Top Rf Transceiver Module

sb components Bluetooth 4.0 NRF51822 Core Board Low Energy 2.4G Communication Receiver Module Multiprotocol RF Transceiver Development Kit

  • 2.4 GHz multi-protocol RF transceiver | ARM Cortex-M0 32 bit processor.
  • Low energy/2.4 GHz RF SoC designed for ULP (ultra low power) wirelesss applications..
  • Fully compatible with NRF24L series | Pinout compatible with NRF51xx series.
Check Stock

ACEIRMC 4pcs AT-09 Bluetooth 4.0 Transceiver BLE Module Serial Port CC2541 HM-10 MLT-BT05

  • The AT-09 is a module that contains a BLE chip (CC2541)..
  • This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with for iPhone/iPAD, IOS 6 or Android 4.3 above devices..
  • This module allows to perform serial communication with the BLE chip thanks to an Rx and a Tx pin..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
  • The module is also very similar to the HM-10 module and is also compatible with it so if you have some experience with the latter, you will get started quickly with the AT-09..
Check Stock

RF Coax to HDMI DVI Demodulator Analog TV Tuner for NTSC System

  • Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals. Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
  • Advanced RF coax TV demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920×1080 pixels..
  • Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. [Note]: This is an analog TV tuner so it can not be used for digital cable channels and can not accept antenna input..
  • Multiple tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time. Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater syst....
Check Stock

YONGNUO YN685EX-RF GN60 TTL Flash Speedlite for Sony Camera, HSS 1/8000S Master Slave Flash Unit, with bulit-in 2.4G Trigger System

  • 【High Guide Number, Supports TTL HSS】[email protected], 200mm. Supports TTL, M, Multi flash, with high-speed synchronization function, all shutters are available for shooting, the maximum shutter synchronization speed is up to 1/8000s..
  • 【Integrated transceiver and receiver, compatible with YONGNUO RF radio trigger system (RF602, RF603)】During radio transmission flashing shooting, it can be used as a master unit or slave unit. It is fully compatible with RF radio triggering signals from YN650EX-RF, YN685EX-RF, YN320EX, YN685(II), YN720, YN560 IV, YN660 and YN560 III, YN560-TX (pro), RF603, RF602 and YN32-TX. It also contains 16 transmission channels and 10000 wireless radio ID, making it easy for multi-flash lighting..
  • 【Supports Multi-group Flashes Independent Control】When YN685EX RF used as a radio master unit, it is able to control 5 independent groups, realizing remote control of flash mode, flash output and focal length for YN650EX-RF, YN685EX-RF, YN320EX, YN685(II), YN720, YN560 IV, YN660 and YN560 III..
  • 【Supports Optical Transmission Wireless Slave Flash】In optical transmission wireless flashing shooting, YN685EX-RF can be set as slave unit to receive optical transmission wireless triggering signals from YN320EX and from Sony flashe....
Check Stock

Happymodel ELRS 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver EP1 RX

  • The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released..
  • On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and....
  • Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop....
Check Stock

SunFounder Reader Module Kit Mifare RC522 Reader Module with S50 White Card and Key Ring Compatible with Arduino Raspberry Pi

  • The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, with pin header. The module can be directly loaded into the various reader molds..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • Module Interface: SPI， Data transfer rate: Maximum 10Mbit/s..
  • Power Voltage : 3.3V,Operating frequency: 13.56MHz..
Check Stock

Logarithmic Amplifier Module ±0.4 DB RSSI Linearity with Limiting Output Can Be Used As FSK PSK Demodulation

  • AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
  • APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
  • 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
  • ±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
  • Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
Check Stock

FrSky Tandem X20S Transmitter with Built-in 900M/2.5G Dual-Band Internal RF Module

  • Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4G ACCESSMode (Compatible with ACCESS Receivers) 900M ACCESSMode (Compatible with ACCESS R9 868/915MHz Receivers) (*Capable of simultaneous working under ACCESS mode) 2.4G & 900M TD Mode (Compatible with TD Receivers).
  • Super-low latency and long-range control with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency) 800*480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs.
  • Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System (Compatible with FreeLink App3.0) Built-in Audio Wireless Module (Compatible with Bluetooth Audio Device).
  • All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45° to 60° stcik travel and 8° rotatable panel. ETHOS: The more pow....
Check Stock

Logarithmic Amplifier Module ±0.4 DB RSSI Linearity ‑95 DBM Intercede, Sma Female Can Be Used As FSK PSK Demodulation

  • 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
  • APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
  • Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
  • ±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
  • AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
Check Stock

Dimplex 20\ Connex Proportional Linear Convector Baseboard Heater With Built-In Thermostat Model: PC2005W31), 240/208V, 500/375W White

  • New electronic proportioning thermostat, with CSA-C828 compliant control (+/-0.5oC/1oF), RF transceiver for on-board temperature control and heater-to-heater telegraphing.
  • Faster heating of the room than a conventional baseboard due to rapid vertical laminar air flow, directing heat to the ceiling, speeding dispersal of warm air into the center of the room.
  • Improved performance and reduced length through use of top heat discharge and new fin design.
  • Superior shark-fin blade design on a steel tubular element for improved heat transfer and longer life.
  • Discreet styling, reduced length and added versatility of placement provide more options when designing a room.
  • Full length automatic overheat reset for safety Optional wall mounted remote control for multi-heater temperature regulation.
  • Finish - specially-formulated epoxy/polyester powder coating is environmentally friendly and resists fading and abrasion.
  • Heating element - a nickel chromium element is totally enclosed within a steel sheath, providing superior life expectancy and resistance to rust, shark-fin shaped aluminum fins are firmly staked in an upright position to provide directional wicking for top discharge heat transfer.
  • Controls and wiring - supplied with an installed electronic proportioning therm....
Check Stock

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

UHF Connector Female Nut Bulkhead Panel Mount to SO239 Jack RF Coaxial Coax Cable Adapter Plug for PL-259 (Pack 4Pcs)

  • UHF female to UHF female Adapter 50Ω Impendence Straight RF Coaxial Coax adapter.
  • Copper material ensure higher signal transmission and connectivity. The attenuates signal of this uhf bulkhead connector is only 0.1dB and vswr< 1.15. Durability :≥ 1000 cycles..
  • UHF SO239 SO-239 PL259 international standard,.
  • Fit for RF Applications antennas,coaxial cables,radioscanner,ham radio transceiver, CB radio handheld & amateur radio devices.
  • Package include: 4 Pack PL259 Female to Female Adapter, Life time warranty.
Check Stock