Top Retrofit Bracket

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72629 LED Recessed Lighting Retrofit Kit 8\ 35W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72631 LED Recessed Lighting Retrofit Kit 8\ 35W 5000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

Morris Products 72656 LED 4\ Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K, 1-Pack

  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K provide an energy efficient alternative to Incandescent lighting..
  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K features include:.
  • Can be installed in most 4" downlight cans.
Check Stock

Aero Pure ABF110 L5 W ABF110L5 Ceiling Mount 110 CFM w/LED Light/Nightlight, Energy Star Certified, White Quiet Bathroom Ventilation Fan

  • Quiet 0.9 Sones, 110 CFM fan with choice of three designer grilles in White, Satin Nickel, or Oil Rubbed Bronze.
  • 10W 3000K 800 Lumens LED Light with 0.7W Nightlight included.
  • Installation friendly- Quick-mount adjustable metal bracket for new construction and retrofit.
  • 4”, 5: and 6” metal duct adaptor included.
  • Meets today’s demanding building specifications- ETL Listed for wet application, ENERGY STAR certified, CALGreen, JA-8 Compliant for CA Title 24, and ASHRAE 62.2 compliant.
  • Housing dimensions- 10 2/5”x10 2/5”x 7 ½”.
Check Stock

Veris,Current Switch,Micro,Split-Core,Fixed,NO, H300

  • Hawkeye 300 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern..
  • Applications: Monitoring on/off status of electrical loads. Monitoring direct-drive units, exhaust fans, and other fixed loads. Verifying lighting run time. On/off status for direct-drive fans, pumps, and process motors. More reliable for status than relays across auxiliary contactsIdeal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads. Great for lighting status. Less expensive than 277V relays. Low 0..
  • Ideal for small exhaust fans (not intended to detect belt loss. Removable mounting bracket provides installation flexibility. Monitor status of fans, pumps, motors & other electrical loads. Split-core for fast retrofit installation. Micro housing for tight enclosures..
  • Saves valuable panel space 100% solid-state, no moving parts to fail. Polarity insensitive output 5-year limited warranty..
Check Stock

GSKMOTOR Rocker Arms Trunion Repair Upgrade Kit Replacemnt for Chev Pontiac LS 4.8 5.3 5.7 6.0 6.2 LS1

  • Economical and practical：These COMP Cams GM LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications. These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
  • FITMENT: for 1997-NOW LS1/LS2/LS3/LS6/LS7 4.8/5.3/5.7/6.0/6.2/7.0 Engines.
  • for 1997-2004 Chevrolet/for 1998-2002 Pontiac.
  • Easy to install: Installation is fairly simple with the use of a press or a simple vise along with basic hand tools..
  • Listing included:-16 rocker arm trunnions- LS-type retrofit.
  • 32 rocker arm bearings- LS-type retrofit.
  • 32 rocker arm retaining rings- LS-type retrofit.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

Luxrite New Construction Mounting Plate, 2-3-4 Inch, Extendable Hanger Bars, Sliding Plate, 4 Cutout Sizes - Recessed Lighting Shallow Housing (6 Pack)

  • FIT TO YOUR LIGHT - Accommodates a wide range of 2 Inch, 3 Inch, and 4 Inch LED retrofit downlights. Great when paired with ultra thin or low profile recessed lighting kits with junction box. There are 4 different hole sizes so you can find which will work for your setting..
  • ADJUSTABLE DESIGN - Both 13.75 inch hanger bars are extendable to a maximum length of 25.88 inches and the mounting plate can slide along the bars from end to end..
  • NEW CONSTRUCTION - Perfect for installing LED recessed lighting kits into new house constructions or home remodels..
  • EASY INSTALL - Each mounting plate is quick and simple to install with the included bracket nails. Every nail also has a stopper which allows for easier removal, when needed. Model # LR41004.
Check Stock

HALO Air tite Housing Remodel 5\

  • Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
  • Insulation contact rated: Designed for insulated ceilings where contact is necessary.
  • Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
  • Exclusive remodel speed clamps securely lock from 3/8 in. to 2 in. ceilings eliminating the struggle often experienced with recessed housing clips.
  • Compatible with a wide variety of 5 inch Recessed light trims but is best with Halo 5071, 5070, 5054, 5051, 5021, 5020, 5016, 5001, 5000 series models.
  • Compatible with a wide variety of 5 inch LED retrofit trims but is best with Halo quality RL, RA, SLD, LT, SMD, and ML series models (Bulb free with some having a 45 year LED lifespan).
  • Slide-N-Side Junction Box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
  • High performance E26 Series 5 inch trim options available.
  • Socket bracket adjusts lamp to various trim styles and designs.
  • Three Quick Connect connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
Check Stock

A/C Retrofit Valve Kit-Refrigerant Retrofit Valve Set, with R12 to R134A Low Side Adapter, BPV31 Bullet Piercing Valve, for HVAC Refrigerant System R12 R22 R502 R134A (2)

  • 【A/C Retrofit Valve Kit】The a/c recharge valve kit includes：1 pieces r22 to r134a low side adapters with dust cap, 1 pack BPV31 bullet piercing tap valve (with 1 piercing valve, 1 hex key, 2 adapters).
  • 【R12 to R134A Retrofit Conversion Adapter】The ac retrofit valve with blue dust cap with 7/16” low side port can convert from R12, R22, R502 to R134a.
  • 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. And the bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Premium Material】The r12 to r134a retrofit conversion fitting is made of premium brass and the BPV-31 bullet piercing tap valve is made of zinc alloy, which make the retrofit valve kit durable for long-time use to meet your daily repair work need.
  • 【Wide Application】The a/c recharge valve kit usually used for automotive or home air conditioning refrigerant systems. Suit for vehicles pre-1994, comes with R-134a refill fittings.
Check Stock