Top Roofing Screw

Primeline Tools 36-8092 Primegrip Knuckle Saver Roofing Knife and Shark Knife Combo Pack

  • Primegrip 36-292 primegrip knuckle saver roofing knife and 36-280 shark knife combo pack.
  • Long handle keeps knuckles from grazing against shingles.
  • Long-Lasting zinc-reinforced bottom edge and shallow screw for opening quickly.
  • Angled grip for easy cutting around caps, dormers and tight corners.
  • Clip holder keeps blades from rattling inside, comes with three SK5 hook blades.
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

#15 x 4\ Construction Lag Screw Stainless Steel T-30 Torx/Star Drive Heavy Duty Stainless Steel Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Best Screw for Maximum Corrosion Protection, High Quality Heat Treated Stainless Steel Grade 300 Series.
  • For use with chemically treated materials (ACQ) High Weather Exposure and High Moisture Areas.
  • Not For Applications With Direct and Continual Exposure to Salt Water.
  • Quality Wood Screw Thread Require Less Driving Torque And Provides Maximum Holding Power.
  • For construction applications as Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam.
Check Stock

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

  • [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
  • [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
  • [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
  • [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
  • [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..
Check Stock

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

Chudley and Greeno's Building Construction Handbook

  • On-top of joists installation - keep framing and under deck area dry..
  • Easy to install - 1. Staple on top of joists 2. Self sealing tape over joints 3. Screw downspouts to water evacuation holes..
  • Material cost is about $ 2/s.f. (Goberco membrane is about $1.5/s.f., self sealing joist tape is about $0.4/s.f. , regular downspout + plastic gutter + roofing screws are low cost)..
  • Save Time / Reduce Leaks - Fold against house wall for flashing (reduce leaks at ledger board) - Deep channel valley between joists - Regular downspout redirect water flow into a gutter (prevent water dripping / no special downspout needed). U.S. patent # 9,453,338.
Check Stock

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

  • 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
  • Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
  • Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
  • Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
  • Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..
Check Stock

DRY-TREAT Intensifia - - Combination Enhancer and Sealer for Natural Stone, Masonry, Patios, Driveways, Floors, Countertops, Garages, and More - 130832-1 Gallon

  • Helps create a seal along a roof's edges, around air vents, vent pipes and screw heads.
  • Offers excellent adhesion to aluminum, mortar, wood, vinyl, galvanized metal and concrete.
  • Improves the ability to continuously seal and remain flexible.
  • UV stabilized to prevent deterioration and discoloration, will not stain or discolor any material to which it is applied.
Check Stock

Primeline Tools 36-748092 Primegrip Knuckle Saver Roofing Roofer s and Shark Knife Combo Pack

  • Primegrip 36-292 primegrip knuckle saver roofing knife, 36-274 roofer's knife and 36-280 shark knife combo pack.
  • Long handle keeps knuckles from grazing against shingles. Long-Lasting zinc-reinforced bottom edge and shallow screw for opening quickly.
  • Angled grip for easy cutting around caps, dormers and tight corners. Lanyard hole for easy hands-free carry.
  • High visibility fluorescent green colour. Bulging grip prevents slipping. Clip holder keeps blades from rattling inside, comes with three SK5 hook....
  • Super heavy-duty knife with double notched blade location for added security. Easy blade change using a solid brass notched wheel.
Check Stock

Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock