Top Reverse Thread Stud Extractor

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • TOOL INTRODUCTION - Damaged bolt extractor 3/8" inch drive. It is suitable for most drive tools and can be used with manual or pneumatic impact wrenches and ratchets as well as adjustable wrenches and flat wrenches. Heat treated alloy steel is very durable and chrome-plated, will not be damaged by high-strength work, and will add lubricant to the internal rotating threads to provide better protection against rust and wear..
  • OPERATIONAL GUIDANCE - Simple operation does not need to be considered. Place the stud extractor on the stud and turn the bottom hex flat nut counterclockwise to tighten the jaws. After the jaws hold the broken bolt or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
Check Stock

YUENTOEN Stripped Screw Extractor - 5pcs HSS Easy Out Broken Bolt Extractor Kit with Extension Screw Holder, Damaged Bolt Water Pipe Remover Set Power Drill Bit Tool for Screw or Bolt 1/8 to 3/4 inch

  • 【High Quality】These 5 piece broken screw remover set is made of high-speed steel with jagged irregular cuts, which can create more extraction possibilities for broken screws or bolts for extra durability and a good lifespan..
  • 【Meet Any Requirement】5 x Broken bolt extractor with magnetic extension screw holder, screw extractor size includes #1 for 1/8"-1/4", #2 for 1/4"-5/16", #3 for 5/16"-7/16", #4 for 7/16"-9/16", #5 for 9/16"-3/4"..
  • 【Clever Design】Reverse thread bits spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the screw extractor's grip increases..
  • 【Simple to Use】First attach drill bit(Dr) to the extension bit holder, then the drill should be moving the bit counter clockwise(and please use the slow speed), finally use the screw extractor(Ex) side to remove the screw-bolt..
  • 【Wide Application】Allows the bolt remover to work with rusted, cracked, damaged or stripped screws, studs, bolts, ....
Check Stock

HWK Adventure/Touring Motorcycle Jacket For Men Textile Motorbike CE Armored Waterproof Jackets ADV 4-Season (Black, 3XL)

  • The Adventure Mirror offers the ultimate in visibility and durability for Adventure bikes..
  • Includes two Adventure Mirrors, two 6” RAM Arms, two Ball Stud Bases (10 x 1.25mm thread), two Extension adapters (10 x 1.25mm), two Beemer adapters (10 x 1.5mm), and one Reverse-Thread adapter (10mm x 1.25)..
  • Additional adaptors required for pre-2005 Beemer and 2019-current Scrambler 1200. Check Doubletake website for fitment..
Check Stock

Irwin Tools 53914 Accessories Impact Bolt Grip 3/4 /19mm 1/2 Dr

  • Bolt extractor is built for maximum durability and long life with impact drivers.
  • High-carbon steel helps ensure long bolt extractor life and great durability.
  • Universal lobular design fits most types of fasteners.
  • Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.
  • Black oxide finish resists corrosion and increases the life of the bolt extractor.
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock

Thread Checker Lug Nut & Wheel Stud SWTC-LN8 Bundle with a Lumintrail Keychain Light

  • Lug Nut Thread Checker - Each size has a lug nut and wheel stud checker on the same gauge. Thread sizes are permanently stamped onto each gauge..
  • Wire Cable Thread Checker - The individual gauges rotate freely on the wire cable for fast thread verification..
  • Durable Tools - Built to last & manufactured from high grade aluminum..
  • The Lug Nut Thread Checker is an accurate and easy-to-use thread identifier for both lug nuts and wheel studs. Each individual gauge features a male threaded stud on one end to measure lug nut threads and a female threaded hole on the other to measure wheel stud threads..
  • Thread Gauge Size Specifications by Color: M14 x 2.00 - Gold.
  • 1/2-20 - Black. Bundle with a Lumintrail Keychain Light.
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Solary Aluminum Weld Stud Weld Studs CD Type Weld Stud Capacitor Discharge CD Stud 1 Set for Welding Bolt Plate Insulationnail Spot Welders

  • ①Appartus for aluminum stud -Raw Material:Copper. -Length:65mm..
  • ②Aluminum stud connector -Raw Material:Aluminum . -Length:60mm..
  • ③Aluminum stud -Raw Material:Aluminum . -Length:15mm..
  • ④Dent pulling hook -Raw Material:iron. -Length:77mm. -Weight:about 41g..
  • ⑤Welding Extractor -Raw Material:Copper. -Size:L50*W50mm. -Weight:about 60g..
Check Stock

