Top Rim Blade

4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles…

  • Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you..
  • Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal..
  • Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
Check Stock

Kingthai 7 Inch Concrete Turbo Rim Diamond Blade for Masonry Stone, 7/8\-5/8\ Arbor

  • Arbor: 7/8"-5/8" bushing, Rim height .395"(10mm). Size is 7"x.100"x.395"/10mm..
  • Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: Turbo continuous rim diamond blade with faster & smoother cutting of hard building materials..
  • Designed for: Brick, block, concrete, masonry and stone etc..
  • Applicable models: Angle grinder, Hand-held power saw, Stone saw, etc..
Check Stock

Kingthai 12 Inch Turbo Continuous Rim Concrete Diamond Saw Blade with 1\Arbor for Masonry Stone

  • Rim height .395"(10mm). Arbor：1". Size is 12"x.110"x.395"/10mm.
  • Hot-pressed sintered blade: The grain of diamond will not become larger, the density is high and the mechanical property is good. There is no need to add sintering aids or forming aids, so the purity is high..
  • Main features: Turbo continuous rim diamond blade with faster & smoother cutting of hard building materials..
  • Designed for: Brick, block, concrete, masonry and stone etc..
  • Applicable models: Angle grinder, Hand-held power saw, Stone saw, etc..
Check Stock

Makita X-Lock 4-1/2 inches Continuous Rim Diamond Blade For Ceramic And Granite Cutting

  • For use with Makita X-LOCK Angle Grinder models XAG25, XAG26, GA4570 and angle grinders with a 7/8 inches arbor.
  • Up to 4x longer life than competitive blades.
  • X-LOCK quick change system provides up to 5X faster blade changes vs. standard angle grinder mount.
  • X-LOCK quick change system allows for easy tool-free blade changes by simply pulling the release lever on the X-LOCK grinder.
  • Continuous rim contact with material delivers a finer finish than segmented or turbo rim blades.
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

GoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)

  • 【Excellent Tile Blade】: The 7” tile saw blade is made of extended performance diamond matrix, which is fairly durable long lasting. Size:180 x 10 x 1.2 x 22.23mm, Thickness: 1.4mm, Outer Diameter: 180mm (7 inch), with 7/8" or 5/8" Arbor, Max speed 13200 RPM. 80m/s. Its great at cutting tile and stone without chipping the finished surface..
  • 【Precise and Clean Cuts】: Our 7” diamond saw blade has a strong core it’s slightly thicker than other blades to have a fine cut and almost no chip-out. Moreover, This little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
  • 【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm P....
Check Stock

MANTISHARP General Purpose Continuous Rim Diamond Blade,4-1/2 inch ,for Angle Grinders & Tile Saws ,Porcelain, Ceramic, Slate, and Other Masonry. 5/8”, 20mm & 7/8” Arbors, MGP-F4501. (1 PC)

  • All-Purpose Diamond Saw Blade – Offering multipurpose applications this 4 ½ inch diamond blade can be used for cutting all types of masonry materials including Porcelain, Ceramic and Slate for both indoor and outdoor construction jobs..
  • Premium Diamond Grit – MANTISHARP 4 ½ diamond blade for angler grinders and tile saws use larger diamond grits for a higher-density abrasiveness to cut through materials faster, more safely, and with increased efficiency..
  • Direct High-Heat Press Sintering – Superior to standard heat or cold press diamond cutting blades ours was built using direct high-heat which improved temperature performance for cut efficiency, extended life, and longer working periods..
  • Stronger Brass Adapter – This diamond cutting blade uses a brass adapter over nickel plate which is thicker and offers a more reliable hold thanks to a 5/8” fit and 20mm arbor. This means a tighter fit with no vibration on handheld machines..
  • Super Thin Rim – Our diamond tile saw blade with #65Mn steel core is heat-treated to withstand wet or dry cutting and boasts a 1.8mm rim for sharper, faster cutting and a thinner kerf to provide more precision cuts with consistency..
Check Stock

SHDIATOOL Diamond Saw Blades Cutting Discs Set Segmented Cutter Wheel for Tile Ceramic Porcelain Marble 7/8\ or 5/8\ arbor 6 Pieces 4-1/2 Inch

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8"),sutiable for angle grinder.
  • Blades Kit contains: continuous tile blade/segmented concrete disc/turbo rim granite saw bladeper 2 pieces.
  • 2 pieces continuous rim wheel For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 2 pieces segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 2 pieces turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

5Pcs/Lot 4.5\ Super Thin Diamond Porcelain Saw Blade for Cutting Ceramic or Porcelain Tiles (4.5\-5pcs)…

  • Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you..
  • Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal..
  • Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
Check Stock

IVY Classic 38184 Diamond Plus 6-Inch Wet Tile Cutting Continuous Rim Diamond Blade with 5/8-Inch Arbor, 1/Card

  • Designed for precise, smooth cutting of ceramic, marble, slate and granite tile.
  • Diamond Plus Blades - a highly reliable blade at a lower price for small to medium cutting jobs.
  • State of the art automated manufacturing technology.
  • Arbor: 5/8-inch, Rim Width: 2.2mm, Rim Height: 5.5mm, Max RPM: 10,000.
Check Stock

DEWALT DW4766 7-Inch by .060-Inch Porclean Tile Blade Wet

  • Extended performance diamond matrix provides long life and enhanced material cutting.
  • Continuous rim design provides chip free cutting in all types of tile.
  • XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting.
  • XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up.
  • Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades.
Check Stock

ICAN 50mm 700C Carbon Wheels Road Bike Clincher Rim Brake Only 1510g Classic Wheelset

  • ICAN 50mm depth 23mm wide carbon rim , fit for 700x23c and 700x25c tire,best all around rim with a balance of lightweight climbing ability,....
  • ICAN standard hub 6 pawls hub - 48 point of engagement with aero blade spokes.
  • Weight:1510+-20g (670+-10g / 840+-10g) , rider weight limit: 105kg.
  • Cassette body: fit for Shiman0 or Sram 10/11 speed cassette.
  • Package included: 1 x wheelset , 1 x skewer , 2 x brake pads , 1 x rim tape.
Check Stock