Top Rockler Coping Jig

Rockler Router Bit Set Up Jigs for 45 Degree Lock Miter Bits – Jig Works for 3/4” Stock on One Side & 5/8” on Other – High-Quality HDPE Miter Router Bit - Lock Miter Router Bit Measure 2' x 3-7/8' x 3/4'

  • Set Up for 45° Miter Lock Router Bit: The Rockler router bit set up jig helps to set your miter lock bit to the precise height every time for accurate lock miter joints!.
  • Designed To Work With: This router jig works for 3/4" stock on one side and 5/8" stock on the other..
  • High-Quality Material: Our lock miter router bit jig is made of durable HDPE and this lock miter bit measures 2" x 3-7/8" x 3/4"..
  • Save Your Time: Quickly and easily save your time for creating a 45° lock miter joint jig. Precisely Machined Setup aid and no test cuts required. This woodworking jig helps to adjust a bit. Make life easier!!.
  • Keep Hands Clear Of Bit: Use these jig woodworking tools only in a table-mounted router at a lower speed. Do not bottom out a bit in your router collet. Allow at least a 1/8" gap between the bottom of the bit shank and bottom of router collet. Keep your hands clear of bit..
Check Stock

General Tools Crown King Molding Cutting Jig #881 with Protractor

  • 4 EASY STEPS: Perfectly mitered corner joints in four easy steps..
  • ELIMINATE TRIAL AND ERROR: Makes accurately cutting crown molding a snap, eliminating trial and error and saving time and money..
  • PROFESSIONAL GRADE JOINTS: Cut perfectly mitered interior and exterior corner joints..
  • MULTIPLE ANGLES: 45° spring angle crown molding jig with adapter for 52° and 38° angles..
  • ELIMINATES: Difficult angle calculations, coping of joints or compound-angle cutting..
Check Stock

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

  • This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
  • This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
  • Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
  • Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
  • These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Check Stock

JET J-41002, 2\ x 42\ Belt and 8\ Disc Sander, 1Ph 115V (577004)

  • DELUXE MITER GAUGE: Turns and locks for common angles, 45 degrees both left and right.
  • HEAVY-DUTY: Has a steel base, rubber feet, and cast iron construction.
  • REMOVABLE PLATEN: Allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt.
  • THREE-IN-ONE: Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing.
  • EASY ADJUSTMENTS: Allows an operator to get into small openings, plus handle odd shapes and angles.
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • ...n the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..
  • The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order..
Check Stock

uxcell M4 Hanger Bolts Length 1\(25mm) Double Headed Bolts Self-Tapping Screw 4mm Wood Joint Furniture Legs 20pcs

  • All Rockler products come in Rockler branded packaging for quality and safe transport.
Check Stock

IRWIN Tools Coping Saw Blades, Coarse, 3-pack (2014500)

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 17 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

Rockler Safety Power Tool Switch - Heavy-duty 15 Amp Power Switch - Stop Paddle to Quickly Shut off Power - Safety Switch for Router Tables or Workbench - Router Table Accessories

  • Rockler Router Table Switch: Just bump the "Stop Paddle" on/off switch, which is easy to find when you're in a tight spot, to quickly shut off power.....
  • “Stop Paddle” Table Saw Switch: This Rockler power tool switch mounts to Rockler steel shop stands or any other surface with screws. No more....
  • Hands-Free: This power tool safety switch helps you keep your hands on your work piece and not removing to hit a power off button. This stop button....
  • Easy To Locate: Locate our router switch near your hip or knee and you'll never have to take your hands off the work piece. The Rockler router....
  • Easy To Install: Several minutes tops that's all it takes. The start and stop router power switch is installed with the help of screws and can be....
Check Stock

Rockler 24 Aluminum Miter Bar - Aluminum Bar for Smooth-Sliding Action on Table Saws Router Tables Workbenches & More – For any Standard 3/4 x 3/8 Miter Slot – Accessories for Table Saw

  • 24" Aluminum Miter Bar: The Rockler miter track bar allows you to set up your jigs for smooth-sliding action on table saws, router tables, bandsaws,....
  • Adjustment Screws: This solid aluminum miter bar has nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x....
  • Great For? Our miter slider bar is great for shop-made crosscut jigs, cutoff tables, taper jigs, and more. Available individually in 18", 24", and 36"....
  • Easy Assemble: Our miter bar slider makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. This....
  • Extremely Durable: Our miter bars for the table saw are made of high-quality aluminum alloy that will be strong and reliable for several years..
Check Stock

FOXBC Coping Saw Blades 6-1/2 Inch, 18 Pack ( 15 TPI, 18 TPI, 24 TPI)

  • 15 TPI (6-Pack), 18TPI (6-Pack),18TPI (6-Pack).
  • Coping Saw Blade Used For Cutting Wood, Plastic, Bone, Leather, Rubber And Thin Mild Metals ..
  • 6-1/2 Coping Saw Blades fits Fret, Scroll, Jewelers and Coping Saw Blades & Frame Saw..
Check Stock

7 in Quick Release Workbench Vise

  • Rockler F-Style Clamp Rack: A compact solution to a sprawling problem! This wood working clamp rack from Rockler herds your F-clamps together & mounts them firmly to the wall or to the Pack-Rack (sold separately), so your clamps are where you need them, when you need them..
  • Perfect For Storage: The customary way of storing F style clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
  • Workshop Organization: With the Rockler F-bar clamp rack, you can say goodbye to untangling clamps! This garage tool clamp rack measures .30” wide..
  • Secure Hold: These racks are heavy-duty and hold F-clamps for woodworking securely. The clamps will not fall off even if bumped. The installation of this rack tool holder for the garage wall is pretty easy, you just require lag bolts..
  • High Quality:This woodworking clamp rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 30'' wide. The footprint is very compact, saving you both wall space and floor space..
Check Stock

Coping Kit | 1¼ Inch by 8 Foot Sections | 8 Pieces | for use with Kayak Pools | for 12 Foot by 20 Foot Pool

  • REPLACE - This replacement vinyl coping is used to replace cracked and yellowed coping, for use with Kayak Pools manufactured between 1977 and 2002..
  • PURELY COSMETIC – This coping is just superficial as it does not actually hold up the liner..
  • SNAP INTO PLACE – The pool liner snaps into the top channel while the coping snaps onto the top channel..
  • SIZE – The Coping New Style is measured at 1¼ inches by 8 feet sections..
  • INCLUDED –This kit comes with enough 8' lengths of coping and the 4 corner caps for use with your 12' x 20' Kayak Pools..
Check Stock