Top Rotary Tool Tungsten Carbide Cutter Bit

Groovemaster Carbide Tungsten Steel Replacement Cutter Head for Golf Club Groove Sharpeners Made by Specialty Golf Products

  • GROOVEMASTER TUNGSTEN CARBIDE STEEL CUTTER HEAD is the replacement cutter head for ANY 6 Head Groove Sharpener made by Specialty Golf Products..
  • REPLACE EXISTING CUTTER HEAD EASILY using existing screw using standard and commonly found 2.5mm hex wrench as in image shown (wrench not provided). Takes less than 2 minutes to upgrade..
  • CLEANS, DEEPENS AND RESTORES WORN GROOVES with the best accuracy of any golf club groove tool on the market. Premium cutter head, made of tungsten carbide steel, cuts through standard steel, titanium and even maraging steel with unmatched ease..
  • MEASURING A HARDNESS OF 65 ON THE ROCKWELL SCALE, this premium cutter head is made from high grade precision tool vacuum heat-treated carbide tungsten steel. The Groovemaster Carbide Cutter Head is the ultimate solution for maximum durability and re-grooving effectiveness..
  • PRECISION GROUND AND ENGINEERED TO EXACTING TOLERANCES to ensure that it does not compromise USGA rules regarding groove width and depth..
Check Stock

TianTac Tungsten Carbide Rotary Burr Set 10pcs Carving Burr Bits with 3mm Shank 6mm Bit for Wood & Stone Carving Steel Metal Working

  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it..
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction..
Check Stock

S&F STEAD & FAST Carbide Burr with ¼” Shank ½” Cutter Dia 1” Length, Professional Grade Tungsten File, Die Grinder Bit for Electric or Air Die Grinder, Cylinder End Cut, Grinding Burr bit for Metals

  • CNC machined cutting burrs rotary file bit made with heat-treated tungsten carbide with HRA hardness 003e 90, hard enough to handle metals including steels, copper, cast irons and nickel alloys. Performs better than HSS burrs, especially at high temperatures..
  • Grinder burr bits with shank diameter 1/4”, head diameter ½” / 12.7mm, head length 1” / 25mm, total length 2 ¾” / 70mm.
  • Tungsten carbide bit - Cylinder end cut shaped tungsten grinder head to be used with electric, air / pneumatic rotary tools at maximum rotation speed of 35000 rpm.
  • Popular metal burr double cut surface for better control of the carbide bit and for fast stock removal.
  • Carbide bur - Use for cutting / shaping / deburring metals, grinding welds and cylinder head porting.
Check Stock

Dremel Max Life 9903HP 1/8" (3.2mm) Tungsten Carbide Rotary Tool Carving Bit

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability that are built to give you longer lasting, stronger performing, versatile accessories.
  • The Max Life 9903HP tungsten carbide carving bit is coated in titanium nitride and is engineered to last 1.5X longer than the standard, non-coated Dremel 9903 bit.
  • The tungsten carbide bits can be used for more aggressive applications to shape, smooth, or grind hard materials such as metals, hardened steel, fire ceramics, cast iron, plastics, and hardwoods.
  • Ideal for projects like metal or glass engraving, stone carving, or removing flash from castings.
  • The ball nose shape of the carving bit can be used for deep removal or to hollow out material, the sides can be used to cut flat areas or round edges, and the tip makes round-bottom slots and grooves and can be used for rounded side cuts.
Check Stock

5pc Carbide Burr Set 1/4\ Shank Tungsten Double Cut Rotary Die Grinder Bits - Cutting Burrs for Milwaukee, Dewalt and Die Grinder Accessories - Wood Carving Metal Working & Sturdy Storage Case

  • ✔️ [PREMIUM DIE GRINDER ACCESSORIES DESIGNED IN THE UK] Whether your job implies precision metal work, engineering, tool making, welding, deburring, jewelry making, or you enjoy various DIY arts and crafts or hobbies such as sculpting, TaitaTools carbide bur sets are exactly what you need for premium results!.
  • ✔️ [TOP QUALITY MATERIAL] These rotary tool bits are made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double cut tooth angle which prevents chipping, this tungsten grinder bit set is superior to any high speed steel burr bits on the market..
  • ✔️ [A TOOLBOX MUST] This 5-piece rotary burr set for wood and metal includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone. These carbide bits include: SA, SC, SD, SF and SL type burrs..
Check Stock

20PC Double/Single Cut Carbide Burr Set - 0.118 3mm Shank Rotary Tool Cutting Burrs - Dremel Accessories Fordom Flex Shaft Dewalt And Die Grinders - For Wood Carving Metal Working And Engraving.

  • ✔️ [PREMIUM BURRS DESIGNED IN THE UK] Whether your job implies precision metal work, engineering, tool making, welding, deburring, jewelry making, or you enjoy various DIY arts and crafts or hobbies such as sculpting, TaitaTools carbide burr sets are exactly what you need for premium results!.
  • ✔️ [TOP QUALITY MATERIAL] These rotary tool bits are made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double and single cut tooth angle which prevents chipping, this tungsten carbide bit set is superior to any high speed tungsten carbide burrs..
  • ✔️ [A TOOLBOX MUST] This 20-piece burr set for wood includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone. The kit includes a massive selection of shapes for all types of cuts..
Check Stock

DrillForce 10pcs 3/16 inch x 6 inch SDS Plus Hammer Drill Bits, Rotary Hammer Drill Bits , Ideal for Drill Holes into Masonry, Concrete, Brick & Cinder Block.

