Top Rigid Imc Threaded Coupling

Frigidaire 18FFDHMH01 Dehumidifier Drain Hose 12 Foot Black

  • Drain hose continuously drains water from dehumidifier for uninterrupted use.
  • 12 foot hose length can be cut to fit your installation needs.
  • Universal 3/4" threaded garden hose style coupling allows easy installation.
  • Place washer inside coupling, screw hose coupling onto dehumidifier or collection pan, and place opposite hose end into drain.
  • Rubberized 12' drain hose is durable for peace of mind.
Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

3/4\ Pipe Fitting Coupling, Home TZH 10 Pack 3/4\ Malleable Iron Cast Pipe Coupling for Steam-punk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 3/4\)

  • HIGH QUALITY MATERIAL - This pipe coupling is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity and machinability. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use..
  • EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the coupling, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • WIDE APPLICATION - The small solid and strong pipe coupling could be used for any shelf installation, such as bookshelf, garden shelf, table and chair corner. It can play a good role regardless of its small size, and make your home or garden look more beautiful..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our corner braces and we promise that you will not be disappointed..
Check Stock

3/4\ Pipe Fitting Coupling, Home TZH 20 Pack 3/4\ Malleable Iron Cast Pipe Coupling for Steam-punk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 3/4\)

  • HIGH QUALITY MATERIAL - This pipe coupling is mainly composed of iron, carbon and silicon alloy composition, with high strength, good toughness, plasticity and machinability. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use..
  • EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the coupling, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • WIDE APPLICATION - The small solid and strong pipe coupling could be used for any shelf installation, such as bookshelf, garden shelf, table and chair corner. It can play a good role regardless of its small size, and make your home or garden look more beautiful..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our corner braces and we promise that you will not be disappointed..
Check Stock

Joint Coupling Metal Shaft Coupling Motor Connector - 0.5in×0.9in×2in

  • CONNECT RIGID RODS-This joint or coupling connects rigid rods whose axes are inclined to each other..
  • DURABLE-The universal joint is made of premium metal material, which is durable and has a long service life..
  • COMMON USE-The shaft joint is commonly used for shafts that transmit rotary motion..
  • BLACK-Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
  • WIDE APPLICATION-The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..
Check Stock

Universal Joint Coupling Metal Shaft Coupling Motor Connector (0.5in×0.9in×2in)

  • 【CONNECT RIGID RODS】This joint or coupling connects rigid rods whose axes are inclined to each other..
  • 【DURABLE】The universal joint is made of premium metal material, which is durable and has a long service life..
  • 【COMMON USE】The shaft joint is commonly used for shafts that transmit rotary motion..
  • 【BLACK】Our universal coupling is black and has simple appearance, which is not only practical but also beautiful..
  • 【WIDE APPLICATION】The U-joint motor connector is widely used for connecting model cars, model ships, robots, etc..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 4mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 4mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 6mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 5mm to 6mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock