Top Rotary Gear Pump Suppliers

Robinair (15120A) CoolTech Vacuum Pump - 2-Stage, 10 CFM

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/2 HP, 115V - 60Hz thermally protected motor, 10 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

EAWELLPR 35 Gallon Gas Caddy with Pump Fuel Transfer Gasoline Tank 4 Wheels Fuel Storage Tank for Automobiles ATV Car Mowers Tractors 35 Gallon

  • 【HEAVY-DUTY CONSTRUCTION】Material: Steel.
  • 【STEEL TANK WITH 4 WHEELS】Heavy-duty steel tank is sturdy and not easy to deform, which can be used for a long time. Two 10 inches wheels and....
  • 【ANTI-STATIC GROUND CLAMP】An anti-static ground clamp for the safety-discharged clamp is used to prevent accidental static discharges. There will....
  • 【2-WAY ROTARY PUMP】Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action. This fuel can is functional-ideal....
  • 【35 GALLON CAPACITY FOR MULTIPLE USE】This gas caddy is able to store and transfer up to 30 gallon gasoline, diesel or any other fuels, which is....
Check Stock

Robinair (15401) CoolTech Vacuum Pump - 2-Stage, 93 liters/minute

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/3 HP, 115V/220-250V - 60/50Hz thermally protected motor, 94 liters per minute free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4 inch and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

Robinair (15424) CoolTech Vacuum Pump - 2-Stage, 93 liters/minute

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/3 HP, 115V/220-250V - 60/50Hz thermally protected motor, 94 liters per minute free air displacement, and factory rated to 20 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4 inch male flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

Robinair (15121A) CoolTech Vacuum Pump - 2-Stage, 236 liters/minute

  • Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
  • Powerful 1/2 HP, 115V/220V - 60/50Hz thermally protected motor, 236 liters per minute free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
  • Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
  • durable molded polycarbonate base improves pump balance and minimizes vibration.
  • Iso-Valve isolates pump from system with just a quarter turn.
  • Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
  • 1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

Fill-Rite RD1212NH 12V DC 8 GPM 1/5 HP Bung Mounted Heavy Duty Aluminum Fuel Transfer Pump with Standard Hose and Nozzle

  • PORTABLE PUMP: Rotary vane high-flow fuel transfer pump designed for gas, diesel, biodiesel up to B20, kerosene, and E15.
  • ALUMINUM CONSTRUCTION: High-flow pump features heavy-duty aluminum construction.
  • FEATURES: 30-minute duty cycle with 8 GPM flow rate.
  • 3/4-inch inlet and outlet with female NPT threads.
  • Fuel pump with an aluminum and rotary vanes.
  • INCLUDES: Includes pump, manual nozzle, 8-foot - 5/8-inch diameter hose with 3/4-inch fittings, 23 - 41-inch a telescoping suction tube, nozzle boot, bung tank mount adapter and 10-foot quick-connect power cord with alligator clips.
  • Dimensions (L x W x H): 19 x 18 x 8 inches.
  • Manufacturer warranty: 2-year limited warranty.
Check Stock

Private Label New CIRCULATING Water Pump for MERCRUISER OMC Volvo Penta 4.3 5.0 5.7 305 350 V6 V8 Engines

  • Engine water pump for Mecruiser, Volvo Penta, Indmar, Marine Power, PCM and others with GM engines.
  • Fits all years of GM 5.0 and 5.7 engines. Fits both composite (plastic) and steel timing covers on all years of 5.0, 5.7, 6.2 small block GM V8....
  • Fits all 4.3L V6 engines 2007 and older. Does not fit aluminum timing cover 2008 and newer. Fits both Composite (plastic) and steel timing covers 2007....
  • This water pump comes from the same factory that suppliers Mercruiser. This is an OEM pump without and OEM price!.
  • This pump is assembled in the USA! This pump has a bi-directional BRONZE impeller. Beware of cheap pumps with cast iron impellers. This pump is....
Check Stock

