Top Room Temperature Cure

TotalBoat Table Top Epoxy Resin 2 Quart Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts

  • ... versatile DIY resin on wood, concrete, ceramic, stainless steel and more.
  • 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface.
  • the epoxy will level on its own and cure at room temperature.
  • maximum pour depth per layer is 1/8" - 1/4".
  • NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE.
  • all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured.
  • 2 QUART EPOXY KIT includes 1 quart of resin & 1 quart of hardener.
Check Stock

TotalBoat Table Top Epoxy Resin 4 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts

  • ... versatile DIY resin on wood, concrete, ceramic, stainless steel and more.
  • 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface.
  • the epoxy will level on its own and cure at room temperature.
  • maximum pour depth per layer is 1/8" - 1/4".
  • NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE.
  • all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured.
  • 4 GALLON EPOXY KIT includes two gallons of resin & two gallons of hardener.
  • coverage: 12.8 sq ft per gallon at 1/8" thick.
Check Stock

Rays Country Ham - 1.5 lb. / 3 - 8 oz. Packs - Biscuit Cuts - Blue Ridge Mountain Cured

  • Speck is a cured, lightly smoked ham. Although a close cousin to prosciutto di parma, speck is worthy of its own distinction when it comes to cured hams..
  • Speck is boned out before being rubbed down with a cure laced with spices like juniper and bay leaves. Then it is smoked and aged. That spiced cure gives speck a deeper taste that's more intense than prosciutto di Parma..
  • USDA KNOWLEDGE ARTICLE Dry-cured hams are shelf stable. These uncooked hams are safe when stored at room temperature because they contain so little water that bacteria can't multiply in them. In dry curing - the process used to make country hams and prosciutto, fresh meat is rubbed with a dry-cure mixture of salt and other ingredients..
  • PLEASE READ BEFORE PURCHASING: This product will be cooled through most of its journey with ice packs in an insulated container. The ice packs may melt during shipping however rest assured the product is dry cured. We recommend putting the product in the refrigerator when it arrives..
Check Stock

J-B Weld ExhaustWeld 2\ x 72\ Repair Wrap

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!.
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours..
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!.
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • ...reat flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
Check Stock

MG Chemicals 8329TFS Thermally Conductive Adhesive - Slow Cure, 25mL Dual Dispenser

  • Cure time of 1 hour 20 minutes at 80 °C or 96 hours at room temperature.
  • Dispensing Gun sold separately (cat# 8DG-50-1-1).
Check Stock

Smooth-On Silicone Mold Making Liquid Rubber OOMOO 30 Easy to Use - Trial Size 2.8 lb 3 Pack

  • MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary....
  • SHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the....
  • POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see....
  • LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax.
Check Stock

Rapid Cure Violet Plastisol Ink for Screen Printing Low Temperature Fast Curing Ink by Screen Print Direct Pint - 16 oz

  • Low Temperature Cure Plastisol Ink. Our Rapid Cure Inks Cure as low as 270°F for the best energy savings, dye blocking, scorching prevention, and....
  • Creamy bold formula plastisol Rapid Cure Inks have a high opacity - develop color quicker on the press. Does not dry out quickly on screen..
  • Rapid Cure has good bleed resistance, fast flash, easy to print and great brightness - Easy to work with short body that’s easy to clean.
  • Premium Rapid Cure Inks print great on a variety of fabrics. Print on poly and cotton blends with low bleed. Ink produces a very soft hand on all....
  • Made In USA | Eco-friendly Formula - Non Phthalate - CPSIA Certified Product.
Check Stock

Weld-On 3 Acrylic Adhesive - Pint and 3 Pack of Weld-On Applicator Bottle with Needle

  • Adhesion to a wide variety of substrates.
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • 【POT LIFE: 40~50 MINUTES, CURE TIME:4-5 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【SHORE A 15 & LOW VISCOSITY FOR EASY MIXING & POURING】this 15 Slow mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material to make a mold, no need degassing, the mold finished with Sipolysun Silicone Rubber has great flexibility and easy to demold, this silicone for mold making kit is the most suitable hardness for making DIY arts molds between 1cm to 20 cm..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Ou....
Check Stock

MG Chemicals - 8329TFF-25ML 8329TFF Thermally Conductive Adhesive - Fast Cure Epoxy, 25 mL Dual Dispenser

  • Working life: 4 minutes, set time: 15 minutes.
  • Cure time: 3 hours at room temperature or 15 minutes at 65 °c (149 °f).
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • 【POT LIFE: 50 MINUTES, CURE TIME: 6 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
Check Stock