with heavy-duty handle enables it to be easily moved from one location to another..
- 【LARGE CAPACITY & INTELLIGENT DESIGN】Our insulated bev....
Check Stock
Outdoor Glass Beverage Dispenser with Stainless Steel Spigot & Ice Cylinder - 1 Gallon Drink Dispenser for Tea, Lemonade, Cold Water & More
- EASY TO USE – Fill and clean this 1-gallon glass beverage dispenser using the wide mouth opening. Not recommended for use with hot beverages, this dispenser is perfect for lemonade, tea, sangria, ice water, and more! Hand wash only..
- ADD CHIC STYLE TO YOUR EVENT – Wedding, showers, dinner parties, birthdays, whatever your even might be this outdoor beverage dispenser will add a vintage charm to any setting that will definitely leave your guests talking..
- STAINLESS STEEL SPIGOT – Each glass drink dispenser has a metal spigot that prevents rust, breakage and leaking. Our spigot is food grade 304 Stainless Steel, resistant to corrosion..
- LIFETIME REPLACEMENT WARRANTY – Crutello stands behind all of its beverage dispensers 100%. This water dispenser comes with an automatic 1 year warranty. Register online for a free lifetime warranty..
- MINI CHALKBOARD INCLUDED – Easily mark what is inside each drink dispenser to your guests with the included chalkboard and chalk.
Check StockiCakper Durable Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished Water Dispenser Replacement Faucet，fits Berkey and other Gravity Filter systems as well
- Easy and Quick Installation: Please clean the faucet before use. ①Put the silicone pad into the faucet. ②Insert the faucet into the dispenser.....
- Wide Uses: The beverage dispenser replacement spigot fits most dispenser, which is great for dispensing lemonade, sun tea, wine, juice or water at....
- Durable and Corrosive-Resistant: Compared with the plastic faucet, the stainless steel polished faucet is not only stylish and beautiful, but also....
- Quality Stainless Steel, Excellent Flow: The exquisite workmanship ensures its good fluidity, and you don't have to worry about splashing the beverage....
- Your Satisfaction is Our Priority: All our beverage dispenser replacement spigot are made of quality stainless steel material, 100% satisfaction....
Check Stock
