Top Rode Go Mic 2

2-Pack Lavalier Lapel Microphone Compatible with Rode Wireless GO 2 / II & DJI Mic Bodypack Transmitters - Omnidirectional Lav Wearable Mic for Vlog Interview Streaming Lectures Broadcasters

  • Specially compatible with Rode wireless go ii microphone and DJI mic wireless microphone system bodypack transmitter(tx).
  • Conveniently using for vlog, stage, houses of worship, presenters, broadcasters, TV presenters, lecturers, musicians, actors, singers, fitness instructor and any other applications requiring minimum microphone visibility with maximum comfortability and hands-free operation.
  • Omnidirectional condenser microphone, less noise, voice clarity, high sensitivity, more flexible, better for picking up voice.
  • With metal durable lavalier mic clip on clothing lapel.
  • High quality windscreen foam cover, keeps your microphone safe from harmful, dust, moisture, corrosion.
  • 3.5mm male plug, 3 poles TRS Gold-plated tip, better surface and less resistance.
Check Stock

WS2 Microphone Pop Filter/Windscreen Compatible with Rode NT1-A, Procaster, podcaster, NT2-A,K2, NT1000, NT2000and Broadcaster Microphones by SUNMON

  • 【Compatibility】- It's a professional wind shield that designs for your Rode NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2, and procaster,Podcaster, & Broadcaster microphones perfectly (As Rode WS2 Pop Filter)..
  • 【Professional】- Rode WS2 foam cover improves the recording quality by drastically filter out all unwanted background noises. Keep the Microphone audio sound better and clearer, clean wind-canceling sound..
  • 【Protective】- This windscreen protects the Rode Mic from dust and moisture. Protect your Microphone when its in the bag..
  • 【Material】- The foam cover wind killer's material is extremely soft and elastic is quality. A tight fit and would not come off in use..
  • 【Note】- Package included: 1 x Foam Wind Cover..
Check Stock

Pop Filter,PEMOTech [Upgraded Three Layers] Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask,Microphone Accessories for Vocal Recording,Youtube videos,Streaming

  • ▲▲NOT FOR BLUE YETI▲▲ WIDE APPLICATIONS - Our microphone pop filter suitable for 45 mm to 63 mm diameter microphones such as AT2020, AT2035, AT4040, AT2050, AT2020+, Samson Meteor , Scarlett CM25 ,CAD GXL2400, Apogee, Razer Siren X, BADAAX Mic, Rode NT1A, Rode NT-USB, MXL 770, MXL 910, MXL 2010, CAD U37, BM-800 and many other microphones..
  • THREE LAYERS FILTER MIC SHIELD - Three layers design include foam layer, metal net layer and basic etamine layer can effectively reduces the plosive, pops, crackles, wind interference, breath sounds when recording vocals. Absolutely necessary for recording, speaking or singing. This studio mic shield isolation helps to get your best vocal recording..
  • MAINTAIN CLEAN - Metal mesh matches plastic frame in a special appearance design. Functionally prevents saliva, keeping cleanness for your microphones and protecting your microphone..
  • EASY TO SET UP - Handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones..
  • PACKAGE & GUARANTEE - 1 X Pop Filter(microphone is NOT included)..
Check Stock

SMALLRIG Two-in-One Bracket Cold Shoe Mount Compatible with Rode Wireless GO and Saramonic Blink 500 for Two-Person Vlogging - 2996

  • 【DUAL MIC BRACKET】SmallRig Two-in-one Bracket for Wireless microphone 2996 is designed for 2-person vlogging, which is compatible with RODE Wireless Go & Saramonic Blink 500 and connect two audio sources at the same time..
  • 【MOUNT & CONNECT TWO MIC SYSTEMS】Using the built-in clip of two microphones, the bracket sets the two receivers stably with a compact design and lightweight structure..
  • 【BUILT-IN COLD SHOE MOUNT】The cold shoe mount allows you to slide the bracket directly onto the camera and the cage to provide convenient and reliable using experience for shooting. Using a shoe mount, the Two-In-One Bracket can be attached to the shoe mount of your camera, cage, or grip handle, and the two mic systems attach separately to the left and right sides via their built-in attachment clips..
  • 【2 X 3.5MM AUDIO INPUTS, 1 X 3.5MM OUTPUT】It allows you to attach two of these units at the same time, connect both into 3.5mm input ports, and output both to your camera at the same time via a 3.5mm output port. When you export the audio to your editing application, the two sources can still be edited separately..
  • 【PLEASE NOTE】1. Please assemble the receivers in the direction indicated by the arrow for using.
  • 2.The left and right channel will be combin....
Check Stock

