Top Rms 5 10 20

MUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier

  • 4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
  • Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....
Check Stock

MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit

  • Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
  • Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
  • Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

KICKER Pair 42PSC654 PSC65 6.5" 240 Watt Motorcycle/ATV/UTV/RZR Marine Speakers

  • Features: Pair Kicker 40PSC654 PSC65 6.5" 240w Motorcycle/ATV/Marine Speakers. Woofer: 6-1/2 in..
  • Power Handling Per Speaker: .120 Watts Peak .60 Watts RMS. Recommended power range: 10 - 60 watts RMS per channel. Fit Harley-Davidson and Victory motorcycles.
  • 3/4" Neo-titanium bridge-mounted Dome tweeters. Neodymium Magnet. Sensitivity: 92.5 (dB 1w/1m). Frequency Response: 40 Hz - 20 kHz. Mounting Depth: 2 in..
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock

Seismic Audio - SA-IOHS5W - Pair of 5.25 Inch 2-Way Indoor/Outdoor Speakers - 320 Watts White

  • Model: SA-IOHS5W | Pair of White 5.25 Inch 2-Way Indoor/Outdoor Speakers.
  • 320 Watts Peak per pair | Woofer: Each Cabinet is equipped with a 5.25 Inch Woofer | 10 oz Magnet.
  • 1/2 Inch High Compliance Polymer Tweeter | Frequency Response: 60Hz - 20kHz | Impedance: 8 Ohms | Sensitivity: 90dB.
  • Operational in Impedance 8 Ohm, 16 Ohm, 32 Ohm, 64 Ohm and 128 Ohm | Transformer: 2W/4W/8W/16W and 8 Ohms.
  • Quick Connect Speaker Terminals | Heavy Duty ABS Construction with UV Coating | Dimensions: 9.8" x 7" x 5.7" each | Weight: 4.38 lbs each | 8.76 lbs per pair.
Check Stock

Seismic Audio - SA-MA8C - 8 Channel 400 Watt Powered PA Head Mixer with Bluetooth and Effects

  • Model: SA-MA8C | 8 Channel Powered PA Head Mixer with Bluetooth.
  • Power Rating: 200 Watts RMS at 8 ohm | 400 Watts RMS at 4 ohm | Built-In Bluetooth | USD | SD | Reverb.
  • Controls: Volume, Bass, Treble & Effects on each Channel | Master Volume Controls | 5 Band EQ for Master Channel | CD/TAPE Volume Control.
  • Inputs: 8 -1/4 Inch TRS | 8 XLR | RCA L/R Input | Outputs: RCA L/R Output | 4 Ohm Dual 1/4 Inch Speaker Outputs.
  • Class AB Amplifier with Built-In Cooling Fan | Dimensions: 20.66" x 10.75" x 10" | Weight: 18.8 lbs.
Check Stock

Rockville BLUAMP 150 Home Stereo Bluetooth Amplifier Receiver Optical/Phono/RCA

  • Rockville BLUAMP-150 2-Channel Home Stereo Bluetooth Amplifier..
  • 4 Ohms: 75 x 2 watts RMS and 300 x 2 watts peak. 8 Ohms: 40 x 2 watts RMS and 160 x 2 watts peak. Plays Bluetooth/USB/SD. RCA aux input. Phono RCA input for turntables. Optical input. (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control..
  • (2) sets of RCA Audio Outputs to connect to a subwoofer or another amplifier. Built in Bluetooth 5.0 with 33 foot range. 2 sets of binding post speaker output terminals. Bass/Treble/Balance/Mic Volume/Mic Echo and Master Volume controls..
  • Built-in Cooling Fan. Built-in Pre-Amplifier with low distortion. Class D circuit with great sound quality. Solid metal construction with brushed aluminum front panel. Multi function volume knob . LCD Display / Touch Buttons. Frequency Response (±3dB): 50 Hz- 20 KHz..
  • AUX Input Impedance: 10k Ohms. AUX Input Sensitivity: 300mV. Phono input impedance: 47K. Phono input sensitivity: 20mV. Output Impedance: 4-8 ohm. Total Harmonic Distortion(THD): ≤0.5%. Signal-to-Noise Ratio(S/N): ≥78dBA. USB: Supports WAV/MP3/WMA. 110-220....
Check Stock

