Top Rf Dc Plasma

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, 1/2 Inch Clean Cut, Brown & PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22)

  • Product 1: ★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Product 1: ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • Product 1: ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33".
  • ★ NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
  • Product 1: ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • Product 2: Only Compatible with BROWN Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: NOT Compatible with Red Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: Includes: 10 Nozzles 10 Ele....
Check Stock

Frequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz

  • WITH VARIOUS PORTS-- There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use..
  • POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
  • EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
  • APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base sta....
Check Stock

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

BTF-LIGHTING Mini 5 PIN RGBW 5050 RGB+White RF Remote Controller 28 Keys for RGBW LED Strips DC12V/DC24V Adjust Speed/Brightness/Color/Scene

  • Voltage：It can support 5V/DC12V/DC24V LED strip.
  • Voltage depends on LED strip,DC12V LED strip,please use DC12V power supply,don't use DC24V for this controller when you light up DC12V LED Strip. 5V＜30W 12V＜72W 24V＜144W Output Current :Max 6A.
  • The RF remote control is a full-touch control mode. Thin type, light weight, excell. In an open environment, the remote control distance is 20-30 meters. Signal transmission capacity is much better than IR controller.
  • 5.5mmx2.1mm Power Jack Adapter Plug. + G R B W order 5 PIN female Output connector . The order is (+ G R B W) not (+ R G B W ).
  • RF wireless remote control is more convenient and sensitive than IR remote control, and can be controlled without aiming at the receiver.Can light up pure white light individually . You can mark four lighting effects you like.
  • Easy installation, long transmission distance, beautiful appearance, practical function.
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

18-Inch Plasma Ball，Large Plasma Ball，Plasma Disc Plasma Globe,for Party, Decorations, Prop, Home，Science and Education, Museum

  • Super bright technology: The plasma ball adopts ultra-high brightness technology, combined with micro electronic equipment, to make an incredible plasma ball with the same shape as the globe..
  • Electric current at your fingertips: Touch the earth and generate electric charges that follow your every move!.
  • Perfect for decoration: This 18-inch plasma ball with three colors of green, blue and red is the perfect decoration for bedroom, living room, office or any other place! It will create a cool scientific atmosphere for you..
  • Product technology: diameter: 18 inches Input: 110-240V, AC, 50/60Hz. Output: 24V, DC, 2500mA Color: Rad Green blue.
  • Product size: 20 inches × 20 inches × 34 inches.
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

MHCOZY 4 Channel Smart WiFi RF Bluetooth Wireless Dry Contact Relay Switch Module,Phone app Remote Control,Work with Alexa Google Home (Tuya 4CH 5V AC/DC7-32V)

  • Easy to setup,4CH Pro WIFI Wireless Dry contact Relay Smart Switch with RF Function,working power DC 5V or AC/DC 7-32,support 2.4G wifi only,when pairing,please make sure to put the relay close to your router,Once it’s powered on,if the indicator light flash 2 short 1 long,no need to long press pairing button,tap to pair in ewelink app directly..
  • 3 working mode,momentary latching and interlock,set work mode as channel in ewelink app,you can set 2ch with inching for add wifi control togarage door opener,another 2ch self-locking to automate lights.
  • WIFI and RF Remote Control,with 433mhz receiver bulit in(433Mhz RF doesn’t include)support learning code 433Mhz RF only.4 button on the board,press each button to pair/remove RF as channel,independently control 4 appliance,real state feedback and historical operating discipline in ewelink app.
  • Timing and Sharing. Smart Scene: Trigger on/off by temperature, humidity or other environmental conditions,It supports 8 group timing function and Share Control with Family.
  • Voice Control,works with Alexa Google Home Nest IFTTT, Link "eWeLink Smart Home Fan" capability. You can request Amazon Echo / Echo Dot / Amazon Tap directly to turn your devices on / off.Remote ON/OFF Your Lights Garage Door on/off from anywher....
Check Stock

Marker (Radio Vrs. With Melody)

  • ⭐Common use for car, truck, motorcycle, scooter, trailer, RV, boat.with DC12V voltage. Fitment: Replacement LED bulb for: W5W 194 147 152 158 159 161 168 184 192 193 259 280 285 447 464 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825 921 906 579 and others..
  • ⭐The distance between the RF remote control with bulbs can reaches 12-30 meters.?No need pointing the RF remote control to bulbs and control all bulbs in within control.?Can control bulbs in the vehicle..
  • ⭐LED Chips Type: 3535 SMD, Chips QTY: 4 pcs/Bulb, Color: RGB 13colors, Voltage: DC 12V, Wattage: 6W/Pair, 3W/Bulb, Output: 0.25A/Bulb, Size: 1.5inx 0.43inx 0.45in (38mmx 11mmx 9mm), Lifetime: More than 30000 hours, Package: 4 pcs bulbs & 2 pcs RF remote.
Check Stock

DC 12V 40A Relay Remote Control Switch, 1CH Universal 433Mhz Remote Control Wireless Latching Function Switch for Industrial Control and Low Voltage Power Systems & More

  • 【Easy & Convenience】 We have made transmitter and receiver working together and test it before ship it,when you get it don’t need to do anything ,just install it..
  • 【Application】Suitable for electric control circuits of remote control electric doors and windows, signal control, industrial control, lifting equipment,12V batterys, power switch for low voltage DC power sources, dc LED lighting and low voltage power systems and a wide variety of 12 volt equipment. Ideal for direct control of various loads.
  • 【SIGNAL Stability】the RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 20–50meters with no obstacle..
  • we send latched mode default ( that is, Press the button “on” , the receiver relay is ON.
  • Press the button “off”, the receiver relay is OFF ). You can switch to different modes as needed，Latched/Momentary / Toggle / 5 seconds delay (If you encounter any problems in use, please feel free to contact us any time, we will be happy to serve you, thank you very much ).
Check Stock

2021 UltraArc 205 200 Amp Multi Process Welder TIG Stick Pulse 50 Amp Plasma Cutter Dual Voltage 110v/220v

  • UltraArc 205 model with PULSE , Welds Steel, Stainless Steel and Titanium.
  • IGBT inverter technology, NEW digital interface.
  • 200A TIG / 200A STICK / 50a PLASMA CUTTER COMBO / 5 years waranty.
  • Great Arc stability for TIG/Stick functions due to IGBT inverter design.
  • 1/2" weld on DC TIG, 1/2" cut on Plasma, Dual Voltage 110v/220v.
Check Stock