Top Rigid Steel Conduit

M40 1 1/2 Inch Stainless Steel Rigid Pipe Hole Strap,with 2 Holes Cable U Bracket Clamp Hanger，Heavy Duty Rigid Pipe Strap Clamp 30 PCS

  • 【Material】Made of 304 stainless steel. After punching, bending, and integral molding, the reinforcing rib structure is added to improve the....
  • 【Secure Conduit】Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for....
  • 【Reinforcing Rib Design】The middle part is prominent, larger load bearing, to make pipe strap not easily to deformed during using..
  • 【Application】Pipe clamps use to secure rigid or IMC conduit to wood, masonry, widely used in fixed pipeline such as stainless steel pipes, rubber....
  • 【Easy to Install】 Two Holes u bracket easily secure piping to studs or joists to reduce vibration noise, great improves its safety.
Check Stock

Southwire FTSP45-125NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, Two Leader Options, Spiral Extruded Polymer, Extremely Flexible, 4.5mm x 125 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded..
Check Stock

Thomas & Betts 12008100 1' BLUE ENT 100' COIL

  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT.
  • One piece ENT coupling, threaded terminator and rigid non-metallic conduit fittings are rated concrete tight without tape.
  • Flex-Plus Blue ENT is a non-metallic flexible raceway for use in walls, floors, and non-plenum ceilings.
  • Lightweight, hand bendable, and free from sharp edges which reduces installation time and saves money.
Check Stock

Sealproof 3/4-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 3/4\ Dia, 25 Feet

  • The product is manufactured in United States.
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
  • Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
  • For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.
Check Stock

Klein Tools D333-8 Conduit Locknut and Reaming Pliers

  • Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
  • Reams and smoothes both inside and outside of conduit.
  • Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
  • Forged in the USA with custom, US-made tool steel for maximum durability.
Check Stock

(1 1/4\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling.
  • Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • Integral Rigid and Flexible PVC Construction, UL Rating 140 degrees F.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Check Stock

Morris 19426 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 1\ (Pack of 25)

  • Overall Size: 155x 30 x 80mm/ 6.10" x 1.18" x 3.15"(L*W*H).
  • Special slotted design makes it more sturdy and not easy to deform.
  • Made from 304 premium stainless steel material. Anti rust, anti-corrosion. Clamps are sturdy, strong and reliable.
  • The surface is super smooth and burr-free with the fine workmanship.
  • Use to secure rigid or IMC conduit to wood, masonry, widely used in stainless steel pipes, rubber hoses.
Check Stock

Antrader M25/1Inch 304 Stainless Steel 2-Hole Pipe Strap Tension Tube Clamp Pack of 16

  • 304 stainless steel 2-Hole Pipe Strap accommodates 1 Inch pipe and has 2 holes to secure it in place..
  • Used to secure rigid conduit to wood, masonry or similar surfaces..
  • These durable galvanized straps will secure piping to studs or joists to reduce vibration noise..
  • Easy to mount by screws, but mounting screws are not included..
Check Stock

Gardner Bender B2000 Cyclone Electric Powered Bender, ½ - 2 in. EMT, Rigid, Rigid Aluminum & IMC Conduit, & ½ - 1½ in. PVC-Coated Conduit, No Shoe Group, Red & Black

  • EMT & IMC CONDUIT with a SINGLE SHOE. BENDS in both HORIZONTAL & VERTICAL positions. Hook attachement on dial FREES HANDS WHILE WORKING WITH CONDUIT..
  • EASY DIAL settings and CAST-IN-PLACE DEGREE MARKS CREATE ACCURATE BENDS every time. Quickly CREATES REPEATED BENDS at the same degree..
  • CONSTRUCTED OF RUGGED MALLEABLE IRON for strength and durability.
  • and with STRONG LEGS to offer increased jobsite durability (10x life test). Large tires/wheels - increase mobility..
  • LIFT HOOK FOR SECURITY (job-site) tethering and EASILY LIFT & TRANSPORT using the forklift tubes built into base.
  • WEATHER RESISTANT COVER is included. Incorporates STORAGE AREA FOR TOOLS while in use. RESETTING CIRCUIT BREAKER ELIMINATES DOWN TIME changing fuses.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Snowpiercer: The Complete First Season S1 (DVD)

  • 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
  • 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
  • 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
  • Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
  • 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock

Gardner Bender - GIDDS-823107 931B Aluminum Conduit Hand Bender Tool, Bends ¾ Inch EMT & ½ Inch Rigid Aluminum Conduit, 6 Inch Bending Radius, Acrylic Level Gauge, Embossed Sight Line Angles, Fits BH-75 Handle Aluminum

  • Vise-Mate holds conduit while cutting or reaming.
  • Built-in acrylic level gauge helps make precise bends in half the time.
  • industry-standard markings - 30° bend when handle is straight up.
  • Embossed sight lines for 10°, 22°, 30°, 45°, 60° & 90°.
  • Bends ¾ Inch EMT, and ½ Inch to 1 Inch Rigid Aluminum Conduit.
Check Stock