Top Reverse Flare Tool

SATA 3-Piece Full-Polish SAE Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09032U

  • [VERSATILE SET] Professional tool set grips six common standard sizes of flare nut with 3/8x7/16, 1/2x9/16 and 5/8x11/16-inch tools.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

Robinair RAVG-1 Digital Micron Vacuum Gauge

  • Robinair's Digital Micron Vacuum gauge is a cutting edge tool with an industry first multi-color backlight that functions as an instant go/no go indicator of acceptable vacuum or leakage.
  • Patent Pending design employs a sophisticated MEMS Pirani sensor providing extreme accuracy at low micron levels and rapid response to changes in vacuum - range is from atmosphere down to 10 microns.
  • Large, easy to read 5 digit display shows vacuum readings in 6 different scales - Microns, mmHg, inHg, mBar, Pascals, or Torr.
  • Gauge features a features an impact and water resistant case with protective rubber boot, integrated 'magnetic' hook, and an auto shut-off feature that prolongs battery life.
  • Includes a protective carrying case and 1/4 inch male flare X 1/4 inch male flare and 1/4 inch female flare X 1/4 inch male flare connectors/adapters.
Check Stock

General Tools 823 Digital Angle Finder Rule, 10-Inch

  • PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
  • LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
  • MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
  • PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
  • LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
  • Power source: "CR2032" Lithium-ion battery (included).
Check Stock

Sunex Tools 9809A Flare Nut Wrench Set, 1/4'x5/16' - 5/8' - 11/16', 9mm x 11mm - 19mm x 21mm, Fully Polished, 9-Piece (Includes Roll-Case), SAE & Metric

  • [Versatile Set] Professional tool set grips six common standard sizes of flare nut with 3/8x7/16, 1/2x9/16 and 5/8x11/16-inch tools.
  • [Protective Nut] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot, Suitalbe for use on hex nuts made of softer materials.
  • [Easy To Clean] Chrome plated, full-polish mirror finish wipes clean easily and resists rust or corrosion.
  • [Strength&Durability] One-piece alloy steel tool construction maximizes durability for better strength and longer tool life.
  • [Mechanic’s Tool] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock

Capri Tools Telescopic Tube Cutter, 1/8-1-3/8 in.

  • The Telescopic Tube Cutter lets you easily make clean and precise tubing cuts on hard and soft copper, aluminum, brass, thin-walled steel, and plastic tubing in 1/8 to 1-3/8 in. outer diameter.
  • Heavy-duty ergonomic tightening knob with ultra-smooth turns gives you maximum control of cutting pressure. Precision four-roller set helps make precise cuts easy. Rollers also have flare grooves for close-to-flare cutting.
  • Fast, tool-free blade replacement: release or secure the detent wheel pin with a simple push.
  • Built-in retractable reamer deburring tool with replaceable blade.
  • Comes with a high carbon steel cutting wheel for making clean and precise cuts.
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Wostore Double Flaring Tool Kit for 3/16″-5/8″ 7 Dies Automotive Line Tubing Cutter with Replacement Blade and Remear

  • 【Set Included】Flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1..
  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration. Suitable for most soft steel, aluminum, brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8″, 7/16″, 1/2″, 5/8″(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion.Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

RK Racing Chain UCT2100(50) Universal Chain Breaker, Cutter, Press-Fit and Rivet Tool

  • Quickly and easily breaks 40 and 50 type chain.
  • easily press-fits tight tolerance 40, 50 O-ring chain side plates to the correct depth for clip or rivet link installation.
  • New design allows components to lock into tool body and larger pressure bolt for easier use without dropping tool components.
  • Flares RK's special pin hole rivet links to the proper dimension to secure sideplates in place.
  • Redesigned sure-grip handle and laser engraved part number for easier part identification.
  • The redesigned Rivet Flare Pin now features a flare guard to prevent over riveting.
Check Stock

Orion Motor Tech Crowfoot Wrench Set for 8 to 24 mm Flare Nuts, Crowfoot Flare Nut Tool Kit, 15 Piece Large & Small Metric Wrench Set for 3/8\ and 1/2\ Drives Ratchets Extenders for Nut Removal

  • 15 PIECE WRENCH SET: This metric crowfoot wrench set includes 15 flare nut wrenches to specifically reach and manipulate flare nuts on hard-to-reach areas of larger-sized cars, trucks, dozers, tractors.
  • VERSATILE APPLICATION: These multipurpose adjustable wrenches easily remove flare nuts of 15 sizes from 8 mm (5/16 in.) to 24 mm (15/16 in.), working with your torque wrenches to satisfy various vehicle servicing needs.
  • RUGGED CONSTRUCTION: These mechanic repair tools are made from heavy duty structural Cr-Mo steel for reliable strength and durability.
  • the flare nut wrenches are further coated to resist wear, tear, and corrosion under even punishing use.
  • EASY OPERATION: Our flare nut wrenches work well with your 3/8" or 1/2" ratchets, extenders, torque wrenches, or flare nut wrenches to service your machinery quickly and easily.
  • the included blow-molded case provides organized storage for easy transport.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this flare nut tool kit with a strong 1 year warranty and our usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your vehicles for years to come!.
Check Stock