Top Rotary Tool Vise Stand

Wheeler Firearms Accurizing Torque Wrench and Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance

  • INCLUDES: Wheeler FAT Wrench & Tipton Gun Vise 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx & Leupold specialty flat blade), ¼” socket & a convenient plastic storage case.
  • EASE OF USE: Gun Vise features L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape, FAT Wrench allows for application of repeatable, accurate torque settings.
  • VERSATILITY: Vise is easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.
  • ACCURACY: Torque Wrench +/- 2 in/lbs up to 40 in/lbs.
  • 40 – 65 is +/- 5%, the Tipton Vise makes it easy to work on your firearms and reach precise specifications during gunsmithing or scope mounting.
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”, the Vise is made from non-marring, solvent-resistant polymer to stand up to years of hard use for gun maintenance and gunsmithing.
Check Stock

Kingfisher Fly Fishing Clarkfork True Rotary Fly Tying Vise, Gold

  • True rotary fly tying vise with two ball bearing housing, extreme smooth and balanced..
  • Hardened tool steel jaws fitting 26 to 4/0 hook sizes..
  • Arms, bearing housing, handle, shaft and plate are made of hard anodized marine grade Aluminum..
  • The brand Kingfisher Fly Fishing is owned by The Kingfisher Fly Shop, based in Missoula, Montana. .
  • We are an American, brick and mortar store founded in 1997 by two fishing guides. The same two fishing guides run the company today..
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • ...To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
  • Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • Bending Forge Scrolling Welding Jig: Fits in 1 inch Hardy hole in an anvil or can be used in....
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
  • it lays a good foundation for your smooth completion..
Check Stock

3 / 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS

  • 3"/ 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS.
  • WORM: GEAR RATIO - 1: 36, WHICH MEANS THAT 1 COMPLETE HANDLE ROTATION TURNS THE TABLE BY 10 DEGREE.
  • ROTARY BASE DIMENSIONS: 4-1/8" x 3-1/4" (4 x T-Slots: 5/16"). HORIZONTAL HEIGHT OF ASSEMBLY IS 75 MM (* REFER PICTURE). CAN BE MOUNTED HORIZONTALLY &....
  • COMES WITH 80 MM CASTE IRON QUALITY ROUND VICE/ VISE WITH FIXING NUTS BOLTS. PRECISELY GROUND. MOVING JAWS HAVE VERTICAL 7 HORIZONTAL VEE GROVE TO....
  • VICE IS DRILLED (M6) IN A MANNER THAT IT WILL FIT BOTH TO A 3 AS WELL AS 4 SLOT TABLE..
Check Stock

10pc Diamond Tipped Drill Bit Set - 1/16, 5/64, 3/32, 1/8 - Drill Glass Stone - Fits Dremel

  • Twist drill bits for fine-detail drilling with the cutting power of diamond.
  • 10 bit set, two each in diameters 5/64″ & 3/32″ and three each in 1/16″ &1/8″.
  • Industrial diamond permanently brazed to cutting tip during manufacture.
  • Hardest drilling material available, cuts glass, stone, tile.
  • use with pin vise for hand drilling or Dremel-type rotary tool, power drill.
Check Stock

M MAXIMUMCATCH Maxcatch Rotary Fly Tying Vise Alloy Travel Vice (TVC Green Fly Vise)

  • A beginner’s vise that will satisfy experienced tiers as well..
  • The Apprentice Vise has a rotary tension screw, a hinged stem, and will hold hooks size 28 to 1/0..
  • All anodized aluminum from 2024 aluminum with hardened steel jaws. Improvements include a rotating head, a hinged stem..
  • The rotating head allows tiers to turn a fly over without removing the hook from the jaws, giving them much greater versatility with this vise. C-clamp opening distance 2 3/4″7cm..
  • Includes an extra fly tying tools caddy and a vice fly rack.
Check Stock

Vise Universal Rotate 360° Work Clamp-on Vise Table Vise 3

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for....
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise....
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
Check Stock

Colorado Anglers 102 Supreme, Rotary Fly Tying Vise - Practical Fly Fishing Vise with 360° Rotation and Multiple Adjustments for Teasers and Jigs

  • 360° ROTATION – The Colorado Anglers 102 Supreme, Rotary Fly Tying Vise enables 360 degree rotation whilst hooks are clamped for a better fishing experience.
  • MULTIPLE ADJUSTMENTS – This fly fishing vise is both practical and multifunctional, providing multiple adjustments for teasers and jigs.
  • RESILIENT DESIGN – This fly vise’s resilient design can hold a heavy gauge hook well enough to flair out bucktail and it comes with a cast iron clamp.
  • HOOK FUNCTIONALITY – Although designed for small hooks, it can accommodate most hook sizes, as well as saltwater hooks and it provides access to rear of hook.
  • FOR MULTIPLE JIGS – The vise can be used for a range of jigs, including 24oz jigs, 8oz bottom jigs, bucktail jigs, crapple jigs and more.
Check Stock

Olympia Tools Hitch Vise 38-652, 6 inches

  • GYROJAW: Clamp the unclampable! Clamp vertical tapers, compound angles and more with our Gyrojaw. Works with any vise. Works with pieces angled up to 25-degrees. Strong, compact design will last a lifetime..
  • USAGE: Hold Gyrojaw to the flat side of an angled work piece and tighten vise with the other hand. The steel stud makes contact with the vise jaw and rotates as needed until the vise is tightened completely..
  • MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials..
  • THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches..
  • SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair..
Check Stock

SE - Pin Vise Set, 4 Pc - 846PV

  • 【High Quality】- Double ended pin vise made of metal materials, durable and practical..
  • 【Hand Pin Vise】- Double Ended Pin Vise made of strongly materials offers superior performance and easy to use..
  • 【Anti-Slip Design】- The uneven design of the arm is more in line with human mechanics.Better for power, no sliding..
  • 【Multipurpose】- Perfect for wood, also for plastic, walnut, amber, beads, beeswax, olive nut, small model kit etc..
  • 【Not Only A Drill Tool】 - Pin vise able to clamp steel line and twist it into the shape you need, and also useful for electronic assembling, tool-making, model making and DIY..
Check Stock