Top Rf Components

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...ble TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port i....
Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
  • 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
  • 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
  • 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
  • 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock

MPD Digital LMR400-N-male-to-N-male-20 Feet LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss LMR400

  • LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
  • LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
  • CONNECTOR TYPES: N type male to N type male.
  • ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
  • Ensures maximum performance for your antenna installation..
  • OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
  • WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.
Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

  • 【Product Parameters】- Working Voltage: 3---5V.
  • Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
  • 【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
  • 【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
  • 【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.
Check Stock

MPD Digital LMR400-N-male-to-N-male-250ft LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss Transmission Line LMR400

  • LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
  • LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
  • CONNECTOR TYPES: N type male to N type male.
  • ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
  • Ensures maximum performance for your antenna installation..
  • OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
  • WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.
Check Stock

onelinkmore BNC Female to Dual Banana Male Plug Jack Binding Posts RF Coaxial Adapter BNC to BNC Male Banana Coax Jack Splitter Connector Pack of 2…

  • Type: BNC to BNC Banana Male Plug Coaxial Adapter Binding Post RF Coax Coaxial Splitter Connector.
  • Binding posts facilitate connections of test leads or additional components,Used for adapting single BNC Plug to Dual Banana Jack and Provides....
  • Function: One side is BNC Female with inner bore, and the other side is two banana Male plug binding posts, used for connecting BNC to Banana RF....
  • Widely used for Antennas, Coaxial cable, LMR, Wireless LAN Devices,Connections can be made to the binding posts by spade lugs, banana plugs or wire....
  • 2 Pieces BNC to Banana Binding Post Plug Connector included.
Check Stock

KEYESTUDIO Mini ESP32 Development Board with ESP-WROOM-32 Microcontroller Dual-Mode WiFi + Bluetooth Integrates Antenna, RF,AMP, Filter AP STA for Arduino

  • The ESP-WROOM-32 module is an industry leading integrated WiFi + BLE solution with less than 10 external components..
  • It integrates antenna switch, RF balun, power amplifiers, low noise amplifiers, filters and power management modules..
  • It also integrates with TSMC's low-power 40nm technology, so that power performance and RF performance are safe and reliable, easy to expand to a variety of applications..
  • The board has brought out most I/O ports to pin headers of 2.54mm pitch. These provide an easy way of connecting peripherals according to your own needs..
  • Board is fairly well built and fits nicely on breadboard..
Check Stock

NESDR Smart v4 RTL-SDR Essentials Starter Kit - Includes Everything to Start with Software Defined Radio Including Premium SDR Flamingo FM Bandstop Filter 3 Antennas 10 Adapters & Case

  • Includes all hardware and software (free download) you need to get started with software defined radio!.
  • Listen (and see!) nearly any RF signal within the frequency capability of the radio (27-1700MHz).
  • Included is an NESDR SMArt v4 RTL-SDR, 3 antennas, a "Flamingo FM" broadcast FM bandstop filter, 10 RF adapters and cables, and a carrying case.
  • Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support....
  • Amazon-exclusive bundle! Only available for a limited time.
Check Stock

Aven 13016 9 Piece Anti-Static Alignment Tool Kit

  • Kit contains nine alignment tools constructed from a special nylon type material that cannot retain a static charge.
  • Ideal for electronic or TV technicians, or for adjusting conventional components including if cans, RF coils, trimmers, potentiometers, etc.
Check Stock

Standard Ignition PDS-148 Power Door Lock Switch

  • *** Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict actual item and necessary components ***.
  • Fits Part Numbers: RF50560001 / XL1Z14028AA.
  • This Brand New Door Lock Switch built according to the highest standards of quality and precise specifications..
Check Stock

Nooelec Dual-Band NESDR Nano 2+ ADS-B 978MHz UAT & 1090MHz 1090ES Bundle for Stratux™ Avare Foreflight FlightAware & Other ADS-B Applications Includes 2 SDRs 4 Antennas 5 Adapters.

  • Includes 2pc NESDR Nano 2+ SDRs. Each SDR is lab-calibrated and EEPROM-programmed for simple Stratux software setup..
  • Each NESDR Nano 2+ includes a high-quality 0.5PPM TCXO. This ensures tuning stability, even in extreme temperature conditions (like those which occur....
  • Each SDR includes a calibration sticker and identification labels..
  • 4 ADS-B antennas, 3 RF pigtail cables and 2 RF adapters are included to facilitate a very wide range of installation options for embedded....
  • Full 2-year warranty through Nooelec on all bundle components..
Check Stock

General Electric Compact RF Modulator, Audio Video to Older TV, Black, 34138

  • Converts video & stereo Audio from any A/V component into a coaxial cable output.
  • Eliminates need to continually connect & disconnect equipment.
  • Compatible with RCA-type antenna connections.
Check Stock