MX10IB3-SG-WH - JL Audio 10\ 175W RMS MX Series Infinite Baffle Marine Subwoofer Driver with White Sports Grille

  • Package Includes: (1) KICKER 45KMF104 10" 350w Peak/175w RMS Marine Boat Subwoofer Free Air Sub KMF12. (1) KICKER 45KMG10C 10" Charcoal Grille w/LED For KM10 + KMF10 Subwoofer Subs KMG10C. (1) Kicker 41KMLC KMLC LED Light Controller for KM Series Speakers and Subs New. What's In The Box: (1) 10" Woofer. (1) Back Gasket. (8) Mounting Screws. (8) Mounting Screw Clips. (1) Owner's Manual. Features:.
  • KICKER 45KMF104 10" 350W Peak/175W RMS Marine Subwoofer. Peak Power Handling: 350 Watts. RMS Power Handling: 175 Watts. Four-Ohm Voice Coil. Injection-Molded Polypropylene Cone. Co-molded Santoprene Surround. UniPlate Back Plate And Pole Piece. Thick Tinsel Leads. Large Ceramic Magnet. Rear Gasketing Included. Polymer Basket Resists Corrosion. Protective Terminal Cap.
  • Stainless Mounting Hardware Included. Meets or Exceeds ASTM Standards forSun light Protectedand Salt/Fog Exposure. Impedance: 4 Ohms. Frequency Response: 30 Hz - 500 Hz. Mounting Depth: 5" inches. Hole Diameter: 9.19" inches. Outer Diameter: 10.69" inches. What's In The Box: (1) 10" Charcoal Subwoofer Grille. (1) Owner's Manual. Features: KICKER 45KMG10C 10" Charcoal Grille w/LED For KM10 + KMF10 Subwoofer.
  • Made of thick ABS Plastic. Charcoal Color. Optional LED Remote. Silicone-Coated LED Lights.....
Check Stock

Dire Straits

  • Features of BluTube WD Rockville BluTube WD Audiophile grade tube amplifier with Bluetooth Color 2-Tone silver with wood accent 25 watts x 2 RMS @ 8 ohm 35 watts x 2 RMS @ 4 ohm (1) set of RCA inputs to connect to any audio device like a TV Laptop or MP3 player etc.
  • Optical input Coaxial input Sub output Tube amps do not hard-clip even at high volumes and are extremely efficient Due to this the amp sounds more like double the rated power!.
  • Built in Bluetooth with 33 foot range Built-in Preamplifier Headphone output VU meter Adjustable bass and treble (2 band equalizer) USB input for music files from USB thumb drive.
  • Rear Speaker Terminals Banana plug / binding post outputs for 2 speakers Frequency Response ( 3dB) 22Hz-20kHz Input Impedance 47kO Input Sensitivity 300mV Output Impendence 4-8ohm Total Harmonic Distortion(THD) ≤0 02%.
  • Signal-to-Noise Ratio(S/N) ≥86dB Bluetooth 2 1+EDR USB Supports WAV/MP3/WMA/APE/FLAC. Unit weight 6 6 lbs Unit dimension 10 6″ x 10 2″ x 5 1″.
Check Stock

Memphis Audio PRXA1500.1 Monoblock 1500W RMS Power Reference Series Amplifier

  • Features: Monoblock Amplifier. Power Handling: RMS Power 4-Ohm: 700W x 1, RMS Power 2-Ohm: 1000W x 1, RMS Power 1-Ohm: 1500W x 1. Diecast aluminum heatsink, Signal sensing auto turn on, Hidden top mounted control panel, 12dB/octave Butterworth crossover, 1Ω stable (MONO Amps), Short circuit protection, Remote bass knob, Input select switch (4/5 channel models), THD% 4Ω: .
Check Stock