Top Roofing Vents

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

Tesa 4970 Double Sided White PVC Tape: 1 in. x 60 yds. (White),04970-09006-00

  • USE AS A GASKET: DoubleStick is sticky on both sides and is perfect for use as a gasket when installing windows and vents on RVs, mobile homes, steel buildings, etc..
  • TWIST INTO A ROPE: DoubleStick works when folded into a bead, as moldable sealant to fill gaps or holes, as gasket around wall penetrations, and on RV under belly to keep debris out.
  • SEALS SEAMS: Perfect for roofing membranes seam repair and seal, and bonds to many surfaces including EPDM, TPO, Hypalon, aluminum, galvanized steel, gypsum board, wood, many plastics, fiberglass, brick, concrete, and masonry.
  • CONVENIENT SELF SEALING: DoubleStick tape is a self-sealing sealant tape used to create a permanent, weather proof, conformable seal between two or more surfaces.
  • EASY TO USE: Simple and quick three-step instruction, using sticky tape with no trays or messy solvents to clean up after the project completion, and no other adhesive needed.
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

Eazy2hD 4 Pack RV Self Leveling Lap Sealant for RV Roofs,RV Roof Sealant,Camper Caulking, Camper Sealer for Rubber Roof EPDM,White

  • Enclosed Trailer Roof Leaking - Lap Sealant creates a secure, strong seal with the roof’s edges, air vents and more.v.
  • EASY TO APPLY - RV Roof Sealant can be applied in wet or dry conditions.Use the caulking guns(not include) to apply..
  • Excellent Adhesion to Many Surfaces - Compatible with EPDM,TPO sheeting and most of RV roofing material,Adheres to aluminum, galvanized metal, fiberglass ,vinyl and concrete..
  • PREMIUM GRADE - UV stabilized to last for long time.Working Temps: -40° F to 200° F..
  • 6 MONTHS MONEY-BACK GUARANTEE.Any reason you are not satisfied,please contact us,we will make it right..
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

  • 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
  • Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
  • Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
  • Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
  • Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock