Top Rf Receiver Module

Rage RC A1305 Curtiss P-40 Warhawk Micro Rtf Airplane W/Pass

  • 1) Bring the transmitter and the receiver close to each Other, within 20 inches (half meter)..
  • 2) Integrated stabilizing circuit, operating voltage up to 1-2S Lipo, it won’t be out of control for sudden low voltage.
  • 3) Light weight, micro size, full 4CH output, especially for Mini-Z or mini aircraft..
  • 4) Operating Voltage: 3.3V～8.4V Weight: 3.5g ,Channels: 4CH, Built-in Antenna.
  • 5) Compatible: Futaba S_FHSS/ TM-FH RF Module control system.
Check Stock

Kenwood KFC-1673MRWL 6-1/2\ 2-Way Marine Speakers with Grilles (Pair) | Built-in LED Lights (White)

  • The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone..
  • There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes..
  • Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer..
  • A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's..
  • Water-resistant PP Cone (IPX5) , UV resistant woofer grille and cone.
Check Stock

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone

  • Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight.
  • Supports redundancy function Support telemetry and Smart Port enabled.
  • US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail....
Check Stock

Durablow TR1003 Gas Fire Fireplace On/Off Remote Control Kit + Thermostat + Timer for Millivolt Valve, IPI Module, Replaces Wall Switch or Thermostat

  • ★★ ATTENTION: This device is NOT a power supply/Ignitor unit. (No voltage output itself, but passing voltage from your fireplace thermopile for safety reason). Please connect it with power source or circuit in series if using it as a switch. ▼ Durablow battery powered R.F. + LCD screen transmitter and receiver kits give wireless remote control to a gas heating appliance, such as gas fireplace. ▼ Childproof safety lock available. ▼ The temperature range is from 45℉ (7℃) to 99℉ (37℃) ..
  • ▼ Thermostat feature in transmitter turns ON/OFF when room temperature changes. It also operates the fireplace with the room temperature swings 1 °F, 2 °F, or 3 °F. ▼ Timer feature operates at options of 15 minutes Min. to 9 hours Max...
  • ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to gas MILLIVOLT valve or electric spark ignition module. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first).
  • ▼ Replaces Cross Reference Model #: SKY, 9800322, 9800323, 9800324, 9800326, 9800328, 9800329, 9800550, 9800580, 1001-A, 1001, 1001TH, 1001T, 1410T, 1410-A, 1410TH, 3002, 3301, CON, RCK-K, RCK-KS, 5001, 5010, 5301, 5310, 55644, HRC200 ▼ LEGAL DISCLAIMER: The Brand name & Model # (i....
Check Stock

HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm

  • Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other.
  • Compatible with SparkFun’s 434MHz RF transmitter and RF receiver.
  • This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!.
Check Stock

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

  • The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, with pin header. The module can be directly loaded into the various reader molds..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • Module Interface: SPI， Data transfer rate: Maximum 10Mbit/s..
  • Power Voltage : 3.3V,Operating frequency: 13.56MHz..
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

LICHIFIT AR6210 DSMX Receiver RX Support DSM2 for JR Spektrum Transmitter TX RC

  • New DSM-X works with all JR and Spektrum DSM-2 Rx's..
  • The AR6210 DSMX 6-channel receiver is a great solution for all model aircraft requiring full range up to six channels..
  • This DuaLink receiver simultaneously gathers information from two receivers that are processed by patent pending Spektrum software that combines it to form the most vivid picture of an RF signal..
  • This dual path redundancy, plus the fact each of the two receivers is located in a slightly different location, exposes each to a different RF environment and creates a bulletproof RF link in all conditions..
Check Stock

SIIG Ultra Compact Wireless IR Remote Control Extender Repeater Kit – 200M (CE-RC0014-S1)

  • ✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included..
  • ✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc..
  • ✅ INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay.
  • built-in LED indicator illuminates when the signal is received for easy status recognition.
  • ✅ HASSLE-FREE INSTALLATION: Ultra-compact design with bundled infrared extension cables allow easy and flexible placement. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal..
  • ✅ NOTE: We recommend using the kit without the IR extension cables. Simply placing the Receiver Unit in line-of-sight with source device can support longer range. Only use the extension cable if needed. Contact us with any questions..
Check Stock

MHCOZY Updated WiFi Wireless Smart Switch Inching Self-locking Relay Module,Set Inching Time from 0.5 second to 1 Hour,be applied to access control,DIY WIFI Garage Door Opener Smart life app 2CH

  • MHCOZY 2 channel Smart life APP Tuya WIFI Relay Module(with 433Mhz RF receiver built in,don't include 433Mhz RF,support learing code 433Mhz only),....
  • Easy Configure,Once it's Powered on,Phone Bluetooth will find the Smart Relay asap,tap and add to your 2.4G WIFI Network.After configured,even the....
  • Widely Usage,set on/off mode to automate your Light,Set Inching mode to DIY WIFI Bluetooth Garage Door Opener,set interlock to add wifi to your....
  • Schedule and Share,set sunrise sunset countdown repeat schedule,easy share remote control to family.
  • Voice control,one key to link to Alexa Assistant,use your voice command to open your Garage when busy.
Check Stock

FrSky Tandem X20S Transmitter with Built-in 900M/2.5G Dual-Band Internal RF Module

  • Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4G ACCESSMode (Compatible with ACCESS Receivers) 900M ACCESSMode (Compatible with ACCESS R9 868/915MHz Receivers) (*Capable of simultaneous working under ACCESS mode) 2.4G & 900M TD Mode (Compatible with TD Receivers).
  • Super-low latency and long-range control with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency) 800*480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs.
  • Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System (Compatible with FreeLink App3.0) Built-in Audio Wireless Module (Compatible with Bluetooth Audio Device).
  • All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45° to 60° stcik travel and 8° rotatable panel. ETHOS: The more pow....
Check Stock

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock