Top Round Die Holder - BuyWiseBest.com

LEE PRECISION 90963 9-mm Carbide 4-Die Set Luger Grey

Includes Carbide Full Length Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and....

【Round Die】- Thread size: M6 x 1.0mm.
Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..

300 AAC Blackout Very Limited Production 3-Die Set.
Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and....

ncludes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: These dies can be used to reload 44 Magnum and 445 Super Mag..

300 AAC Blackout Very Limited Production 3-Die Set.
Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....

Includes carbide full-length sizing die, bullet seating die, and powder through expanding die.
Has a universal shell holder and powder dipper.
Also includes an instruction manual and a load data sheet.

Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

...sign】Raise or lower height adjustment from 48" inch to 63'' inches. Telescopicboom arm pole length can be adjusted from 17" to 33" and 175°rotation. Also, the stand used USA standard 3/8 thread screw head, and coming with a 3/8" to 5/8" adapter for mounting most microphone and shock mount..
【Reliable Microphone Holder】Made of premium steel, the upgraded steel pipe is thickened to 2mm, compared to only 1mm thick of other stands on the market, sturdy enough to support your microphones, not easy to become deformed. Weighted steel round base is stable to stabilize most mics indoors or outdoors..
【Convenient Detachable Design】 This microphone stand with boom arm can be disassembled into three parts and easy carrying and assembly. It is also built compactly to be both durable for long term use. Perfect mic holder for stage, studio, road show, concert, outdoor performances and more..