AnEssOil 1L-5L Lab Rotary Evaporator Rotavapor 0-120rpm 0-399℃ SENCO Equipment w/Motor Lift, Digital Heating Bath, Condenser Full Set of Glassware Kits and Circulating Water Vacuum Pump (5L Liters)

  • High Performance Rotary Evaporator adopts polytetrafluoroethylene and rubber compound seal,which can keep high vacuum degrees. High Performance Rotary Evaporator adopts efficient condenser, which can assures high recovery rate..
  • High Performance Rotary Evaporator adopts convenient large digital display and continuous adjustment for rotation speed&bath temperature. High Performance Rotary Evaporator adopts double layer cooling coils for improved condenser performance..
  • The Water Circulating Vacuum Pump's water saving effect is obvious. Due to the water circulation operation, the water added into the water tank can be recycled and reciprocated, which overcomes the phenomenon that a large amount of water is wasted when the vacuum is directly obtained by directly tapping the tap water method, and the same vacuum degree is achieved by measuring the continuous operation in one working day..
  • The Water Circulating Vacuum Pump is connected with the tap water source, and the circulating water temperature can be kept constant under the condition of continuous operation for a long time by an appropriate amount of supplementary injection water source, which can ensure the vacuum degree is not lowered and the supply of circulating cooling water can be realized..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

FavorCOOL AC Gauges and Vacuum Pump Kit, 3 cfm 1/4 HP HVAC Vacuum Pump and AC Manifold Gauge Set for R410a R134a R22 Refrigerants, with 4FT Hoses Adjustable Couplers Adapter and Can Tap

  • ..., 3 color-coded 4ft hoses for R410a recharging, 2 adjustable 1/4'' aluminum made quick couplers, plus a brass tank adapter and a can tap 1 bottle of 170ml vacuum oil is also included for easy refrigerant evacuation, restoring, and other automotive AC repair work.
  • ROTARY VANE VACUUM PUMP --- FavorCOOL single-stage 3 CFM rotary vane vacuum pump is powered by a 1/4 HP all copper motor to keep your HVAC servicing fast and easy. Its 3 cfm flow rate can draw your system down as low as 37.5 microns (5 Pa). Intake Ports: 1/4"Flare. Voltage/Frequency: 110/60HZ. Oil Capacity: 170 ml..
  • DURABLE VACUUM PUMP --- The lightweight cast aluminum structure effectively dissipates the heat generated during operation and resists chemical corrosion to ensure years of beneficial use.
  • Its innovative design also prevents oil backflow and separates the exhaust from any oil vapors, limiting contamination and providing safer operation..
  • HIGH ACCURACY AC GAUGES --- The manifold AC gauge set is excellent for diagnosing and repairing AC systems. Ideal use for R22, R134a, and R410a, our charging hoses are made by 100% Virgin Teflon Diaphragm....
Check Stock

Gasoline Tank Truck Emergencies: Responding to MC/306/DOT 406 Cargo Tank Trucks Transporting Gasoline/Ethanol Blends and Fuel Oils

  • portable gas tank with pump Can store gasoline, diesel, kerosene or biodiesel fuels.
  • The large fuel caddy allows you to store up to 30 gallons of fuel, Simply turn the hand pump forward or reverse for dispensing or siphoning fuel. The 8.2 foot hose with fill neck easily fits in any gas tank..
  • Hand Siphon Rotary Pump has been specially processed to have a better sealing effect and prevent gasoline or diesel from leaking.It adopts solid rubber wheels with special material,The Tire thickness is 2in and tire diameter is 9.5in. which can better load-bearing and wear-resisting. After our actual measurement, it can be suitable for many occasions..
  • Easy to use reversible rotary pump fills and siphons by simply reversing the cranking action. The easily accessible, wide diameter fill neck provides a larger opening for safer, faster refills with less spilling and less waste of expensive fuel..
  • This gasoline container is suitable for ATV, UTV, motorcycle, ship, motorcycle, etc.
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock