Top Retrofit Drain

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72629 LED Recessed Lighting Retrofit Kit 8\ 35W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Parker Quick-Fit Drop-in Farmhouse Fireclay 33.85 in. 3-Hole Double Bowl Kitchen Sink with Drains

  • Kit Includes: Sinkology Parker 33.85" 3-Hole double bowl fireclay Quick-Fit drop-in farmhouse kitchen sink with rear off set drains and Sinkology Stainless Steel Basket Strainer Drain (#TB35-03).
  • Dimensions: Outer - 33.85" x 24.25" x 9" / Inner Bowl (each) - 15" x 17.75" x 8".
  • The Parker features a Quick-Fit drop-in mounting style for retrofit installation with existing cabinets and countertops as well as a classic farmhouse design - exposed apron-wrap front, smooth side walls, and large double-bowl basin with rear offset drains..
  • Handcrafted with SureFire - Sinkology’s fireclay material that is fired at 2100° to solidify the material into one of the most durable on the market.
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72631 LED Recessed Lighting Retrofit Kit 8\ 35W 5000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

ZUHNE Drop In Kitchen, Bar and RV Stainless Steel Sink (33x22 Single Bowl)

  • TOP MOUNT KITCHEN SINK One hole overmount deck for easy retrofit install on any countertop incl laminate and butcher block – drill additional holes without voiding warranty.
  • RUST PROOF STAINLESS SINK Impact and scratch resistant 18/10 T304 steel inside out – designed to handle heavy cast irons or hot pans directly from the oven.
  • PROTECT YOUR CABINETS Features sound pads and thermal insulation coating so that you can flush ice or defrost frozen items in the sink without condensate damage to sink cabinetry.
  • EASIEST SINK TO MAINTAIN Same brushed finish as premium kitchen appliances with easy clean curved corners and sloped base to drain and dry faster - gentle wipe keeps sink sparling forever.
  • SAFEST CHOICE Certified to US and Canada codes – Compatible with garbage disposal - Daily product support from US call center – Zuhne is BBB A+ rated and Inc5000 fastest growing American owned and operated brand.
Check Stock

Morris Products 72656 LED 4\ Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K, 1-Pack

  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K provide an energy efficient alternative to Incandescent lighting..
  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K features include:.
  • Can be installed in most 4" downlight cans.
Check Stock

GSKMOTOR Rocker Arms Trunion Repair Upgrade Kit Replacemnt for Chev Pontiac LS 4.8 5.3 5.7 6.0 6.2 LS1

  • Economical and practical：These COMP Cams GM LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications. These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
  • FITMENT: for 1997-NOW LS1/LS2/LS3/LS6/LS7 4.8/5.3/5.7/6.0/6.2/7.0 Engines.
  • for 1997-2004 Chevrolet/for 1998-2002 Pontiac.
  • Easy to install: Installation is fairly simple with the use of a press or a simple vise along with basic hand tools..
  • Listing included:-16 rocker arm trunnions- LS-type retrofit.
  • 32 rocker arm bearings- LS-type retrofit.
  • 32 rocker arm retaining rings- LS-type retrofit.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

A/C Retrofit Valve Kit-Refrigerant Retrofit Valve Set, with R12 to R134A Low Side Adapter, BPV31 Bullet Piercing Valve, for HVAC Refrigerant System R12 R22 R502 R134A (2)

  • 【A/C Retrofit Valve Kit】The a/c recharge valve kit includes：1 pieces r22 to r134a low side adapters with dust cap, 1 pack BPV31 bullet piercing tap valve (with 1 piercing valve, 1 hex key, 2 adapters).
  • 【R12 to R134A Retrofit Conversion Adapter】The ac retrofit valve with blue dust cap with 7/16” low side port can convert from R12, R22, R502 to R134a.
  • 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. And the bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Premium Material】The r12 to r134a retrofit conversion fitting is made of premium brass and the BPV-31 bullet piercing tap valve is made of zinc alloy, which make the retrofit valve kit durable for long-time use to meet your daily repair work need.
  • 【Wide Application】The a/c recharge valve kit usually used for automotive or home air conditioning refrigerant systems. Suit for vehicles pre-1994, comes with R-134a refill fittings.
Check Stock

Morris 72604 Products LED Recessed Lighting Retrofit Kits – for Recessed Downlighting, Alternative to Incandescent Lights – Energy Efficient, Dimmable - – Bezel, 3000K, 9 Watts, 4”

  • COMPLETE LIGHTING KIT: Easily install recessed downlighting with this LED Recessed Lighting Retrofit Kit that offers an energy-efficient alternative to incandescent light fixtures..
  • RELIABLE LIGHTING: Make safety a top priority with this LED Recessed Lighting Retrofit Kit that delivers 659 to 2600 lumens, 50,000+ hours life expectancy and offers a smooth or baffle bezel style..
  • LIGHTING UNIT OPTIONS: This LED Recessed Lighting Retrofit Kit for residential or commercial use is available with 9, 12, 10.5, 14.5, 25 and 35 watts, voltage of 120VAC and durable aluminum housing and trim..
  • DURABLE CONSTRUCTION, HIGH OUTPUT: Rely on the high output of this LED Recessed Lighting Retrofit Kit that is compatible with most household dimmers and is equipped with a simple screw-in installation and in-line pluggable disconnect..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Morris Products LED Recessed Lighting Retrofit Kits – for Recessed Downlighting, Alternative to Incandescent Lights – Energy Efficient, Dimmable - Smooth Bezel, 4000K, 9 Watts, 4”

  • COMPLETE LIGHTING KIT: Easily install recessed downlighting with this LED Recessed Lighting Retrofit Kit that offers an energy-efficient alternative to incandescent light fixtures..
  • RELIABLE LIGHTING: Make safety a top priority with this LED Recessed Lighting Retrofit Kit that delivers 659 to 2600 lumens, 50,000+ hours life expectancy and offers a smooth or baffle bezel style..
  • LIGHTING UNIT OPTIONS: This LED Recessed Lighting Retrofit Kit for residential or commercial use is available with 9, 12, 10.5, 14.5, 25 and 35 watts, voltage of 120VAC and durable aluminum housing and trim..
  • DURABLE CONSTRUCTION, HIGH OUTPUT: Rely on the high output of this LED Recessed Lighting Retrofit Kit that is compatible with most household dimmers and is equipped with a simple screw-in installation and in-line pluggable disconnect..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock