Top Round Aluminium Pipe

6 Pieces Balaclava Face Cover Sun Protection Cover Breathable Long Neck Cover for Outdoor Activities (Black, White, Coffee, Dark Blue, Navy Blue, Grey)

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
  • NOTE : This fixture NDS part#11 is a 4” round grate to fit 4” S & D fitting as well as Pipe in S & D as well as corrugated pipe.
Check Stock

Heating Mantle LED Digital Lab Hotplate up to 380℃ (716℉) with Temperature contorl for Scientific Laboratory Liquid Heating -US Plug (5000ml)

  • Reinforced thermal isolation allowing maximum yield, safety and power saving Uniform heat distribution due to product quality, expressed in heat yield and perfect flask running.
  • Round bottom flask. Aluminium body. Finishing in epoxy (polyoxide).
  • Designed for use with Round Bottom Flasks. Epoxy coated aluminium housing. Replaceable, flexible heater cartridge. Maximum temperature 450 C. For use with 250ml Round Bottom Flasks.
  • Power: 200w. Available in 115v and 230v 50-60 Hz..
  • Includes electronic power controller which acts by impulse with adjustable timing through a pilot lamp..
Check Stock

NDS 50 6

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Place on top of drain pipe, drain fitting, or Spee-D Basin for a soil-tight fit. 6 in. Round Drain Grates are available in a variety of colors and materials.
  • Comes with one 6 in. Round Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
  • Fits Spee-D Catch Basin Drain, 6 in. Sewer and Drain Pipe & Fittings, 6 in. Single-Wall Corrugated Pipe. 28 GPM flow rate. 9.1 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Check Stock

NDS 11 Round Grate, 4-Inch, Fits 4 in. Drain Pipes & Fittings, Black Plastic

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
  • Comes with one 4 in. Round Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Check Stock

Slide-Co 171786 Awning Operator Crank Handle, 3/8 inch Bore, Aluminum

  • Popular for visible architectural applications such as window frames, door frames, roofs, and sign frames.
  • Most common alloy used for aluminium extrusion.
  • 50cm( 19.7 inch) length 6063 Aluminium Alloy( Al--Si) Round Tube, outer diameter( OD) varies from 8mm to 20 mm.
  • Allows complex shapes to be formed with very smooth surfaces fit for anodizing.
  • Has good mechanical properties, is treatable and weldable, similar to the British aluminium alloy HE9.
Check Stock

Tube Bender Kit Refrigeration Ratcheting Tubing benders Hand Tool 1/4 to 7/8 Inch Aluminium Alloy Replacement Head

  • Elbow tubing diameter range: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6,8,10,12,16,19,22mm) O.D..
  • Easy to use: With a deburring tool for cleaning tubing, quick change bending mandrels and heads..
  • Complete ratchet hand bend kit: Aluminium alloy bender heads, uneasy to damage, solid and durable, prevent pipe deformation. Professional tool for commercial or occasional use..
  • Applications: sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • Package Include: 1x Tube Bender, 1x Pipe Cutter, 1x Deburring Tool With Extra Blade, 2x Fixed Supports, 7x Tube Bender Heads, 1x Carrying Box..
Check Stock

DOMINOX 2 1/2'' O.D. DM-317-64 pipe cutter, professional cutting PEX, PVC, and PPR Pipe, etc, Sk5 blade and aluminum alloy body, one-hand rapid cutting tool for the pipe.

  • HIGH QUALITY MATERIAL: pvc pipe cutter with SK5 blades coated with PTFE for rust resistance, hardness to HRC55 and low cutting friction. The rubberised aluminium plated die-cast handle is strong and lightweight..
  • ADVANCED STRUCTURAL DESIGN: The triangular blade of the DOMINOX PVC cutter penetrates the pipe wall with less pressure, causing less damage to the pipe and less damage to the hand. The excellent ratchet mechanism allows the user to quickly complete the opening and closing cutting operation with one hand. The ergonomic rubber-wrapped handle saves effort and continuous work without injury to the hand..
  • HUMANIZED DETAILS: The bottom of the handle is equipped with a safety latch for easier and safer storage. Easy and quick blade change, no special tools required..
  • WIDE APPLICATION RANGE: DOMINOX pipe cutters can cut a wide range of pipes with an outside diameter of 2-1/2.
Check Stock

HAUTMEC Pro 1 Inch Automatic Copper Tube Cutter - 1 in. Maximum Nominal Pipe Capacity (1-1/8 in. Outer Diameter), for PVC, Copper, Aluminum and Thin Stainless Steel Tube HT0217-PL

  • HAUTMEC Automatic Tubing/pipe Cutters makes cutting easy and smooth with higher efficiency and less burrs.
  • a good tool to help professionals or beginers' work significantly easier and more manageable.
  • automatically tightens and cuts as it turns with one-hand operation.
  • Heavy duty zinc alloy construction for long-lasting durability.
  • chorme rollers for precision cuts operation.
  • vacuum heat-treated spring-loaded cutting blade features excellent cutting performance.
  • Non-slip ergonomic grip allows better handling and powerful turning, adding comfort and making everything under control.
  • Wide Applications: 1/2 in. maximum nominal pipe capacity.
  • suitable for cutting copper, aluminium, thin-walled stainless steel pipes and other thin pipe or tubes.
Check Stock

20 Pack Brass Pipe Screens 1/2 inch Metal Bowl Screen for Pipes

  • 【Pipe screens Material】Brass pipe screens are made of premium brass. it’s durable to use. The bowl screens edge are thickness and smooth, which could be easily to install in pipes..
  • 【Pipe screens 1/2 inch】Screen for pipes 1/2 inch- Inner diameter 0.5 inch, Outer diameter: 0.63 inch. They can fit most pipes. The pipe screen filters are good gift choice for your family and friends..
  • 【Perfectly in shape】Our pipe filters are perfectly cutting and round edges. The brass ring around the top to maintain bowl shape, right into your pipe..
  • 【Function】Pipe screen prevent clogging and stop hot ash or embers from entering the pipe. Also allow the fresh air flow freely and evenly burning.
  • 【Quality guarantee】The pipe screens are sturdy and saving your time for cleaning pipes. If any questions please contact us freely, we will response you within 24hr..
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

AMZCNC Pipe Tube Bender 3/8″ to 1″, Manual Tube Bender with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

  • Installed on a solid workbench, the operation is simple and labor-saving. Equipped with 7 sets of 180° elbow dies The pipe bending effect is good, and the pipe is not easy to deform. Wide range of applications: various grades of U-bends, reverse bends, goosenecks and connecting bends The mold is made of ductile iron, with stable performance and durability..
  • Durable Material: The pipe bender is made of 40CR steel and 45# steel with rigorous craftsmanship. This product is in possess of great comprehensive performance, strength, and corrosion resistance . Great Capacity: The long handle bends pipe with its wall thickness stock up to 2.0mm.
  • Its Pipe Diameter Range :3/8“-1“（10mm-25）..
  • 7 Round Dies Size: 7 dies inside this bender that can be utilized for customizing brackets and supporting other parts on the working field. 3/8“，1/2”，9/16“，5/8”，3/4“，7/8”，1“. Wall Thickness of Pipe :0.03”-0.078”..
  • Ergonomic Handle: The long handle with rubber covered allows better leverage and operation, the extendable lever will increase the pressure you apply to the metal..
  • Compact & Portable: Compact design allows versatility, can make a variety of bends on square or solid round stock, light weight enough..
Check Stock

PREXISO Anti Shock Spirit Level with Magnetic 600mm (24'') PAS600M

  • Accuracy: 0.5mm/m, 3 easy view vials: 90°, 90° & 180°.
Check Stock