Damaged Screw Extractor Kit, Stripped Screw Extractor Set, Drill Bit Set, Broken Bolt Extractor and Screw Remover Set,Made From H.S.S. 4341#, Set of 6 Pcs Stripped Screw Remover

  • [POWERFUL Stripped Screw Extractor ] : Striped Screw Works with Any Size Screw or Bolt Extractor Removes Even the Most Stubborn Stripped, Damaged, Embedded, Rusted and Painted-over Screws and Bolts.To Use The Grinding Head,The Screw Mouth Neets To Be Polished To A Sufficent Denth. The Greater The Depth, The Faster The Extraction Head Can Extract..
  • [WIDE VERSATILITY]:6 Piece Screw Extractor Set(#0, #1, #2, #2, #3, #4) Works with any Drill and any Size Screw or Bolt. Such as Common Hexagon Bolts, Lag Screws, Wood Screws, Hexagon Socket Screws, Machine Screws, Sheet Metal Screws and Other Screws, This Damaged Screw Extractor can Remove All Common Sizes of Damaged, Stripped or Broken Screws..
  • [HIGH QUALITY HSS 4341 AND TITANIUM PLATED] This Damaged Screw Removal Tool Kit Screw Extractor is Made of HSS 4341 High-Quality Speed, The Hardness is Up to 65 HRC, The Density And Hardness Are About 20% Higher Than The Ordinary Steel in The Market.
  • The Hardness is High, And it is Durable , Any Damaged Screws Can be Easily Removed. And We Plated a Layer of Titanium Extractor on it to Make it not Easy to Rust, Easier to Store, and More Beautiful..
  • [EASY OPERATION] A Damaged Screw Adapter can get the Job Done in Two Simple Steps , Choose a Bit Smaller Than the Damaged S....
Check Stock

uxcell M3x20mm 304 Stainless Steel Double End Threaded Stud Screw Bolt 50pcs

  • Package Content: 50(+/-2%)pcs x Double End Stud.
Check Stock

Straight Fluted Screw Extractor Set 5 Pcs M4-M18 | 3/16-Inch to 5/8-Inch Easy Out Bolt Extractor Set for Broken Bolt Thread Repair Carbon Stee

  • 1.STRAIGHT FLUTED SQUARE BROKEN SCREW EXTRACTOR：Solve the problem that the broken screw cannot be removed. 5 models can deal with metric M4-18 or....
  • 2.SCREW RANGE USE:NO.1 M4-M6~2.2-4.6MM Drill Bits.
  • 3.SQUARE CLAMPING:The tail is square, which is convenient for the tap to clamp and manually exit the screw..
  • 4.STRAIGHT FLUTED: Directly and quickly jam the inside of the screw after drilling to facilitate the removal of the screw..
  • 5.THE SCREW TYPE IS APPLICABLE: Phillips screw, internal hexagon screw, external hexagon stud, flat screw, etc., as long as the screw thread diameter....
Check Stock

Segomo Tools 13 Piece Lug Nut and Bolt Extractor Removal Metric and SAE Socket Tool Set 8-19mm | Lug Nut Remover | Bolt Remover | Lug Nut Extractor | Extractor Set | Lug Nut Removal Tool - NBE13819MM

  • [ Easy To Use ] Our lug nut remover is designed with left-hand spiral for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Every Size You Need ] This nut extractor set comes in sizes: 1/4, 5/16(8mm), 3/8, 10mm, 7/16(11mm), 12mm, 1/2, 13mm, 9/16(14mm), 5/8(16mm), 17mm, 11/16, 3/4(19mm). Can be used on SAE and Metric sizes.
  • [ Will Last In Time ] The lug nut extractor set is made from black chrome molybdenum that provides greater strength and durability and prevents corrosion. Our extractor socket set will be with you for years..
  • [ Versatile Design ] The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws. You can use this bolt extractor set on different projects..
  • [ Used With Multiple Tools ] 3/8 square drive of each bolt extractor tool can be used with flat wrench, pliers, socket wrench, adjustable wrench, Vise-Grip locking pliers, hand ratchets or impact wrench guns and air ratchets. Lifetime warranty.
Check Stock