Top Resin For Concrete Bonding

10 oz. Dewalt AC100+ Gold Quik-Shot Acrylic Epoxy Adhesive (Case of 12)

  • ICC-ES ESR 2582 - Category 1, Cracked and Uncracked Concrete.
  • Bonding threaded rod and reinforcing bar into hardened concrete and masonry.
  • Can be installed in a wide range of base material temperatures.
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi).
Check Stock

SAKRETE | Flo-Coat Concrete Resurfacer | 20 lb

  • Highly flowable material for resurfacing large areas of concrete.
  • Easy to apply with a lightweight squeegee.
  • Polymer modified for superior bonding strength.
Check Stock

LET S RESIN UV Resin Kit with Light Bonding&Curing in Seconds 25g UV Resin Kit with UV Flashlight for Welding Jewelry UV Glue Adhesive for Plastic Repair Glass Light Craft Decor

  • Bonded UV Resin Kit Cured in 5-10 Seconds: LET'S RESIN UV resin for bonding has low viscosity(refer to fluency), strong adhesive, UV curable, odorless&high transparency after curing. Compared with other UV resin, it cures rapidly under the irradiation of a UV flashlight..
  • Perfect Art Adhesive: Compared with traditional glue, LET'S RESIN bonding UV resin kit keeps liquid state before curing with UV flashlight, which is convenient for you to modify and shape. Provide more perfect glue for your artistic creation..
  • Strong UV Resin Adhesive Tool: It can bond small ornaments with transparent objects such as resin, glass, acrylic, etc., and can also be used for welding between glass, metal and plastic. It is recommended that at least one of the two objects should be transparent for better curing..
  • Easy to Use & Carry: Properly install the battery of the UV flashlight, and fix the object while the UV flashlight for irradiation and curing. UV flashlight has high energy and is easy to carry..
  • Why Choose Us: With years of experience in epoxy resin, LET'S RESIN is committed to providing craft enthusiasts with tools and materials to turn imagination into reality. Strictly control product quality and attach great importance to the consumer experience. UV cure ....
Check Stock

TF Structural Concrete Repair

  • Excellent and versatile concrete repair mortar, for most types of concrete damage..
  • Apply it as thick or as thin as needed, with no critical mix ratios.
  • Can be applied in multiple layers, with superior bonding.
  • Video shows the application of about three kits. https://youtu.be/oPspphx1rG4.
Check Stock

Pemberly Row 23.5\ Modern Concrete Stone Pillar Table Lamp in Gray

  • Material: Concrete, Metal and made of 100% linen with polystyrene lining.
  • The shade is in a crisp chiffon color and is made of 100% linen with polystyrene lining for durability.
  • Premium materials have been used in the making of this product.
Check Stock

Armor AR350 Wet Look Concrete Sealer and Paver Sealer with Low Gloss Finish 1 GAL

  • Penetrating high solids acrylic coating with unmatched bonding characteristics..
  • Durable, long lasting, professional grade solvent based acrylic offering superior performance abilities..
  • Satin sheen wet look finsih. Will bring out color in dulled substrates..
  • Can be used on poured concrete, stamped concrete, concrete pavers..
  • 1 gallon will cover up to 100 square feet in two coats..
Check Stock

Metal bonding Repair Paste, Super Glue Gel Paste(A+B), Filler, Adhesive for Cast Iron, Radiator Cold Weld high Heat Resistant Glue, Industrial (80 Gram), (PASAWA 1001)

  • ... strong and stable permanent bond. Compared with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness..
  • Wide Application: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair..
  • Safe and Clean: Our epoxy resin is a clean, odorless, and environmentally friendly product, 100% safe. We insist on the production of exclusive metal glue formula, which has passed MSDS, SGS, and various safety reports. We take environmental protection as the concept, to ensure that your repaired products are safe and clean..
  • Simple to Use: The way to use super glue is very simple. First, please make the surface clean before the process. Then, use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing..
  • 100% Refund Guarantee: We are very confident in the quality of our plastic glue.....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...2 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock

Custom Shop - Black Epoxy Primer/Sealer 2.1 VOC (1/2 Gallon Kit) Anti-Corrosive DTM High-Performance Primer for Automotive and Industrial use Kit = 1 Qt. Epoxy Primer +1 Qt. Epoxy HDR.(1-1 Mix)

  • HIGH-PERFORMANCE BONDING AGENT - Liquid Rubber Multi-Purpose Primer improves adhesion to a variety of substrates, especially to wood and concrete.
  • USE ON - Numerous surfaces including concrete, wood, high-density polyethylene, and more! Our Multi-Purpose Primer is freeze/thaw stable as well as fast drying.
  • EASY TO APPLY - Apply using a conventional brush or roller equipment.
  • may also be sprayed using a delivery system and nozzles appropriate for this material. Apply 1-2 coats depending on the surface and apply top coat within 24 hours when tack free.
  • ENVIRONMENTALLY FRIENDLY - Liquid Rubber Multi-Purpose Primer is water based and non-toxic, containing no solvents and low VOC's. Safe for humans and pets alike.
  • APPLICATION - For best results, apply to a dry surface that is free of dirt, debris, oil, and grease. Do not apply before the onset of rain or if dew is forecast.
Check Stock

5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer

  • Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics..
  • Durable, long lasting. Stands up to abrasion, UV rays, hot tire pick up, hot and cold temperatures..
  • Long lasting high gloss finish provides up to 2-5 years of life on a two coat application before the need for a recoat. Will bring out color in dull and faded surfaces..
  • Can be used on poured concrete, stamped concrete, concrete pavers, aggregate, and more..
  • Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic..
Check Stock

Epoxy Glue Adhesive C-Tough by CECCORP (2 Gallons Combined) – Epoxy Glue for Metals, Aluminum, Fiberglass, Masonry, Wood, Stones, Concrete and Some Plastics – Waterproof – Shock Resistant Till -45°C

  • ★ Easy To Use: Volume Ratio of 1:1, Long Working Time (30-35 Minutes). Full Cure After 24 Hours, High Strength Bonding of Dissimilar Materials such as Metal (Aluminum, and Stainless Steel), Ceramic, Wood, Concrete, Fiberglass, Stone, Glass, Some Plastics, Carbon Fiber, and Many Others..
  • ★ Common Uses: Knife Handle, Boat Patching, Aluminum, Fiberglass and Carbon Fiber Bonding, Golf Reshafting, Wooden Boat Manufacturing, Concrete, and Canoe Repairs, RC and Aircraft Modelling..
  • ★ Permanent Waterproof, Non-Brittle, Shock Resistant down to -45°, Mixes Easily with Pigments, Microbubbles and Fillers..
  • ★ Industry Uses: Automotive, Marine, Construction, Electronic, Composite..
Check Stock