Cable Matters (1/8 Inch) Unbalanced 3.5mm to XLR Cable 6 ft Male to Female (XLR to 3.5mm Cable, XLR to 1/8 Cable, 1/8 to XLR Cable)

  • ...S connector has 360 degree easy-grip treads for frequent unplugging and durability.
  • XLR to 3.5mm compatible with handheld, lavalier, shotgun and condenser Microphones such as Audio-Technica PRO70 Cardioid Condenser Lavalier/Instrument, Behringer Ultravoice, Pyle-Pro PDMIC58 Professional Moving Coil Dynamic Handheld, Rode REPORTER Omnidirectional Dynamic Interview, Rode NTG2 Condenser Shotgun, Sennheiser MKE 600 Camcorder Shotgun, Samson Q7 Handheld Dynamic.
Check Stock

Pop Filter, Aokeo Mic Pop Screen with Metal Mesh, Compact Microphone Pop Shield Windscreen for Recording Studio, Youtube Videos, Streaming, Podcast (Black)

  • WIDE APPLICATIONS - Our microphone pop filter suitable for 45 mm to 63 mm diameter microphones such as Aokeo Microphones, AT2020, AT2035, AT4040, AT2050, AT2020+, Samson Meteor , Scarlett CM25 ,CAD GXL2400, Apogee, Razer Siren X, BADAAX Mic, Rode NT1A, Rode NT-USB, MXL 770, MXL 910, MXL 2010, CAD U37, BM-800, Tonor, Neewer and many other microphones. NOTE: THIS WILL NOT FIT THE BLUE YETI.
  • THREE LAYERS FILTER MIC SHIELD - Three layers design include foam layer, metal net layer and basic etamine layer can effectively reduces the plosive, pops, crackles, wind interference, breath sounds when recording vocals. Absolutely necessary for recording, speaking or singing. This studio mic shield isolation helps to get your best vocal recording..
  • MAINTAIN CLEAN - Metal mesh matches plastic frame in a special appearance design. Functionally prevents saliva, keeping cleanness for your microphones and protecting your microphone..
  • EASY TO SET UP - Handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones..
  • QUALITY ASSURANCE- High quality rubber bands and synthetic metal mesh are used to make the filter more durable....
Check Stock

Rode VideoMic Go Windscreen Deadcat and Foam Cover - Rode GO Mic Camera Microphone, Indoor Outdoor Microphone Wind Muff by YOUSHARES (2 Pack)

  • Perfect Windscreen - Foam and furry wind screen pack fits perfectly on Rode VideoMic Go for indoor and outdoor use..
  • Outdoor Use - Rode VideoMic Go furry dead cat wind jammer minimizes wind noise and Vocal Plosives, perfect for recordings and travel blogs..
  • Indoor Use - Rode VideoMic Go microphone foam covers reduce ambient noise, blocks out plosives, keeps the pops down..
  • Perfect Protection - The VideoMic Go windjammer's material is soft and elastic to protect your microphone all the time..
  • Packing: 1 × Foam Windscreen,1 × Furry Windscreen Muff Cover..
Check Stock

Gator Frameworks Desktop Microphone Stand with Round Weighted Base & Adjustable Height (GFW-MIC-0501)

