Top Router Milling Machine
Lenink 4 Pack Mini T Track Hold Down Clamps, T-Track Clamp Compatible with 3018-PRO,3018-MX3,3018-PROVer,1810-PRO CNC Router Machine
- Compatibility: The T-Track clamp kit is compatible with 3018-PRO/3018-MX3/3018-PROVer/1810-PRO CNC router machine, it can hold most of the materials of a desktop CNC router machine.
- Portable and Practical: Adjustable T Track hold down clamps are very easy to install, can accommodate 30mm materials and hold them firmly in place.
- Wide Range of Use: Not only suitable for 3018 series desktop CNC router machines, but also suitable for positioning and fixing other woodworking or metalworking, such as drill presses, CNC, table saws, routers, jigs, vertical milling machines, etc.
- Strong and Sturdy: Made of high quality zinc-aluminum alloy, strong and wear-resistant, long service life.
- Packaging Includes: 4 Pcs T-Track hold down clamps (Need to assemble by yourself). 6 months super long warranty period.
Check StockMilling Cutter Bearings Replacement Kit, Bearing Replacement Set 1 1/8 Outer Dia Compact Top Mounted for Shank for Head
- Good Quality Steel Material: Made of good quality steel material, fast and easy to use, possess high strength, good toughness, uniform material bring high working reliability.
- Compact Shape: This router bit bearing come with compact shape, easy to carry, convenient for you to store and use.
- 28.6mm Bearing Diameter: The bearing diameter is 28.6mm, equipped with screw and hex wrench for easy installation and disassembly.
- For Milling Cutter Heads And Tool Holders: Durable steel bearing accessories are suitable for milling cutter heads and tool holders, very practical.
- Replace Or Repair Damaged Or Missing Bearings: Milling cutter bearing replacement kit can be used to replace or repair damaged or missing router bit bearings.
Check StockEANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”
- UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
- SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
- The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check StockEANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving
- Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
- PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
- The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check StockSpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
- The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
- For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
- The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stockuxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check StockSpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
- The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
- For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
- The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockLAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design
- ...ngraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
- ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
- ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
- ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quieter and more steady and is ideal for intricate patterns..
Check StockSpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length
- Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
- The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
- For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
- The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stockuxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check StockWoodhaven 3000 27 Planing Sled
- Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from....
- 27" wide maximum capacity, 36" Ultra Track rails & 16" Double Track rails.
- 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between....
- Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has....
- Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check StockSpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch
- Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
- The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
- For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
- The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock