Top Round Die Stock

Eureka Back to School 'You Can Tucan' Tropical Birds Welcome Bulletin Board and Classroom Decorations, 21pc, 17'' W x 24'' H

  • Set includes (1) Welcome Sign, (1) Blank Poster, (3) Round Decorative Frames and (16) Various Die-Cut pieces.
  • Packaged as (4) 17” W x 24” H panels in a polybag with header. Perfect as back to school teacher supplies!.
  • Welcome your students back to school with our Eureka Tropical Birds Classroom Decorations..
  • These pieces have an easy punch out design and are printed on heavy weight card stock so you can use them year after..
  • These tropical classroom decorations coordinate well with our ”You Can Toucan” collection..
Check Stock

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

Drillco 2000R Series 20 Piece High-Speed Steel Tap and Carbon Steel Round Adjustable Die Set, Uncoated (Bright) Finish, UNC Thread

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Comes in an attractive, hand made, wooden case.
  • Set includes : 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Comes with 1-1/2-inches round die stock, #7 to 1/2 adjustable tap wrench, #12 to 1/2-inches t-handle tap wrench, and 1 screwdriver.
Check Stock

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

  • 【Round Die】- Thread size: M6 x 1.0mm.
  • Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
  • 【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
  • 【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
  • 【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • 【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..
Check Stock

Hot Foil Plate Merry Christmas Glimmer Phrases Decoration forScrapbooking Embossing Paper Cards Crafts

  • Made from durable material and unique design. Christmas cutting dies christmas dies for card making christmas dies merry die die cuts for card making.
  • Wide Application: Die cuts Metal Cutting Dies is Suitable for Scrapbooking, Paper Card, Embossing, Album,card stock. DIY Craft, ect. Use dies to create incredible shapes from your favourite cardstock and paper, Make card and scrapbook designs to be totally unique, and even layer these up to add extra dimension. excellent for cropping photos precisely, They are also great for making stencils, or layered to produce a stunning 3D effect..
  • A graceful cutting die for all types of cards (photo album, DIY craft,scrapbooking, paper card) Great must-have set, item works with virtually any die-cutting machine that will accommodate wafer-thin dies and are sure to become an essential ingredient in your paper crafting process.
  • Makes Great Stencils - Perfect for Creating Gift This beautiful design is a stunning way to impress your loved ones, adding a wonderfully intricate feature to embellish your papercraft projects. This will be perfect for cards celebrating a range of occasions. You'll have the perfect die-cut design to add to your papercraft masterpieces!.
  • 100% REFUND GUARANTEE: If you are not satisfied with the pr....
Check Stock

Lace Border Die Cuts Hollow Square Metal Cutting Die Stencils Background Die Cuts for Card Making Scrapbooking Embossing Template Mould DIY Craft Album Paper Décor

  • Material - made of high toughness carbon steel, sturdy and durable, light and thin, easy to use..
  • Application - Use the die cuts to create beautiful festival atmosphere, add a unique embellish to your craft projects, such as scrapbook, greeting....
  • Easy To Use - Cutting Dies or cut shapes from a variety of materials including paper, cardstock, chipboard, specialty paper and more!.
  • Widely Use - Die cuts metal cutting dies is suitable for scrapbooking, paper card, embossing, album,card stock. Diy craft, ect. Make card and....
  • Size - 7.7*7.7cm / 3.03*3.03 Inch.The die cuts are work with most die cutting machines..
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Blacksmith Forging Tools Knife Making Tongs Set Fire Tongs Anvil Blacksmithing Tongs Forge Tools Includes V-Bit Bolt Tongs, Wolf Jaw Tongs, Flat Tongs, Blade Tongs (Pack of 4)

  • Bolt Tongs: Designed with deep V Groves in the jaws to ensure your flat stock stays deadlocked while providing heavy hammer blows. Extremely versatile and effective in respect to holding 5/8'' square and round stock..
  • Blade Tongs: This allows you to clamp the knife in various positions when drawing out the blade. Sturdy, durable, and versatile these tongs will handle a variety of stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide..
  • Flat Tongs: For 1/4 inches Flat Stock. It's superior to pliers or vise grips for holding hot metal (forgings) since Flat tongs have large flat smooth jaw surfaces that do not scratch the workpieces..
  • Wolf Jaw tongs: Designed for holding a variety of stock sizes including Flat, Square, and Round stock. Perfect for the needs in the shop, at home, or in the field and essential in many situations. One of the tongs commonly used by blacksmiths..
  • Heavy Type Steel Construction: Sturdy and durable steel craft, finished with non-slip wax to protect from rust and corrosion for long-lasting reliability. Round stock providing the user with a comfortable grip. All tongs measure approximately 15.16 to 16.26 inches making them easy to operate in addition to keeping your hands a safe distance from the forge when removing steel. Spe....
Check Stock

Knife Making Tongs Set Bladesmith Blacksmith Knife Tong Anvil Vise Forge (4 Tongs)

  • 【Professional-Grade Steel Jaws】These tongs are forged with heavy-duty steel and finished with linseed oil to protect from rust and corrosion. They can fully articulate and supply exceptional vise gripping strength on the work-piece during heavy hammer bufftes..
  • 【Flat Tongs】Flat Tongs For 1/4 inch flat stock. The jaws of the pliers have a smooth surface that will not scratch the workpiece..
  • 【V Bit Tongs】Designed to hold 5/8'' square and round stock. Designed with a deep V Grove to ensure that your buttstock remains deadlocked while being able to withstand heavy hammering. Extremely versatile tongs..
  • 【Blade Tongs】For flat stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide. Designed to hold the majority of stock sizes according to knife making..
  • 【Wolf Jaw tongs】Designed for holding a variety of stock sizes including Flat, Square and Round stock. Offering a superior grip. It is very suitable for reaching inconvenient areas and is essential in many cases..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

SWAG Off Road Tubing Roller Dies Compatible With Harbor Freight Tube Roller 2.00 Square Dies

  • We currently have 67 different Die Sets in stock.
  • Each die set is 100% CNC machined out of 1018 steel for a precise fit.
  • Due to many operator controlled variables there is no warranty on our dies.
  • PLEASE SEE RECOMENDED UPGRADES IN THE DESCRIPTION BELOW.
Check Stock