Top Rifle Scope Rings
Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 1.00 inch Height
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
- Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
- Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockHatsan Hercules Bully .45 Cal Air Rifle with Scope 3-9x40 (w/Rings) and Wearable4U 30x .45 Cal Pellets and Hard Case and Bundle
- IN THE BOX: 1x Hatsan Hercules Bully .45 Caliber PCP Air Rifle with 3-9x40 Scope (with Rings).
- Genuine bullpup design, manual loading, side-lever action, pre-charged pneumatic (PCP) air rifle. QuietEnergy fully shrouded barrel and Integrated Sound Moderator – Approximately 50% Quieter..
- Precision rifled and choked barrel for accuracy. “EasyAdjust” Cheek Comb – Stock equipped with integrated elevation adjustment button. Long combination optics rail accepts both 11 mm and Picatinny scope mounts..
- 3-9x40 Scope with Rings included. Air rifle Hard case. The case is designed for the storage, safety and security of your Air rifle..
- Max Velocity: 850 fps. Shots At Optimal Velocity: 8. Max Energy: 290 ft/lbs..
Check StockFENTUK 1
- 2 Pack FENTUK Scope Ring Adaptors With Picatinny Rail- 1 Inch & 30mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability..
- Fit for 30mm & 25.4mm Scope Tube- Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30mm/1.18 inch to 25.4mm/I inch, effectively switch between two sizes, perfectly meeting your different needs!.
- 4 Slots Picatinny/Weaver Top Rails- Top 4 Slots 1.77" picatinny rail design, allowing you add on standard 21mm Picatinny or Weaver accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backup/second laser sights, optics and other accessories..
- High Quality Aluminum, Solid & Durable- Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy & durable, lightweight & compact construction, offer stable safe performance in the field. Item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs..
- Easy To Install & Remove- Our Scope Ring Barrel Mount is easy to install or remove ....
Check StockTXTactical Scope Leveling Tool, Scope Leveler, Scope Leveling Wedge
- ACCURACY: Ensure crosshairs are aligned for in line shot placement and reliable doping adjustments.
- EASE OF USE: Place the Scope Turret Level on the top scope cap and the Action Level above the bolt.
- once the levels show a level scope, simply tighten the rings down.
- VERSATILITY: Works with practically any bolt action rifle and can be adapted to work with other rifle designs.
- COMPACT: Small size allows for convenient storage and transport.
- INCLUDES: A magnetized Action Level and a non-magnetized Scope Turret Level.
Check StockOMMO 3-9X40 Rifle Scope, Red Green Illuminated Optical Mil-Dot Riflescope for Hunting, with Flip-Open Covers
- 3-9X40 RIFLE SCOPE RIFLE: OMMO rifle scope with green and red illuminations, 5-level brightness available, magnifications from 3X up to 9X, equipped with the superior eyepiece, rifle scopes long range provide you ultimate clarity.
- HIGH PERFORMANCE & RELIABILITY: The field of view of OMMO rifle scopes is14'-25',100 yards. The windage & elevation click value: 1/4 MOA 1/4" 100 yards, and with 2.7”-3.3” eye relief. Green and red mil-dot reticle provides outstanding accuracy for mid to long-range targets.
- WATERPROOF & FOG-PROOF: OMMO rifle scopes for hunting, with aviation-grade aluminum scope body, more impact resistant and light. the O-ring sealing and nitrogen filled reticle ensures outstanding water-proof and fog-proof performance.
- FULLY MULTI-COATED LENS: OMMO scopes for rifles, 40 mm object lens with HD performance multi-coated lenses, increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. (Fully multi-coated glass provides good light transmission than others).
- ADJUSTABLE DIOPTER& WITH WEAVER: OMMO 3x9x40 rifle scopes with locking diopter, provides fast, simple aiming points for various shot distances. The premium two 1’’ complementary scope rings to be easily mounted onto any 20mm Picatinny or Weaver mo....
Check StockMonstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black
- Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
- Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
- Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
- Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
- Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check StockMonstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black
- Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
- Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
- Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
- Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
- Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check StockMonstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes.
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
- Mounts to any flat top Picatinny rail equipped rifle.
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.
Check StockMonstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black
- Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes.
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
- Mounts to any flat top Picatinny rail equipped rifle.
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.
Check StockMonstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 34 mm Diameter | Black
- Dual ring scope mount for mounting standard 34 millimeter diameter tube rifle scopes.
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
- Mounts to any flat top Picatinny rail equipped rifle.
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.
Check StockSadlak Industries M14/M1A Gas Cylinder Wrench - Aluminum 1/2 Thick
- M1Surplus Optics Kit For Springfield M1A M14 Rifles !.
- Hi-Power 8-32x50 Rifle Scope With Tactical illuminated RANGE ESTIMATING Reticle.
- Low Profile Scope Mount Rail For M1A Rifle - "REQUIRES FITTING".
- Includes Tactical Black Stock Riser Cheek Rest, Sunshade, Flip-up Lens Covers And Aluminum Scope Rings.
Check StockMonstrum Rifle Scope Throw Lever | 46 mm Diameter | Standard
- Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
- Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
- Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
- Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
- All Monstrum scope accessories come with a lifetime guarantee..
Check Stock