Top Rotary Encoder

Fielect 10Pcs 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft

  • Package Content: 7 x Rotary Encoder Switch.
  • Total Size: 12 x 12 x 27mm/0.47" x 0.47" x 1.1"(L*W*H).
Check Stock

Tegg 2 PCS KY-040 360 Degree Rotary Encoder Module Brick Sensor clickable Switch with Knob Cap for Arduino

  • WITH SWITCH FUNCTION: The rotary encoder has switch function. Rotation Angle: 360 degrees (no stop point)..
  • DURABLE WEAR RESISTING: Made of high quality material, anti-corrosion, wear resisting and durable..
  • STABLE PERFORMANCE: Sensitive response, stable performance, long service life..
  • EASY INSTALLATION: Simple structure, easy to install and use. Rated voltage: DC 5V..
  • WIDE APPLICATION: Widely used in automotive electronics, multimedia audio, instrumentation, household appliances, smart home, medical equipment, etc..
Check Stock

Cylewet 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap for Arduino (Pack of 5) CYT1062

  • The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • The Material of Knob Cap: aluminium alloy.
  • The Specification of Knob Cap: diameter: 15mm/ 0.59in.
Check Stock

Taiss 5PCS Rotary Encoder Switch Push Button EC11 360 Degree 5 Pins 20 Detents Points Digital Potentiometer with Knob Cap

  • Product size:Shaft Size: 6 x 13mm/0.24" x 0.5".
  • total Size: 12 x 15 x 30mm/0.47" x 0.6" x 1.2"(L*w*h)..
  • Material: plastic, metal. Durable and long service life..
  • Applications: photographic lens, computer input, industrial control equipment, etc..
  • Package content: 5 x rotary Encoder switch+5 x Black knob cap.
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Assembled Finished Machine EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be....
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div....
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Power Adapter Assembled Finished Machine Q15001 White

  • ASSEMBLED FINISHED - ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can....
  • UPGRADED VERSION - The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others. It reaches....
  • HAND-HELD - This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET - You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED – ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can be used directly to avoid assembling/welding process problems and greatly save your time..
  • UPGRADED VERSION – The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the others. It reaches 5mV/div – 20V/div, while the others is only 10mV/div – 5v/div..
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and schematic are also provided..
Check Stock

HiLetgo 10pcs TTP223B Capacitive Touch Switch Module Touch Sensor Switch Digital Capacitive Touch Sensor Switch DC 2~5.5V

  • Model: incremental rotary encoders, AB two phases.
  • Connection: white = A phase, Green = B phase, red = power +, black = 0V Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor..
  • Output: AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ,the output of this type can and with additonal added pull-up resistor(not included) is directly connected MCU or PLC.
  • Encoder size: 38 x 35.5mm/1.49" x 1.39"(D*H).
  • Package content ：1 x Incremental Rotary Encoder.
Check Stock

LCD 12864 Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa

  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. Please note: With a SD Card base on back,SD card not included..
  • You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card..
  • All actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller..
  • Print your 3D designs without PC, just with a g-code design stored on the SD card..
  • LCD 12864 graphic smart display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking..
Check Stock

Treedix DSO138 Oscilloscope DIY Kit Handheld Digital Oscilloscope 1msps Real-Time Sampling Rate 2.4 inch TFT Display

  • UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div – 20V/div. Also, this updated version can be handheld..
  • DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier..
  • ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
  • WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided..
Check Stock

2 in 1 Handheld Oscilloscope Multimeter, New Update Professional LED Oscilloscope Multimeter with 2.5 Msps High Sampling, Automatic Waveform Capture Function,DC/AC Voltage/Current Test

  • UPGRADED VERSION - Please Calibrate the oscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld..
  • DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier..
  • ASSEMBLED FINISHED - AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
  • WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply, (Assembled Finished Machine) EM001

  • 【SIMPLE DESIGN】ETEPOPN EM001 oscilloscope kit is an assembled finished machine that can be used directly to avoid assembly/soldering process problems and saving you a lot of time. The display and MCU are mounted on the same board (motherboard) to avoid the use of inter-board pinouts. The analog channels are placed on a separate board containing most user-installed parts, thus allowing better separation of analog and digital circuits..
  • 【UPGRADED VERSION】The sensitivity of the EM001 oscilloscopes has been extended both in width and height which is wider and higher than the others It reaches 5mV / div – 20V / div while the others is only 10mV / div – 5v / div..
  • 【HAND-HELD】This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop..
  • 【ROTARY ENCODER】It has been added the rotary encoder makes parameter adjustment more quicker and easier..
  • 【WHAT YOU GET】You will get an assembled mini oscilloscope, BNC clip cable, and a power supply. Detailed operating instructions (troubleshooting guide) and schematics are also provided. If you have any questions about this digital oscilloscope, you can always contact us and we will reply within 24 hours..
Check Stock