Top Roller Screw Actuators

DIYHD SLD-8FT Sliding Hardware Rolling Library Kit(No Ladder), 8ft, Stainless Steel

  • Only hardware,not including ladder and floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,4ft track*2,track connector*1,track&wall connector*6,thick spacer*6,end cap*2.
Check Stock

Baomain Horizontal Roller Plunger Limit Switch TZ-6102 with M20 Cable Glands Work for Heavy Duty Door Sliding Doors/Windows Pioneer,Welbon Air Curtains Maxwell with IP65 Waterproof

  • Built-in CM miniature limit switch, strong aluminum cast shell, design for water-proof and oil-proof.
  • It is the same as CM micro switch in the rated value and characteristics.
  • Various of actuators that are taken convenience for using.
  • Each switch is equipped with cable fixator, including rubber boot, metallic washer, plastic screw nut.
Check Stock

MUXSAM 10Pcs 0.24\/6mm OD Inline Skate Axle Screws Replacement, Shaft Hex Socket Screw, Inline Skate Wheel Axles Roller Blades Bearing, Wheel Axles Repair Tool (1.42\/36mm)

  • ENOUGH SCREWS: There are 10pcs female and male skating screws in a pack, suitable for inline skating wheels. Note: Both ends of the screw rod and nut must be inserted 4mm hex wrench to screw, and if only use an hex wrench, then it will turn with the However, and will not screw tightly..
  • TWO SIZE: 31mm skating screw is the perfect replacement for the front wheel. 36mm skating screw is the perfect replacement for the rear wheel and brake bolt..
  • DURABLE & STURDY: Made of high quality iron with coating on the connecting part, it is durable, sturdy and not easy to loosen. Good to improve the service life and durability of the bearing. Easy to solve the straight line roller skating damage..
  • EASY TO INSTALL: Only suitable for skating shoes required the male and female screw fittings on the wheel. You can easily fix the two ends of the shoes with the hexagonal installation tool.
  • INLINE SKATE WHEEL SCREWS: In order to outdoor skating safely, you need to replace the broken inline skate screws regularly. These inline roller skate wheel socket screws are small in size, easy and portable for you to carry and store.
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

  • The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(12) Garage Door 2\ Nylon Roller 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • The ROP Shop replacement 2" Nylon Garage Door Roller with 4" Stem & 11-Ball 6200ZZ Precision Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

AOSKY Cordless Roller Shades Blackout Blinds for Windows Room Darkening Rolled Up Shades with Spring System, UV Protection Window Shades Door Blinds for Home and Office (35' W x 72' H, Grey)

  • 【Excellent Material】：AOSKY cordless roller shades made of 100% polyester material fabrics with reinforce thermal insulated coating, feeling soft and smooth. No burrs, strong wear resistance, and easy to clean.Our blackout blinds block 100% of sunlight and UV rays. The thermal backing reduces the loss of room heat and against cold through the windows in winter and summer, helping to reduce your energy bills..
  • 【New Innovative Design】: The cordless design is safer for kids and pets. The cordless roller blinds are more convenient than corded roller blinds. Built-in the robust spring-loaded mechanism, which has passed 5,000 times usual lifting or pulling down tests for each blind, You can stop the shade wherever you want smoothly. Open the roller blind, pull it to the place.
  • Shut the roller blind, you can gently pull the buckle, and the roller blind would automatically close..
  • 【How to choose right size】：To make sure to cover the entire window, outside mount shades need to be 4 inches wider than windows wide. If your windows width is 30", order size 34" would be okay for outside mount；If your windows are 30" wide, order 30" or slightly less for internal installation. Don't worry window blinds height,it can adjust from 0" to 72". （Pls....
Check Stock

Eureka U Extended Life Belt (Set of 2)

  • ... special lines on the surface to increase the friction of the belt. Keep your vacuum running smoothly. Our factory use original vacuums to make molds, making belts perfectly compatible with vacuums..
  • 【Installation Method】Using a Philips head screw driver remove the screws and lift off the brush plate. Remove the roller and the old belt. Attach the new belt to the motor pulley and the roller. With belt in place, push and slide roller into the unit, make sure the roller is in the correct place. Reposition the brush plate and screw in the screws. Note: If the belt is too tight to install, please stop the installation..
  • 【Replace Belts】Replace your vacuum cleaner belts every 3 to 6 months to ensure optimum performance of your vacuum cleaner. Due to frequent use, the belt will wear and eventually break. So it is recommended to check and replace the belt regularly. Package includes 4 pieces of belts..
Check Stock

(6) Garage Door 2\ NYLON ROLLER Wheel w/ Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (1) Sealed Nylon Garage Door Roller.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Amazon Basics Paint Roller Kit - Includes Paint Roller Covers and Paint Cage Frame With Paint Tray, 16-Piece

  • 16-piece paint roller kit for interior and exterior painting projects, including walls, trim, ceilings, furniture, and more.
  • Includes (1) 9-inch plastic tray, (1) 9-inch slip roller frame, (2) 9-inch microfiber refills, (1) 4-inch roller frame, (5) 4-inch polyester refills, (5) 4-inch PE forms, and (1) metal can opener.
  • Efficient paint brushes hold ample amount of paint and apply paint evenly for quick, consistent results.
  • NOTE: Soak roller cover in water for 2 minutes to remove any loose fibers.
  • Roller handle with its screw thread can be securely mounted onto an extension pole (not included) for better access to up-high areas.
  • Suitable for smooth or semi-smooth surfaces.
Check Stock

(10) Garage Door 2\ Nylon Rollers w/Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • The ROP Shop replacement (Pack of 12) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(10) Garage Door 2\ Nylon Roller Wheels w/Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • The ROP Shop replacement (Pack of 6) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock