Top Rigid Conduit Coupling Sets With Grounding Lug

Pfanstiehl Turntable Ground Wire for LP Vinyl Magnetic Cartridge Turntables 6-ft Long

  • No more hum - Eliminates hum and static electricity..
  • For magnetic cartridge turntables such as Technics..
  • Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier..
  • 6-ft wire has spade lugs on each end for easy installation..
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Sealproof 3/4-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 3/4\ Dia, 25 Feet

  • The product is manufactured in United States.
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
  • Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
  • For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.
Check Stock

Wall Mounted .125\ x 2\ x 6\ Copper Ground Bar Kit - Kit Includes Electrical Grease and 14 Bolts - TG18206RK

  • Provide the common grounding point within the Rack, Enclosure, or Cabinet.
  • Engineered to comply with US and International grounding requirements.
  • Kit includes: Ground Bar, 4 foot grounding cable with lug and ring leads, 2 mounting screws.
Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

Southwire - 59896940 Tools & Equipment FTSP45-125FML SIMPULL Fish Tape 4.5mm 125-Feet Flexible Metal Leader, Large Case

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • DOES NOT RUST.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 4mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 4mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 6mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 5mm to 6mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/8 inch to 5mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 1/8 inch to 5mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock