Top Rigid Pipe Extrusion Line

Morris 19425 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 3/4\ (Pack of 50)

✔️ ELIMINATES HEAT CREEP – The bimetallic heat break conducts 85% less heat than a standard threaded heat break!.
✔️ 500°C TEMPERATURE RATING – With a temperature rating this high, our Mosquito Hotend will allow you to print virtually any available....
✔️ ONE-HANDED NOZZLE CHANGE - The rigid structure allows for the simplest nozzle procedure of any hotend on the market..
✔️ MODULAR AND ADAPTABLE – Fits almost any FFF/FDM 3D printer with widely available adapters..
✔️ IDEAL FOR MULTI-EXTRUSION SYSTEMS – The Mosquito Hotend’s tiny form factor and low mass (41 g) makes it ideal for multi-extrusion systems..

【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
Note: Mounting screws are not included here.

Designed for rapid cutting of 6-Inch through 8-Inch steel pipe, heavy-wall steel pipe and cast-iron pipe.
Operates with minimal cutter rotation as necessary for tight quarters.
Clean cut with limited crimping or bending.

Rigid aluminum I-beam construction is rigid and durable.
Leveler has rotating dial vial to make it easier to find the angle you are looking for quickly.
V-groove edge for leveling pipe, making the job easier and quicker.
large handle for easy gripping and holding with or without gloves.

Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
Features: The mould steel spring is very rigid, strong in pressure and very durable..
Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..

INSTALLATION TIPS - Plunger rod length is 6" / 15.5 cm, only rod is pulled up to the end, can it be locked. After inserting cartridge grease into the barrel, tighten grease gun head counterclockwise, and then press the tab to retract plunger rod..
VARIOUS COLLOCATION - The set comes with a 12'' flexible hose, a 5'' rigid pipe and a 3'' rigid pipe which can be used for different collocation to meet your different needs..
LEAK-PROOF DESIGN - Compared with other grease guns,our product is equipped with thicker thread design to prevent leakage. And the unique knurling on barrel is specially designed for enhanced non-slip grip..
THREE WAYS LOADING - Adaptable to three different filling methods: 3oz cartridge, bulk loading (suction), and filler pump loading..
REINFORCED CONSTRUCTION - Made from chrome plated steel, the grease gun can stand up to 3000 PSI pressure with reinforced barrel, heavy duty plunger rod for high durability and long service life..

One easy revolution of the DEB4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.
Creates a smooth pipe end so solvent spreads evenly as pipe is joined.
Reversible, sharpenable, hardened steel blade for two cutting edges.
Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch.

Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).

WIDESHERE creates a large "sweet spot" for all listeners, even from the smallest speakers.
Aluminum dome tweeters deliver high output, extended frequency response & natural music reproduction.
Butyl rubber surrounds provide durability & deeper mid-bass impact.
Textured ABS gasket assures a rigid linear seal to the mounting surface.
Pure copper voice coil creates a strong magnetic field with a very thin extrusion.

Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..