  • Package and Size:10 piece. Diameter Size 3/16 inch, Total Length 6 inch..
  • Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block..
  • Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling..
  • Carbide Tipped: Bits are carbide tipped for long life in tough applications. Centric conical tip guides bit through concrete and provides optimal hole geometry. Wear mark alerts user when bit is no longer precise. Longer life in rebar vs. standard bits..
  • IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS-Plus bits for reliable anchoring and sturdy holes. Fit certain Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable drills and other SDS-Plus Rotary Hammers..
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

WHISTECK Carbide Burr Set 8Pcs Double Cut Tungsten Carbide Rotary Burr set 1/4 inch Shank Die Grinder Bits Carbide Rotary File for Metal Wood Carving Engraving Polishing,Drilling

  • 【PREMIUM MATERIAL】: 8pcs carbide rotary burr set, made of heat-treated tungsten carbide steel, good toughness and resistance, sharp and sturdy. Unique tooth angle prevents chipping for the longest lasting design possible.
  • 【DOUBLE-CUT DESIGN】: Double cut die grinder bits for fast material removal and smooth finish. Various shapes and sizes cutting burrs with end cut for interior contour work and face milling. 6mm (about 1/4 inch) shank carbide bit set fits most pneumatic tools and rotary die grinders.
  • 【VERSATILE FEATURE】: High accuracy and high efficiency of our rotary file save your time and meet your different needs. Suitable for metalwork, tool making,wood carving, cutting, welding, chamferring, deburring, casting and sculpting. Easy to grasp and use, safe and reliable.
  • 【WIDELY APPLICATION】: Most popular for body shops, fabrication shops,brake shops, industrial shops, die manufacturers, home repairs ect. Processing good on iron, cast steel, carbon steel, stainless steel, alloy steel, copper, marble, bone, wood and other non-metal..
  • 【EXQUISITE PACKAGE】: Our tungsten carbide burrs are packed in a nice portable case, always keep neat and convenient. High texture box for shipping and protection, an essential kit for friends and relative....
Check Stock

Dremel 9903 Tungsten Carbide Cutter

  • The product is Tungsten Carbide Cutter, 1 by8" Diameter With 1 by8" Shank.
  • Rotary tool accessory for shaping, smoothing and material removal.
  • For use on both hardened steel and stainless steel.
  • For use on cast iron, nonferrous metals and fired ceramics.
  • May also be used on plastics, hardwoods and other hard materials.
Check Stock

HIDOTOL Carbide Burr Set 1/4 Shank 10PC Tungsten Double Cut Carbide Rotary Burr Set for Metal and Wood Carving Grinding Polishing Engraving Drilling in Sturdy Round Case.

  • High Quality Material - HIDOTOL carbide burr set are made of premium heat-treated tungsten carbide material with high strength, hardness and durability, which is guaranteed to withstand the test of time..
  • Characteristics - 1/4" Shank fit for most rotary tools and grinders. This die grinder bit set is easy to grasp and use, safe and reliable.
  • double cut tooth angle which prevents chipping.It can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade and marble..
  • Specifications - 10pcs tungsten carbide burr set includes SA, SC, SD, SF, SL, SE and SH type burrs, different shapes can meet your need..
  • Widely Used - Precision metal work, engineering, sculpting, tool making, deburring, jewelry making or welding, or you enjoy various DIY arts and crafts. HIDOTOL carbide bur set are exactly what you need for premium results with rotary burrs..
  • 100% Satisfaction Guarantee - If you are not fully satisfied with our product for any reason, please feel free to contact us, we will try our best to serve you..
Check Stock

1/4 Inch Shank Pattern Flush Trim Router Bit Set, Shank Carbide Pattern Router Bits Set, Template Straight Top Bearing Router Bits with 2 Regular Blades, Prevent Tear-Out, Suitable for Light Work

  • Carbide Blade Length: 1/4 inch router bits tool shank flush trimming milling cutter bit set, blade diameter 1/2 inch. Blade length 11.9mm, 20mm, 25mm, 38mm..
  • High Quality: C3 microcrystalline tungsten carbide blade, high-quality alloy steel body. Heat-resistant PTFE coating..
  • Various Uses: for trimming, slotting, etc. Such as DIY projects, lettering, and other template work suitable for solid wood, particleboard, MDF, plywood, etc. Router bits create a very smooth cut..
  • Cutting Smoother: 1/4 shank pattern milling cutter bit has 2 cemented carbide blades, high-quality tungsten steel alloy, and high-tech special grinding technology. The Router bits blade has good strength and high hardness, so the template can run on the bearing. This allows you to cut pellets smoothly and prevent tearing..
  • Perfect After-Sales Service: We will provide you with perfect after-sales service. After you purchase the goods, if you encounter any problems, please contact us in time..
Check Stock