  • Desktop Microphone Stand with Round Weighted Base & Adjustable Height with Non-Slip, Vibration-Reducing Feet on Base.
  • Fits Most Popular Podcast Mics, Including Shure SM7B, Shure MV7, RODE Procaster, & RODE PodMic Models.
  • Great Mic-Placement Solution for Streaming, Podcasts, Broadcasts, Desktop Recording, Kick Drums, or Low-Profile Speaker Cabinets.
  • Standard Height Adjustment Twist Clutch with Min/Max Height: 9.5”/14.5” (241mm/368mm).
  • Heavy Duty Steel Tubing with Compact 5.88”/149mm Round Cast-Iron Base.
Check Stock

Airo by K-Tek Shockmount 1 for Rode NTG Series Microphone, Boom Poles and Mic Stands

  • Features professional molded rubber suspenders.
  • Absorbs & isolates mic from "swinging" & handling noise.
  • Works on Boompoles & mic stands (adapter incl.).
  • Fits Rode NTG lineup, Aputure Deity and other common shotgun mics.
Check Stock

Luling Arts Microphone Arm, Upgraded Mic Arm Micropone Stand with Pop Filter Boom Suspension Stand for HyperX QuadCast, Blue Yeti, Snowball, Yeti x ,Gaming , Podcasts

  • 【Upgraded Mic Arm Leg】The microphone arm Improved from hollow to solid leg,no longer break or shake. more stable and stronger.Will not break the legs, the market will break the legs after 6 months of use..
  • 【Mic Stand with Pop Filter】Adjustable microphone stand with U-shaped three layer pop filter, reduce the plosive, wind interference,Compatible for HyperX Quadcast,RODE NT1,AT202 USB+ and more diameter of 46mm-53mm microphones..
  • 【Stability Range of Motion】The boom arm with Super-strong spring, compact boom mic arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg. Easily Rotating or height Movement to show your perfect voice..
  • 【Upgraded Desk Mount Base】:The Suspension mic boom arm Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most desktop..
  • 【Complete Microphone Stand bundle 】The boom mic stand bundle comes a 3/8” to 5/8” screw adapter,a microphone arm stand, a table clamp, a mic pop filter, a manual,5pcs cable ties ..
Check Stock

Luling Arts Mic Arm, Adjustable Suspension Microphone Arm Desk Scissor Large Boom Arm Stand for Blue Yeti/Snowball/HyperX QuadCast with 6’’ Light, Shock Mount,2 Adapters, Pop Filter

  • 【Upgraded Mic Arm Leg】The microphone arm Improved from hollow to solid leg,no longer break or shake. more Stability Range of motion and stronger .this mic arm will not break the legs, the market will break the legs after 6 months of use..
  • 【Upgraded Large Boom Arm】Suspension Boom arm Upgraded from 13'' to 16'', works for HyperX QuadCast , Blue Yeti, Rode, Shure, Snowball, Blue Yeti Nano ,blue yeti Shock mount and more microphones.Max support weight is 70oz/2kg (4.4lb)..
  • 【Mic stand with Light】The desk microphone stand with 6‘’ LED Light let you moving and recordings for enhanced clarity and luminance. the desk lamp is integrated into the mic stand kits.Perfect for Computer/Game Room/Studio/Podcasting/YouTube in your any times..
  • 【Upgraded Desk Mount Base】The Upgraded Suspension desk mount microphone boom arm comes with big desk clamp, easy to set to desktop up to 2.4''/60mm thick. the headset hook is integrated into the desk clamp..
  • 【Complete Microphone Stand bundle 】The boom mic stand bundle comes 1x 16'' Large Mic Arm, 1x 6'' Ring light, 1x Table Big mounting clamp, 1x 3/8" to 5/8" Screw adapter ,1x 1/4"Screw adapter ,1x Mic Clip,1x Shock mount,1x Pop Filters, 5 x Cable tie,1 x Manual..
Check Stock

Rode SM4-R Suspension Microphone Shock Mount for 3/8\ or 5/8\ Thread Mounts

  • A suspension shock mount for mounting various RODE microphones onto a mic stand or boom pole with 3/8" or 5/8" thread.
  • Equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations.
  • The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning.
Check Stock