Top Roller Ball Bearing

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings plus 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings plus 1 roller bearing (7000 size).
  • Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range.
  • Extended bent handle with power knob gives anglers additional torque and power for hard pulling fish..
  • 6 pin centrifugal brake gives consistent brake pressure throughout the cast.
  • Synchronized level wind system improves line lay and castability.
Check Stock

Prime-Line D 1762 Sliding Door Roller Assembly with 1-1/4 inch Steel Ball Bearing

  • Used by Nu-Air and a variety of other sliding patio door manufacturers.
Check Stock

(6) Garage Door 2\ NYLON ROLLER Wheel w/ Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (1) Sealed Nylon Garage Door Roller.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Prime-Line D 1797 Sliding Door Roller, 1-1/2 inch Steel Ball Bearing, (2-pack)

  • Used to replace rollers that are 1-1/2 in. diameter.
  • Can be mounted using a rivet, a roll pin, drive pin, binder post and screw or bolt and nut to install the roller in place.
  • Contains 2 steel ball bearing wheels, 2 axle pins, 2 roll pins, 2 carriage bolts with nuts, 2 rivet axels and 2 binder posts with #8-32 x 1/2 in. screws.
  • Easy to install in less than 30 minutes with a few simple tools.
  • Can be used in many different patio door or closet door roller assemblies.
Check Stock

Garage Door 2\ NYLON ROLLER w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty Smooth by The ROP Shop

  • The ROP Shop replacement (Pack of 2) 2" Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(2) Garage Door 2\ Nylon Rollers 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • (Pack of 12) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (12) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(4) Garage Door 2\ NYLON ROLLERS w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • (Pack of 10) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (10) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(6) Garage Door 2\ Nylon Rollers w/Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • (Pack of 2) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (2) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Youdert 2\ Grip Ring Caster Swivel Furniture Ball Casters Rolling Vintage Wheel Casters with Sockets Brass Ball Caster Wheels for Desk Wooden Chair Coffee Stand Pack of 4

  • [Set]: Flange mounted ball transfer come with 20 pieces for you to install, make your life convenient, hope you enjoy the fun of DIY..
  • [Purpose]: This roller ball bearing is just what you need for constructing movable surfaces in the home, garage or professional shop..
  • [Premium]: Stainless Steel ball transfer is good material ball wheels, moving quietly and safely..
  • [Practical]: Roller Ball Transfer Bearings is adopts precision production to enhance the stable characteristics and high reliability..
  • [Durable]: Ball Transfer Bearing is made of steel material, ensure long service life and more better using performance..
Check Stock

TIHOOD 10PCS Two Holes 5/8\ Nylon Ball Transfer Bearing Unit Table Conveyor Roller Ball for Transmission, Furniture, Wheelchair

  • Universal Rotation Ball : We offer you a 10-pack of universal roller set. Size is 1.25''*0.94''*0.78''(L*W*H). Rotate in all directions, easy to use..
  • Practical and convenient: use the ball for transferring items in any direction, greatly reducing the labor intensity of workers. Stainless steel roller ball is easy to install, flexible transmission, reliable performance and simple maintenance..
  • High quality material: the roller is made of high quality full carbon steel, which has the characteristics of strong flexibility, wear resistance, durability and high hardness..
  • Widely used: The distribution density of the universal ball can be set arbitrarily according to different load-bearing requirements, and you can also choose universal balls with different load-bearing strength. Mainly applied to transfer system, processing system, workbench, etc..
  • Quality Assurance: We provide good products and offer excellent service to our customers. If you receive a defective product or have any problems during use, please feel free to contact us, We will try our best to help you deal with the issue..
Check Stock

4 Set Fits for 25mm Axles Trailer Wheel Hub Bearings Kit 32205 Bearings Rotary Quiet High Speed and Durable for Tapered Roller Bearings.

  • Product Size. The bearing rotates quietly and at high speed, and the high-quality chrome steel bearing is durable. Product material: steel.
  • number of rolling element columns: single column.
  • Easy to Use. The outer ring and inner parts (inner ring, roller and cage parts) of the ball bearing can be separated for easy assembly and disassembly..
  • Multiple Usage. Ball bearings are used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, injection molding machines, textile machinery, doors and windows, roller skates, toys, etc..
  • Made by Experts. The manufacture of professional bearings for tapered roller rotators began in 1945, which is worthy of your discovery and trust..
  • Customer Service. 1 year/50,000 miles free replacement or refund without reason, don’t worry about buying..
Check Stock

16PCS 5/8 Inch Roller Ball Transfer Bearing, Ball Bearing Rollers, Stainless Steel Ball Transfer Bearing Casters Universal Base Conveyor Roller Ball for Conveyor, Roller Stand, Load Capacity 33 lbs

  • ☛SIZE: CY-15H 5/8 inch diameter ball bearing roller, 360 degree rotation..
  • ☛CAPACITY: With a load bearing capacity of 28lbs..
  • ☛MATERIAL:Housing be made of carbon steel material..
  • ☛NOTE:Roller Ball made from bearing steel.
  • ☛APPLICATION:Widely used in transmission system, feeding system, processing system, processing machinery..
Check Stock