Top Rf Relays

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

  • This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
  • Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
  • For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
  • A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
  • Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..
Check Stock

Glarks 10 Pack 12V 30/40 Amp 5-Pin SPDT Electrical Relays Switch for Automotive Truck Boat Marine

  • ★ Package: Including 10 pack 5-Pin SPDT(Single Pole Double Throw) Electrical Relays Switch packed in a plastic box..
  • ★ Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87)..
  • ★ These Relays are Interchangeable/Compatible with: All automobiles and devices equipped with a 12 Volt DC power source..
  • ★ Application: These relays have a universal application and can be used in automotive setups, car sound systems, security systems, and various other applications..
Check Stock

PiRelay EXPANSION BOARD FOR RASPBERRY PI Raspberry Pi A+/B+/2B/3B/3B+ Loads up to 240VAC/7A,125VDC/10A by SB Components

  • Supports Raspberry Pi 3,2,A+/B+, Zero, Zero W 4 Relay control more High-quality.
  • Quality relays loads up to 240VAC/7A, 125VDC/10A Onboard LEDs for indicating relays status.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins Comes with development resources, including examples in python.
  • Control through PiRelay app on Andriod. best used with PiTalk.
Check Stock

waveshare Raspberry Pi Power Relay Board Expansion Board Module Three Channel(3-ch) for Raspberry Pi A+/B+/2B/3B/3B+/4B Loads up to 250VAC/5A,30VDC/5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
  • Onboard LEDs for indicating relays status.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins.
Check Stock

Nilight 90017C 3 Gang Aluminum Panel Toggle Dash 5 Pin On/Off Pre-Wired Rocker Switch Holder for Automotive Car Marine Boat, 2 Years Warranty

  • 40A/30A High Switching Capability. These relays have a universal application and can be used in automotive setups, car sound systems, security systems, and various other applications..
  • Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
  • These Relays are Interchangeable/Compatible with: All automobiles and devices equipped with a 12-14 Volt DC power source.
  • Package includes: 10 pack electrical relays.
Check Stock

6 Way Blade Fuse Holder Box,12-Slot Relay Box with Spade Terminals and fuses,6PCS 4Pin 12V 40A relays for car Truck Trailer and Boat

  • 6-way fuse box 6-relay holder with spade terminals and 6pcs fuse, 6PCS 4Pin 12V 40A relays(5PCS 4Pin 12V 40A Relays,1PC RTT7121 4-Pin 12V 40A relay).
  • Suitable for all marine, motor-home, automotive & motorsport applications..
  • Waterproof connector.Can be installed in circuit..
  • Can be fixed through 2 pre moulded holes on side..
  • Package Includes:1 Piece Relay Holder Box with fuses 4-pin relays and 36 Pieces Pins terminals..
Check Stock

Ingcool Compatible with Raspberry Pi Expansion Board Power Relay Module Kits for Raspberry Pi 4B/3B+/3B/2B/ A+/B+ 5A 250V AC/ 5A 30V DV

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.Photo coupling isolation, prevent interference from high voltage circuit.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins.Onboard LEDs for indicating relays status.
  • Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835.
Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

  • 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
  • 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
  • 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
  • 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
  • control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
  • 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..
Check Stock

MPC Emergency Manual Release Kit for Shaved Doors/Door Poppers

  • Built-in Relays - The new control module has built-in relays which eliminates 90% of wiring for a cleaner, faster, simplified installation. This system will shave AT LEAST an hour off the install time.
  • Single wire connections: No need to buy extra wire or make splice connections. Our new control module includes a wiring harness w/1 WIRE to run to each side of the vehicle & connect to the solenoid.
  • Programmable Safety Feature - To prevent accidents, our new control module automatically disables the door popper system if it sense that the vehicle is running.
  • Redesigned Remotes - Sleek two-button design w/a sliding cover to prevent accidental door opening while the remote is in your pockets. Press both buttons at the same time for optional trunk release!.
  • (2) Heavy-duty solenoids (45 lb. max pulling force), (2) chrome door poppers, RC receiver w/built-in relays per door, (2) 2-button 3 transmitters, (2) push buttons, steel linkage cable.
Check Stock

10 Pieces Refrigerator Starters QP2-4R7 4.7 Ohm 1 Pin Refrigerator PTC Starter Relays and 6750C-0005P Refrigerator Overload Protectors Refrigerator Parts Accessories

  • Package content: there are 5 pieces of 4.7 ohm 1-pin PTC starting relays and 5 pieces of 750C-0005P refrigerator overload protectors in the package,....
  • Compatible models: refrigerator overload protectors can effectively prevent the compressor in the refrigerator from overheating, they can be effective....
  • PTC starting relay: the PTC starter relay is a universal starter relay, applied in various brands of mini refrigerators and coolers.
  • Easy to install: the refrigerator start relays are durable, reliable and not easy to rust thanks to plastic and brass materials.
  • Wide applications: the 4.7 ohm 1-pin PTC start relays and 6750C-0005P refrigerator overload protectors are compatible with most mini refrigerators,....
Check Stock

HELLA H84709011 Mini\280\ Weatherproof Relay Connector Kit

  • Weatherproof Mini "280" relay connector kit..
  • Fits any automotive industry standard Mini "280" weatherproof relays regardless of manufacturer. Hella mating relays include 931410087, 931410082, 931410057, 931410917..
  • Kit includes plastic connector housing, external housing seal, (7) 6. 3 mm locking terminals, (6) various wire seals..
  • Package dimensions:5.91" (L) x 3.62" (W) x 1.94" (H).
Check Stock

Linear Ap-5 2 Gate/Door Wireless Access Controller Black

  • Multipurpose Wireless Access Controller For Gate Or Door.
  • 3 Relays access, Obstacle & Access/obstacle Configurable.
  • Super-heterodyne Receiver For Better Range & Sensitivity.
Check Stock