Top Rock Drill Bit

Utoolmart Masonry Drill Bit 25mm x 200mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for SDS Impact Drill 1Pcs

  • 【Dimension】- Cutting diameter: 25mm / 0.98-inch.
  • 【Carbide Tip】- Carbide-tipped drill bit head is harder and tougher to extreme loads. 4-flute design for fast dust removal..
  • 【Flute Design】- Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • 【Centric Tip】- Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank..
  • 【Wide Use】- Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, Concrete & Block, 7-Piece (DW5207)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Four-flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
  • For use with electric or cordless hammerdrills.
  • Ideal for drilling holes in brick, block, concrete, and masonry.
Check Stock

uxcell Masonry Drill Bit 18mm x 350mm Carbide Tipped Rotary Hammer Bit 9mm Spuare Shank for SDS X4 Impact Drill

  • Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 4-flute design for fast dust removal.
  • Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank.
  • Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock

uxcell Masonry Drill Bit 16mm x 160mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for SDS X4 Impact Drill

  • Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 2-flute design for fast dust removal.
  • Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank.
  • Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock

uxcell Masonry Drill Bit 16mm x 200mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for SDS X4 Impact Drill

  • Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 4-flute design for fast dust removal.
  • Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank.
  • Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock

ERYTLLY Bulb Planter, Auger Spiral, Garden Planter Tool 3 x 17.5 inch,Rapid Umbrella Hole Digger for Planting Bulb Seedlings Bedding Tulips, and Digging Weeds Roots

  • VARIOUS APPLICATIONS OF POST HOLE DIGGER: This auger spiral hole drill is the professional landscapers’ choice for dramatically increased efficiency when plant hole digger planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, paint, or batches of mortar mix. Simplify drilling tasks such as digging weeds roots, taking soil samples, boring plant holes or erecting fences.
  • BUILT TO LAST BULB PLANTER: Dimensions of garden auger 5/8-inch (1.6 cm) steel shaft with non-slip hex drive.
  • 3-inch (7.6cm) diameter x 17.5-inch (61cm) length.
  • Durable 10-gauge flighting on a heavy duty 5/8-inch steel shaft with durable black powder coated.
  • EASY TO USE BULB PLANTER TOOL: Use a 5/8-inch or bulb planter tool on low (slow) speed, drill into soil or applicable landscape straight down 17.5 inches, and lift out of hole.
  • For cordless drills a 14V drill minimum is recommended.
  • Keep auger clean from soil and debris when not in use.
  • MACHINED POINT KEEPS IT STEADY：The Point on auger drill bit hits the ground first and keeps it steady when you are digging hard grounds. Bulb auger is also a minimal distance between the digging blade start and the point, so auger drill bit....
Check Stock

【 New type】Mgtgbao Concrete Drill Bit Set, 10pcs Masonry Drill Bits Set Carbide Tip for Glass, Brick, Tile, Concrete, Plastic and Wood with size 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm).

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Three flats on shank eliminate bit slipping in chuck.
  • Innovative tip reduces walking and increases accuracy.
  • Used primarily to drill holes for mechanical anchors, fits standard 3/8-inch and 1/2-inch chucks.
Check Stock

Stone Splitting Hand Tools Kit, 6 pcs Stone Splitters, 200mm SDS Plus Rotary Hammer Drill Bit, 5/7''(18mm) Plug Wedges Feather Shims Tools for Granite Rock Concrete Marble Splitting

  • The drill bit is with 4-flute design and SDS plus shank..
  • Widely used to split the hard stone, rock, Granite, concrete, etc.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Dry Type 2″ Diamond Dry Coring Bit – Concrete Core Drill by BLUEROCK Tools

  • 2″ Dry Type Diamond Core Bit BLUEROCK Tools Brand.
  • 2” Outside Diameter, Overall Length: 11″ Approximate, Inside Barrel Depth: 10″ or 255mm.
  • For concrete, asphalt, brick, stone, rock and tile masonry.
  • Ventilated and ribbed for efficient dry core drilling.
  • Our BLUEROCK brand core drills have a 1 1/4″ spindle. Please see the 1 1/4” to 5/8” adapter if using this bit with our core drill.  .
  • Rotary use only. Do not use a hammer action..
  • See our other listings for Dry Core Bit Sets and Z1 Core Drills.
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock