Top Rolled Edge Exhaust Tips

Upower Universal Diesel Trucks Car Exhaust Tip 4 Inch Inlet 6" Outlet 15" Long Stainless Steel Bolt-On

  • 【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut..
  • 【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation..
  • 【Wide Application】Universal fits 4" Inlet diesel trucks pickup car exhaust system. Note: Please keep the Exhaust tip away from salt,snow solvents and avoid using highly acid chemical cleaners.
  • 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
Check Stock

Pack of 2 Upower Exhaust Tip 2.25' Inlet 2' x 6' Outlet 10' Long Rolled Rectangle Stainless Steel Exhaust Tailpipe Tips fits Chevy Camaro Style

  • 【Design】Weld On – Rolled Edge – Angle Cut. Note:Regularly walking uphill can better drain the water in the exhaust tip.
  • 【Material】High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and deformation.
  • 【Wide Application】Fits 2.5″ INLET diameter car exhaust tail pipe..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

MBRP Exhaust T5169BLK Black Series Exhaust Tip 3 in. Inlet 10 in. Length Stainless Steel Black Coated 4 in. Tip w/Logo Plate Black Series Exhaust Tip

  • 【Design】Weld On - Rolled Edge - Angle Cut. Note:Regularly walking uphill can better drain the water in the exhaust tip.
  • 【Material】High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and deformation.
  • 【Wide Application】Fits 2.5" INLET diameter car exhaust tail pipe..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

Exhaust Muffler Pipe Tip Fit for Mercedes-Benz C63 Exhaust Muffler Tips AMG For C250 C300 C350 Mercedes W204 W211 C-Class SS304-Black

  • Exhaust Tip 2.25 inch Inlet 4.5 inch Outlet 12.00 inch long Dual Slant.To ensure proper fit make sure your exhaust INLET diameter is 2.25 Inch.
  • Professional installation is highly recommended.
  • Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty..
  • Weld On installation and Thickness Double Wall Slant Rolled Edge Design.
  • 12 MONTHS WORRY-FREE :We maintain high standard of excellence and strive for 100 percent customer satisfaction. If you have any query of your order, please feel free to contact us firstly before you leave a feedback, we will get back to you within 12 hours on working day!.
Check Stock

Upower Dual Exhaust Tip 3 Inch Inlet 3' outlet 9.5' Long Tail Pipe Double Wall Polished Stainless Steel

  • 【Design】Weld On – Double Wall Slant Angle Cut – Rolled Edge.
  • 【Material】High Quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive,never Rusty..
  • 【Wide Application】Universal fits 3″ Inlet trucks car exhaust tail pipe muffler tips..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

Yonput 1 PC 2.5 Inch Inlet Exhaust Tip, 3.3" Outlet 5.7" Overall Length, Stainless Steel Black Powder Coated Exhaust Tailpipe, Rolled Angle Cut, Car Universal for 2.5" OD Tailpipe (Bending)

  • Dimension: 2.5 inch inside diameter inlet, 3.3 inch outside diameter outlet, 5.7 inch overall length. Please make sure the outside diameter of your car tailpipe is 2.5-inch before purchase..
  • High Quality: The stainless steel exhaust tail is made of high quality stainless steel with strong anti-corrosive, it effectively resist heat, rust and deformation to protect and decorate your tailpipe system well..
  • Stylish Design: Black powder coated surface treatment, high temperature resistance, not easy to scratch and fall off. Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound..
  • Easy Installation: Bolt On Installation, not easy to screw off, no drilling or welding needed..
  • Maintenance Tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips to keep the surface clean..
Check Stock

AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4' Inlet 6' Outlet 15' Long Chrome Polished Finish Stainless Steel Universal Exhaust Tail Tip for 4' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt On, Silver

  • Dimension: standard 4″ x 6″ x 15″(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome polished finished offer your car with a a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On

  • Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal

  • Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On

  • Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
  • universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Exhaust Tip 2.5 Inlet 2 x 6 Outlet 10 Long Rolled Rectangle Stainless Steel Exhaust Tailpipe Tips Mirror Polished Weld-on

  • 10 inch Overall Length, and if the outlet diamater of your tailpipe is about 2.5 inch, then this....
  • 【Design】Weld On - Rolled Edge - Angle Cut..
  • 【Material】High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and....
  • 【Wide Application】Fits 2.5" Inlet diameter car exhaust tail pipe..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock