Top Roofing Hammer
Arrow Fastener 256 3/8 in. T25 Staples
- READY FOR ACTION: These staples are used for all heavy-duty stapling applications: from installing insulation, housewraps, and roofing underlayment to upholstering fine furniture, installing window treatments, and making crafts.
- USE THE RIGHT TOOL: These staples are designed to be used with the Arrow staple guns, pneumatic tools, and hammer tackers, including the T50 Staple Gun, the 5700 Powershot Staple Gun and Nailer, the PT50 Pneumatic Staple Gun, the HT50 Professional Hammer Tacker, and more.
- HIGH-QUALITY CONSTRUCTION: The heavy-duty steel construction is designed for durable long-term holding.
- DRIVES DEEP: These staples feature precision points that drive deep into the base materials to ensure a firm, lasting hold when stapling into wood, fabric, carpet, or other materials.
- DIMENSIONS AND COMPATIBILITY: Leg length 1/2 Inch.
- COMPATIBLE TOOLS: T50, T50X, T50HS, 5700, T50RED, T50PBN, T501, HT50, HTX50, HT50MG, T50ACD, T50DCD, T50AC, ET501C, ET501F, PT50.
Check StockPeakWorks Fall Protection Safety Lifeline Rope Grab, Anchor 50' Vertical Cable, Galvanized Steel Snap Hook Harness Tools Equipment for Climbing, Rescue, Hunting, Roofing, V84084050
- 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
- 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
- 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
- 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple s....
Check StockArrow Fastener 60630 3/8' Wide Crown Heavy Duty Staples
- READY FOR ACTION: These staples are used for all heavy-duty stapling applications: from installing insulation, housewraps, and roofing underlayment to upholstering fine furniture, installing window treatments, and making crafts.
- USE THE RIGHT TOOL: These staples are designed to be used with the Arrow staple guns, pneumatic tools, and hammer tackers, including the T50 Staple Gun, the 5700 Powershot Staple Gun and Nailer, the PT50 Pneumatic Staple Gun, the HT50 Professional Hammer Tacker, and more.
- HIGH-QUALITY CONSTRUCTION: The heavy-duty steel construction is designed for durable long-term holding.
- DRIVES DEEP: These staples feature precision points that drive deep into the base materials to ensure a firm, lasting hold when stapling into wood, fabric, carpet, or other materials.
- DIMENSIONS AND COMPATIBILITY: Leg length 1/2 Inch.
- COMPATIBLE TOOLS: T50, T50X, T50HS, 5700, T50RED, T50PBN, T501, HT50, HTX50, HT50MG, T50ACD, T50DCD, T50AC, ET501C, ET501F, PT50.
Check StockBOSTITCH BHT150C 1/4" Manual Hammer Tacker
- Heavy-duty manual hammer tacker ideal for carpeting, roofing materials or insulation.
- Uses 2 full sticks of Bostitch BTA700 Series heavy-duty staples ranging from 1/4-in to 3/8-in, or Arrow T-50 heavy-duty staples.
- Features a rubber grip for user comfort and shock absorption.
- Heavy-duty steel construction for added durability.
- Loads two full sticks of Stanley TRA700 or Arrow T-50 heavy duty staples (1/4-in -3/8-in).
Check StockRoof Shingles Shingle Removal Tool Roofing Tools Pitch Hopper Shingle Nail Installer Roof Shingle Nail Puller Nail Remover Pry Bar For Safe Roof Shingles Replacement Roofing tools and Equipment
- 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
- 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
- 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
- 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple storage..
- 【A Must Have for All Roofers.】This shingles removal tool is a must-have for all roofers to remove or repair old or worn-....
Check StockArrow 508 Heavy Duty T50 1/2-Inch Staples for Upholstery Construction Furniture Crafts 1250-Pack
- READY FOR ACTION: These staples are used for all heavy-duty stapling applications: from installing insulation, housewraps, and roofing underlayment to upholstering fine furniture, installing window treatments, and making crafts.
- USE THE RIGHT TOOL: These staples are designed to be used with the Arrow staple guns, pneumatic tools, and hammer tackers, including the T50 Staple Gun, the 5700 Powershot Staple Gun and Nailer, the PT50 Pneumatic Staple Gun, the HT50 Professional Hammer Tacker, and more.
- HIGH-QUALITY CONSTRUCTION: The heavy-duty steel construction is designed for durable long-term holding.
- DRIVES DEEP: These staples feature precision points that drive deep into the base materials to ensure a firm, lasting hold when stapling into wood, fabric, carpet, or other materials.
- DIMENSIONS AND COMPATIBILITY: Leg length 1/2 Inch.
- COMPATIBLE TOOLS: T50, T50X, T50HS, 5700, T50RED, T50PBN, T501, HT50, HTX50, HT50MG, T50ACD, T50DCD, T50AC, ET501C, ET501F, PT50.
Check StockPacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools
- COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
- ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
- HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
- NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
- PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check StockArrow 509 Heavy Duty T50 9/16-Inch Staples for Upholstery, Construction, Furniture, Crafts, 1250-Pack
- READY FOR ACTION: These staples are used for all heavy-duty stapling applications: from installing insulation, housewraps, and roofing underlayment to upholstering fine furniture, installing window treatments, and making crafts.
- USE THE RIGHT TOOL: These staples are designed to be used with the Arrow staple guns, pneumatic tools, and hammer tackers, including the T50 Staple Gun, the 5700 Powershot Staple Gun and Nailer, the PT50 Pneumatic Staple Gun, the HT50 Professional Hammer Tacker, and more.
- HIGH-QUALITY CONSTRUCTION: The heavy-duty steel construction is designed for durable long-term holding.
- DRIVES DEEP: These staples feature precision points that drive deep into the base materials to ensure a firm, lasting hold when stapling into wood, fabric, carpet, or other materials.
- DIMENSIONS AND COMPATIBILITY: Leg length 9/16 Inch.
- COMPATIBLE TOOLS: T50, T50X, T50HS, 5700, T50RED, T50PBN, T501, HT50, HT55, HTX50, HT55BL, HT50MG, T50ACD, T50DCD, T50AC, ET501C, ET501F, PT50.
Check StockArrow 506 Heavy Duty T50 3/8-Inch Staples for Upholstery, Construction, Furniture, Crafts, 1250-Pack
- READY FOR ACTION: These staples are used for all heavy-duty stapling applications: from installing insulation, housewraps, and roofing underlayment to upholstering fine furniture, installing window treatments, and making crafts.
- USE THE RIGHT TOOL: These staples are designed to be used with the Arrow staple guns, pneumatic tools, and hammer tackers, including the T50 Staple Gun, the 5700 Powershot Staple Gun and Nailer, the PT50 Pneumatic Staple Gun, the HT50 Professional Hammer Tacker, and more.
- HIGH-QUALITY CONSTRUCTION: The heavy-duty steel construction is designed for durable long-term holding..
- DRIVES DEEP: These staples feature precision points that drive deep into the base materials to ensure a firm, lasting hold when stapling into wood, fabric, carpet, or other materials.
- DIMENSIONS AND COMPATIBILITY: Leg length 3/8 Inch.
- COMPATIBLE TOOLS: T50, T50X, T50HS, 5700, T50RED, T50PBN, T501, HT50, HT55, HTX50, HT55BL, HT50MG, T50ACD, T50DCD, T50AC, ET501C, ET501F, PT50.
Check StockArrow Fastener MGHTKIT-AM HT50 Heavy Duty Magnesium Hammer Tacker Kit for Insulation, Housewrap, Roofing Underlayment and Flooring, Includes 5000 508IP Staples, Silver/Red
- READY FOR ACTION: This manual tacker is great for professional or household projects where precision isn’t necessary, like insulation, house wrap, roofing underlayment, or flooring.
- The hammer design supports rapid action and reduces strain.
- CONVENIENT DESIGN: Durable sure-grip handle with a vibration reduction by 20%.
- HEAVY DUTY CONSTRUCTION QUALITY: Heavy duty body and corrosion resistant.
- EFFICIENCY AND STAPLE OPTIONS: The rear-load magazine holds two full strips of staples to minimize loading time.
- This tool works best with Arrow T50 staples and can fit 5/16-Inch, 3/8-Inch, or 1/2-Inch staples, providing options for a variety of needs.
- WHAT’S INCLUDED: One HT50MG magnesium hammer tacker.
- 5,000 508IP staples (1/2-inch leg length and 3/8-inch crown).
Check Stock39Pockets Tool belts for men with suspenders, 4\ Padded toolbelt, Tool belt with suspenders, Tool belt, Tool belt suspenders, Carpenter tool pouch, Tool belts for men,Tool belts for men construction
- ✔️ 10In1-Set: The carpenter pouches with suspenders come w/ 39pockets, bag suspenders, 2 detachable Tool Belts, 1 Hammer Holster, 2 nail bags carpenter, and 4 belt loops.-A complete tool harness for Pro..
- ✔️ Ful-Adjustable: No matter left or right hand! All parts are relocatable to fit the waist sizes 29"-48".-This carpenter tool rig includes 2 detachable belts for tools & 3 construction pouches for men..
- ✔️ Comfortable-Carry: This construction tool belt features two 4" Wide & Thick Padded Tools Belts. The 3" tools suspenders help distribute the weight and reduce fatigue..
- ✔️ Heavy-Duty: This tool belt with suspenders for men constructs the Ballistic 1680D fabric, Tank webbing & Gun-Metal hardware.-Rugged carpenters tool belts for men..
- ✔️ Quick-Access: The Orange interior & roomy tool pouches for carpenters help access the roofing tools and carpentry tools quickly.-An excellent carpenters tool belt for roofing tools and equipment..
Check StockESTWING Shingler s Hammer - 20 oz Roofer s Tool with Milled Face & Hickory Wood Handle - MRWS
- TRIPLE WEDGE CONSTRUCTION – Securely fastens hammer head to handle.
- HALF HATCHET HEAD – Use cutting edge for splitting wood shakes/shingles.
- BUILT FOR THE PRO – Roofers, framers, contractors, tradesman & serious DIYers.
- VERSATILITY ON THE JOB – Gauge for setting reveal of shingles & blade to trim roofing felt & asphalt shingles.
- GENUINE HICKORY HANDLE – Designed to fit the grip of the user’s hand ensuring comfort & control.
Check Stock