Top Rf Remote Control Receiver

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

12V 10A New Custom Wireless Remote Control Switch, 433MHz 1 Channel Remote Control Relay Momentary Switch of Learning Switch Use for Control Lamps/Access Control/Electric Doors etc.

  • ...e sensitivity. Resist Interference: It adopts non-directional wireless encoding technology, allowing independent control without mutual interference..
  • 【Long Range】The RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 164ft/50m with no obstacle..
  • 【Application scenarios】: This remote control switch widely used in a variety of equipment control.
  • such as LED lamps / courtyard lights control.
  • electric curtains and other intelligent control and security fields..
  • 【5 working modes】we send momentary mode default. There are 5 working modes: Momentary / Toggle / Delay 5 seconds / Delay 30 seconds / Delay 60 seconds. You can change the working mode through the learning button according to your own needs, the operation is very simple and convenient. It is a learning type remote control switch, it is easy to match the transmitter ..
  • 【Easy to Use 】We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it. as a seller of integrity, customer satisfaction is our lifelong pursuit....
Check Stock

2 Pack - DIRECTV RC66RX IR/RF Remote Control

  • Compatible in IR mode with most DirecTV receivers.
  • Built-in RF feature allows the remote to control the receiver without having to point it at the receiver.
  • Receivers with compatible RF include R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34 and C31.
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

LIFTMASTER Garage Door Opener 423LM Receiver 3 Channel Coaxial 390MHz by LiftMaster

  • This receiver can be used with a multi-function remote control (62LM, 63LM, 64LM, 82LM, 83LM, 33LM) to operate three residential garage door openers..
  • OR with a three button door control to OPEN, CLOSE, or STOP a commercial garage door opener. Use 33LM remote control for commercial open, close, and stop operation..
  • The receiver and antenna use TV Type F coaxial connectors. The antenna can be plugged directly into the receiver or mounted to a bracket and connected to the receiver with model 86LM coaxial cable kit (shown below) for extended range..
  • Specifications: Output Rating - 5 Amps 28VAC or DC Max.
  • If the power is other than shown in specifications, accessory transformer model 95LM is required..
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock

X-WLANG Upgraded Wireless Light Switch and Receiver kit, Remote Control Light Switch and Wireless Switch kit, No Wiring, Quickly Create Switch for Ceiling Lights, Fans, Lamps etc, White

  • ...eely and also won't affect the existing system.
  • ✅【Strong Signal and Safety 】- Strong RF signal works through walls and doors without any interference and Remote control halogen lamps, your bulbs, LED lights etc, Remote Control Range:100 Feet (Free Area), Pull out the Anttena which is black wire(17cm long) from Receiver box. Range is 150 feet ,Max output power: 1000W..
  • ✅【 Programmable and Expandable】- Remote control light switch, One Wireless receiver can hold up to More Remote Control Panels. And one Remote Control panel holds up to More Wireless Receivers . Ideal to control your garage ,garden shed and outside light comfortably.Switch and receiver have been pre-programmed for immediate use..
  • ✅【 Widely Used on Various Appliances】- Small receiver fits limited space like rose/canopy, electrical junction box, switch box. Widely Use in ceiling lights, indoor lighting fixtures, plug-in pendant, hard-to-reach lights, lamps and other electric appliances with wall switch etc. Working temperature Range: -25℃ ~+65 ℃..
  • ✅【Best Quality GUARANTEED003c/b003e】- 450,000 times for the receiver, 700,000 times for Switch Button .Self-tape provided for installation. RoHS, CQC,CE, FCC Certified.16-month warranty and friendly 24-hour customer servic....
Check Stock

DEWENWILS Remote Control Outlet, Wireless Light Switch with 2 Side Outlets, No Interference Remote Outlet Switch, No Wiring, 15A/1875W, 100 FT Range, Compact Design, Programmable

  • ...her metal surface, it can also used as a handheld remote control.
  • 【Wireless Wall Switch】 Remotely turn on/off indoor lighting fixtures, fans, chargers, lamps, hard-to-reach outlets, Christmas decorations, and other appliances with a push of a button.
  • wireless switch receiver kit can also be turned on and off manually.
  • 【100FT RF Wireless Remote Range】 Strong RF signal works through walls and doors without any interference.
  • does not require line of sight between the remote controller and outlet plug with the individual ON/OFF button.
  • 【Compact Size & 2 Side-Way Outlets】 User-friendly design makes the upper power socket not occupied.
  • smaller size than most of other indoor remote control sockets.
  • low profile 2 side-way outlets meet multi-device connection, meanwhile fit easily in tight spaces and behind furniture, fitting snug to wall so furniture can sit flush against wall.
  • 【Non-Interference】 Unique advanced technology eliminates self-interference or interference with other existing RF remote control system.
  • no need to worry about duplicate frequency problem or affecting your neighbors lights.
  • effortlessly control the household appliances from your home inside or ....
Check Stock

Suraielec Wireless Remote Light Switch, No Wiring, No WiFi, 100ft RF Range, Pre-Programmed, Expandable Wireless Wall Switch and Receiver Kit, Remote Control Light Fixture for Lamp, Ceiling Light, Fan

  • 【 Relocate or Add Wall Switches Anywhere without Wiring 】 Suraielec simple wireless light switch and receiver starter kit eliminate the wire from the light to the switch location.
  • no need to tear down a wall to gain access to the wires.
  • an easy and economical way to remote control all your lights and not affect the existing system.
  • no in-wall wiring or WiFi or replacing lighting fixtures needed.
  • 【 Simple Installation, Wall Switch Mounts Anywhere 】 Install the relay receiver simply by wiring it between the power and lamps.
  • small receiver fits easily in control boxes such as rose/canopy, electrical junction box, switch box, distribution box.
  • mounts the wall light switch anywhere with the included mounting bracket.
  • wireless switch can work as a portable remote which is particularly useful for the elderly or anyone with mobility challenges.
  • 【 Use Multiple Sets in a Room without Interference 】 This wireless light switch kits use rolling/dynamic codes.
  • allow you to install multiple separate kits in the same house to work independently.
  • this remote control kit has been pre-programmed for immediate use.
  • rated at 10A/1250W and works with almost all kinds of lamps and bulbs.
Check Stock

Ceiling Fan Remote Control Kit, Timing Wireless Remote Control

  • ...l and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage..
  • ☞Easy Install – Wireless remote controller kit for ceiling fan lamp Please check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan ,New technology make the ceiling fan remote controller kits to be more safe and long lifetime. Installation is very easy and fast, It is a nice looking remote and with rubber textured buttons that are easy to press and it comes with a holster you can mount to the wall..
  • ☞Multi-Functions- Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF.
  • 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H.
  • 1 button for light ON/OFF control (no dimming). NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.CE / ROHS Certification.
  • ☞Convenience and Fast- Set switch lights, wind speed adjustment, Timing, one key to complete, conv....
Check Stock

2 Pack Universal Ceiling Fan Remote Control Kits, Wireless Remote and Receiver Kits for Harbor Breeze Hunter Honeywell Hampton Bay Kichler Ceiling Fan lights, Fan Speeds Lamp ON/OFF and Timing Control

  • ...an remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light..
  • RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan lights in one room without interaction. There is a one-to-one correspondence between the remote control and the receiver.And no problem with signal, you can adjust the fan from another room, or even downstairs..
  • Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on. PLEASE CHECK THE DIMENSION OF RECEIVER CAREFULLY TO MAKE SURE THERE IS ENOUGH SPACE IN THE CANOPY OF YOUR FAN. AND PLEASE NOTE THAT THE RECEIVER DOES NOT HAVE THE FUNCTION OF REVERSE..
Check Stock